1632069R-FCC-RF Exposure-Archer C1200-V1.1-2016-07-05

FCC ID: TE7C1200

Users Manual

Download: PDF
FCCID_3114156

RF Exposure Evaluation Declaration Product Name : AC1200 Wireless Dual Band Gigabit Router Model No. : Archer C1200 FCC ID : TE7C1200 Applicant : TP-LINK TECHNOLOGIES CO., LTD. Address : Building 24(floors1,3,4,5) and 28(floors1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China Date of Receipt : Mar. 16, 2016 Issued Date : Jun. 30, 2016 Report No. : 1632069R-RF-US-P20V01 Report Version : V1.1 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF,CNAS or any agency of the government. The test report shall not be reproduced without the written approval of QuieTek Corporation.

Report No: 1632069R-RF-US-P20V01 Tes t R e p o r t C e r t i f i c a t i o n Issued Date : Jun. 30, 2016 Report No. : 1632069R-RF-US-P20V01 Product Name : AC1200 Wireless Dual Band Gigabit Router Applicant : TP-LINK TECHNOLOGIES CO., LTD. Address : Building 24(floors1,3,4,5) and 28(floors1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China Manufacturer : TP-LINK TECHNOLOGIES CO., LTD. Address : Building 24(floors1,3,4,5) and 28(floors1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China Model No. : Archer C1200 FCC ID : TE7C1200 Brand Name : TP-LINK EUT Voltage : AC 100-240V, 50/60Hz Applicable Standard : KDB 447498D01V06 FCC Part1.1310(b) Test Result : Complied Performed Location : Quietek Corporation - Suzhou EMC Laboratory No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Registration Number: 800392 Documented By : ( Adm. Specialist: Kathy Feng ) Reviewed By : (Senior Engineer: Frank He ) Approved By : (Engineering Manager : Harry Zhao ) Page: 2 of 9

Report No: 1632069R-RF-US-P20V01 Laboratory Information We, QuieTek Corporation, are an independent EMC and safety consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted(audited or listed) by the following related bodies in compliance with ISO 17025, EN 45001 and specified testing scope: Taiwan R.O.C. : BSMI, NCC, TAF USA : FCC Japan : VCCI China : CNAS The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site : http://www.quietek.com/english/about/certificates.aspx?bval=5 The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/index_en.aspx If you have any comments, Please don’t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory : No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : service@quietek.com LinKou Testing Laboratory : No.5-22, Ruishukeng, Linkou Dist., New Taipei City 24451, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : service@quietek.com Suzhou Testing Laboratory : No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL : +86-512-6251-5088 / FAX : 86-512-6251-5098 E-Mail : service@quietek.com Page: 3 of 9

Report No: 1632069R-RF-US-P20V01 History of This Test Report REPORT NO. VERSION DESCRIPTION ISSUED DATE 1632069R-RF-US-P20V01 V1.0 Initial Issued Report Jun. 23, 2016 1632069R-RF-US-P20V01 V1.1 Modify frequency range in 2.4G Jun. 30, 2016 Page: 4 of 9

Report No: 1632069R-RF-US-P20V01 1. RF Exposure Evaluation 1.1. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Electric Magnetic Power Average Frequency Field Field Density Time Range (MHz) Strength Strength (mW/cm2) (Minutes) (V/m) (A/m) (A) Limits for Occupational/ Control Exposures 300-1500 -- -- F/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/ Uncontrolled Exposures 300-1500 -- -- F/1500 6 1500-100,000 -- -- 1 30 F= Frequency in MHz Friis Formula Friis transmission formula: Pd = (Pout*G)/(4*pi*r2) Where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Page: 5 of 9

Report No: 1632069R-RF-US-P20V01 1.2. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. The temperature and related humidity: 18℃and 78％ RH. 1.3. Test Result of RF Exposure Evaluation Product : AC1200 Wireless Dual Band Gigabit Router Test Item : RF Exposure Evaluation Test Site : AC-6 Antenna Gain: For 2.4G Model No. N/A Antenna manufacturer TP-LINK Antenna Delivery 1*TX+1*RX 2*TX+2*RX 3*TX+3*RX Antenna technology SISO Basic MIMO CDD Beam-forming Antenna Type External Dipole PIFA PCB Internal Ceramic Chip Antenna Metal plate type F antenna Antenna Gain ANT0:1.63dBi, ANT1:1.95dBi Directional Gain For other modes: 1.95dBi for Power test, 2.25dBi for PSD test. Page: 6 of 9

Report No: 1632069R-RF-US-P20V01 For 5G Antenna Model Dipole Antenna Antenna Manufacturer TP-Link Antenna Delivery 1*TX+1*RX 2*TX+2*RX 3*TX+3*RX Antenna Technology SISO Basic methodology with NANT transmit antennas Sectorized antenna systems Cross-polarized antennas MIMO Unequal antenna gains, with equal transmit powers Spatial Multiplexing Cyclic Delay Diversity (CDD) Antenna Type Dipole Antenna Antenna Information Ant Gain/ Directional Gain No. Ant Type (dBi) Antenna 0 SISO Antenna 1 Antenna 2 Dipole Antenna 5150-5250MHz 5725-5850MHz Basic Ant0: 2.69 Ant0: 2.94 Ant1: 2.33 Ant1: 2.30 Dipole Antenna For power: 2.69 For power: 2.94 CDD For PSD: 2.99 For PSD: 3.24 Beam-forming Page: 7 of 9

Report No: 1632069R-RF-US-P20V01 z Output Power into Antenna & RF Exposure Evaluation Distance: Standlone modes Maximum Output Power Density at Frequency Band Directional Gain Test Mode Power to R = 20 cm (MHz) (dBi) Antenna (dBm) (mW/cm2) 802.11b/g/n(20MHz) 2412-2462 29.94 2.25 0.3294 with CDD 802.11n(40MHz) 2422-2452 24.69 2.25 0.0983 with CDD 802.11a/n/ac 5180-5240 29.59 2.99 0.3604 (20MHz) with CDD 802.11n/ac (40MHz) 5190-5230 29.54 2.99 0.3562 with CDD 802.11ac(80MHz) 5210 23.75 2.99 0.0939 with CDD 802.11a/n/ac 5745-5825 29.91 3.24 0.4109 (20MHz) with CDD 802.11n/ac (40MHz) 5755-5795 29.71 3.24 0.3924 with CDD 802.11ac(80MHz) 5775 29.79 3.24 0.3997 with CDD Page: 8 of 9

Report No: 1632069R-RF-US-P20V01 Simultaneous transmission: Maximum Output Power Density at Frequency Band Directional Gain Power to R = 20 cm (MHz) (dBi) Antenna (dBm) (mW/cm2) 2412-2462 29.94 2.25 0.3294 5180-5240 29.91 3.24 0.4109 5745-5825 Simultaneous transmission power density 0.7403 So according to transmission formula: Pd = (Pout*G)/(4*pi*r2) and the power density limit according to KDB 447498D01V06 and FCC Part1.1310(b), the limit is 1mW/cm2 Safety Distance Calculation Formula: The power flux: P*G (θ ,φ ) S= 4*π *r 2 So safety distance as following: P *G r= 4*π *S P = input power of the antenna G = antenna gain relative to an isotropic antenna θ, Ф = elevation and azimuth angles. r = distance from the antenna to the point of investigation Maximum Limit of Power Frequency Range Safety Distance EIRP Density (MHz) r(cm) (dBm) S(mW/cm2) 2412-2462 32.19 1 5180-5240 12.82 33.15 1 5745-5825 Note: The safety distance is 12.82cm for AC1200 Wireless Dual Band Gigabit Router without any other radio equipment. The End Page: 9 of 9


Document Created: 2016-06-30 16:33:51
Document Modified: 2016-06-30 16:33:51
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC