1808RSU004-U1-FCC DTS Test Report-Wi-Fi Rev2_Part4

FCC ID: TE7AX6000

Test Report

Download: PDF
FCCID_4076930

Report No.: 1808RSU004-U1 802.11b Out-of-Band Emissions - Ant 3 / Ant 0 + 1 + 2 + 3 Channel 11 (2462MHz) 100kHz PSD reference Level High Band Edge Spurious Emission FCC ID: TE7AX6000 Page Number: 91 of 340

Report No.: 1808RSU004-U1 802.11g Out-of-Band Emissions - Ant 3 / Ant 0 + 1 + 2 + 3 Channel 01 (2412MHz) 100kHz PSD reference Level Low Band Edge Spurious Emission Channel 06 (2437MHz) 100kHz PSD reference Level Spurious Emission FCC ID: TE7AX6000 Page Number: 92 of 340

Report No.: 1808RSU004-U1 802.11g Out-of-Band Emissions - Ant 3 / Ant 0 + 1 + 2 + 3 Channel 11 (2462MHz) 100kHz PSD reference Level High Band Edge Spurious Emission FCC ID: TE7AX6000 Page Number: 93 of 340

Report No.: 1808RSU004-U1 802.11n-HT20 Out-of-Band Emissions - Ant 3 / Ant 0 + 1 + 2 + 3 Channel 01 (2412MHz) 100kHz PSD reference Level Low Band Edge Spurious Emission Channel 06 (2437MHz) 100kHz PSD reference Level Spurious Emission FCC ID: TE7AX6000 Page Number: 94 of 340

Report No.: 1808RSU004-U1 802.11n-HT20 Out-of-Band Emissions - Ant 3 / Ant 0 + 1 + 2 + 3 Channel 11 (2462MHz) 100kHz PSD reference Level High Band Edge Spurious Emission FCC ID: TE7AX6000 Page Number: 95 of 340

Report No.: 1808RSU004-U1 802.11n-HT40 Out-of-Band Emissions - Ant 3 / Ant 0 + 1 + 2 + 3 Channel 03 (2422MHz) 100kHz PSD reference Level Low Band Edge Spurious Emission Channel 06 (2437MHz) 100kHz PSD reference Level Spurious Emission FCC ID: TE7AX6000 Page Number: 96 of 340

Report No.: 1808RSU004-U1 802.11n-HT40 Out-of-Band Emissions - Ant 3 / Ant 0 + 1 + 2 + 3 Channel 09 (2452MHz) 100kHz PSD reference Level High Band Edge Spurious Emission FCC ID: TE7AX6000 Page Number: 97 of 340

Report No.: 1808RSU004-U1 802.11ac-VHT20 Out-of-Band Emissions - Ant 3 / Ant 0 + 1 + 2 + 3 Channel 01 (2412MHz) 100kHz PSD reference Level Low Band Edge Spurious Emission Channel 06 (2437MHz) 100kHz PSD reference Level Spurious Emission FCC ID: TE7AX6000 Page Number: 98 of 340

Report No.: 1808RSU004-U1 802.11ac-VHT20 Out-of-Band Emissions - Ant 3 / Ant 0 + 1 + 2 + 3 Channel 11 (2462MHz) 100kHz PSD reference Level High Band Edge Spurious Emission FCC ID: TE7AX6000 Page Number: 99 of 340

Report No.: 1808RSU004-U1 802.11ac-VHT40 Out-of-Band Emissions - Ant 3 / Ant 0 + 1 + 2 + 3 Channel 03 (2422MHz) 100kHz PSD reference Level Low Band Edge Spurious Emission Channel 06 (2437MHz) 100kHz PSD reference Level Spurious Emission FCC ID: TE7AX6000 Page Number: 100 of 340

Report No.: 1808RSU004-U1 802.11ac-VHT40 Out-of-Band Emissions - Ant 3 / Ant 0 + 1 + 2 + 3 Channel 09 (2452MHz) 100kHz PSD reference Level High Band Edge Spurious Emission FCC ID: TE7AX6000 Page Number: 101 of 340

Report No.: 1808RSU004-U1 802.11ax-HE20 Out-of-Band Emissions - Ant 3 / Ant 0 + 1 + 2 + 3 Channel 01 (2412MHz) 100kHz PSD reference Level Low Band Edge Spurious Emission Channel 06 (2437MHz) 100kHz PSD reference Level Spurious Emission FCC ID: TE7AX6000 Page Number: 102 of 340

Report No.: 1808RSU004-U1 802.11ax-HE20 Out-of-Band Emissions - Ant 3 / Ant 0 + 1 + 2 + 3 Channel 11 (2462MHz) 100kHz PSD reference Level High Band Edge Spurious Emission FCC ID: TE7AX6000 Page Number: 103 of 340

Report No.: 1808RSU004-U1 802.11ax-HE40 Out-of-Band Emissions - Ant 3 / Ant 0 + 1 + 2 + 3 Channel 03 (2422MHz) 100kHz PSD reference Level Low Band Edge Spurious Emission Channel 06 (2437MHz) 100kHz PSD reference Level Spurious Emission FCC ID: TE7AX6000 Page Number: 104 of 340

Report No.: 1808RSU004-U1 802.11ax-HE40 Out-of-Band Emissions - Ant 3 / Ant 0 + 1 + 2 + 3 Channel 09 (2452MHz) 100kHz PSD reference Level High Band Edge Spurious Emission FCC ID: TE7AX6000 Page Number: 105 of 340

Report No.: 1808RSU004-U1 7.6. Radiated Spurious Emission Measurement 7.6.1.Test Limit All out of band emissions appearing in a restricted band as specified in Section 15.205 of the Title 47 CFR must not exceed the limits shown in Table per Section 15.209. FCC Part 15 Subpart C Paragraph 15.209 Frequency Field Strength Measured Distance [MHz] [uV/m] [Meters] 0.009 - 0.490 2400/F (kHz) 300 0.490 - 1.705 24000/F (kHz) 30 1.705 - 30 30 30 30 - 88 100 3 88 - 216 150 3 216 - 960 200 3 Above 960 500 3 7.6.2.Test Procedure Used ANSI C63.10 Section 6.3 (General Requirements) ANSI C63.10 Section 6.4 (Standard test method below 30MHz) ANSI C63.10 Section 6.5 (Standard test method above 30MHz to 1GHz) ANSI C63.10 Section 6.6 (Standard test method above 1GHz) 7.6.3.Test Setting Quasi-Peak Measurements below 1GHz 1. Analyzer center frequency was set to the frequency of the radiated spurious emission of interest 2. Span was set greater than 1MHz 3. RBW = as specified in Table 1 4. Detector = CISPR quasi-peak or average 5. Sweep time = auto couple 6. Trace was allowed to stabilize FCC ID: TE7AX6000 Page Number: 106 of 340

Report No.: 1808RSU004-U1 Table 1 - RBW as a function of frequency Frequency RBW 9 ~ 150 kHz 200 ~ 300 Hz 0.15 ~ 30 MHz 9 ~ 10 kHz 30 ~ 1000 MHz 100 ~ 120 kHz > 1000 MHz 1 MHz Peak Measurements above 1GHz 1. Analyzer center frequency was set to the frequency of the radiated spurious emission of interest 2. RBW = 1MHz 3. VBW = 3MHz 4. Detector = peak 5. Sweep time = auto couple 6. Trace mode = max hold 7. Trace was allowed to stabilize Average Measurements above 1GHz (Method VB) 1. Analyzer center frequency was set to the frequency of the radiated spurious emission of interest 2. RBW = 1MHz 3. VBW; If the EUT is configured to transmit with duty cycle ≥ 98%, set VBW = 10 Hz. If the EUT duty cycle is < 98%, set VBW ≥ 1/T. T is the minimum transmission duration. 4. Detector = Peak 5. Sweep time = auto 6. Trace mode = max hold 7. Trace was allowed to stabilize FCC ID: TE7AX6000 Page Number: 107 of 340

Report No.: 1808RSU004-U1 7.6.4.Test Setup 9kHz ~ 30MHz Test Setup: 30MHz ~ 1GHz Test Setup: FCC ID: TE7AX6000 Page Number: 108 of 340

Report No.: 1808RSU004-U1 1GHz ~ 18GHz Test Setup: 18GHz ~25GHz Test Setup: FCC ID: TE7AX6000 Page Number: 109 of 340

Report No.: 1808RSU004-U1 7.6.5.Test Result AX6000 MU-MIMO Wi-Fi Product Temperature 26°C Router Test Engineer Dandy Li Relative Humidity 56% Test Site AC2 Test Date 2018/08/12 802.11b - Ant 0 + 1 + 2 + 3 Test Mode: Test Channel: 01 (CDD Mode) Remark: 1. Average measurement was not performed if peak level lower than average limit. 2. Other frequency was 20dB below limit line within 1-18GHz, there is not show in the report. Mark Frequency Reading Factor Measure Limit Margin Detector Polarization (MHz) Level (dB) Level (dBμV/m) (dB) (dBμV) (dBμV/m) 4825.0 44.4 5.6 50.0 74.0 -24.0 Peak Horizontal 7502.5 33.8 14.2 48.0 74.0 -26.0 Peak Horizontal * 8820.0 33.7 14.9 48.6 89.4 -40.8 Peak Horizontal * 10171.5 32.3 17.9 50.2 89.4 -39.2 Peak Horizontal 4824.0 51.4 5.6 57.0 74.0 -17.0 Peak Vertical 4824.0 47.9 5.6 53.5 54.0 -0.5 Average Vertical 7434.5 33.2 14.3 47.5 74.0 -26.5 Peak Vertical * 9636.0 31.7 16.2 47.9 89.4 -41.5 Peak Vertical * 10180.0 32.4 17.9 50.3 89.4 -39.1 Peak Vertical Note 1: “*” is not in restricted band, its limit is 30dBc of the fundamental emission level (119.4dBμV/m) or 15.209 which is higher. Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB) FCC ID: TE7AX6000 Page Number: 110 of 340

Report No.: 1808RSU004-U1 AX6000 MU-MIMO Wi-Fi Product Temperature 26°C Router Test Engineer Dandy Li Relative Humidity 56% Test Site AC2 Test Date 2018/08/12 802.11b - Ant 0 + 1 + 2 + 3 Test Mode: Test Channel: 06 (CDD Mode) Remark: 1. Average measurement was not performed if peak level lower than average limit. 2. Other frequency was 20dB below limit line within 1-18GHz, there is not show in the report. Mark Frequency Reading Factor Measure Limit Margin Detector Polarization (MHz) Level (dB) Level (dBμV/m) (dB) (dBμV) (dBμV/m) 4876.0 49.8 5.6 55.4 74.0 -18.6 Peak Horizontal 4876.0 47.9 5.6 53.5 54.0 -0.5 Average Horizontal 8165.5 32.4 14.4 46.8 74.0 -27.2 Peak Horizontal * 8803.0 32.6 14.9 47.5 90.6 -43.1 Peak Horizontal * 9670.0 31.4 16.5 47.9 90.6 -42.7 Peak Horizontal 4876.0 46.7 5.6 52.3 74.0 -21.7 Peak Vertical 8386.5 33.9 13.8 47.7 74.0 -26.3 Peak Vertical * 9678.5 32.0 16.4 48.4 90.6 -42.2 Peak Vertical * 10307.5 33.1 18.4 51.5 90.6 -39.1 Peak Vertical Note 1: “*” is not in restricted band, its limit is 30dBc of the fundamental emission level (120.6dBμV/m) or 15.209 which is higher. Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB) FCC ID: TE7AX6000 Page Number: 111 of 340

Report No.: 1808RSU004-U1 AX6000 MU-MIMO Wi-Fi Product Temperature 26°C Router Test Engineer Dandy Li Relative Humidity 56% Test Site AC2 Test Date 2018/08/12 802.11b - Ant 0 + 1 + 2 + 3 Test Mode: Test Channel: 11 (CDD Mode) Remark: 1. Average measurement was not performed if peak level lower than average limit. 2. Other frequency was 20dB below limit line within 1-18GHz, there is not show in the report. Mark Frequency Reading Factor Measure Limit Margin Detector Polarization (MHz) Level (dB) Level (dBμV/m) (dB) (dBμV) (dBμV/m) 4924.0 52.4 5.6 58.0 74.0 -16.0 Peak Horizontal 4924.0 47.9 5.7 53.6 54.0 -0.4 Average Horizontal 8310.0 33.4 13.8 47.2 74.0 -26.8 Peak Horizontal * 8769.0 33.0 14.8 47.8 92.1 -44.3 Peak Horizontal * 9746.5 33.1 16.8 49.9 92.1 -42.2 Peak Horizontal 4924.0 52.2 5.6 57.8 74.0 -16.2 Peak Vertical 4924.0 47.9 5.7 53.6 54.0 -0.4 Average Vertical 8310.0 33.3 13.8 47.1 74.0 -26.9 Peak Vertical * 8735.0 33.1 14.6 47.7 92.1 -44.4 Peak Vertical * 9653.0 33.0 16.4 49.4 92.1 -42.7 Peak Vertical Note 1: “*” is not in restricted band, its limit is 30dBc of the fundamental emission level (122.1dBμV/m) or 15.209 which is higher. Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB) FCC ID: TE7AX6000 Page Number: 112 of 340


Document Created: 2018-11-16 11:50:40
Document Modified: 2018-11-16 11:50:40
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC