13. MPE

FCC ID: TE7AX10

RF Exposure Info

Download: PDF
FCCID_4370876

FCC RF EXPOSURE REPORT FCC ID: TE7AX10 Project No. : 1905C079 Equipment : AX1500 Wi-Fi 6 Router Model Name : Archer AX10, Archer AX1500 Series Model : N/A Applicant : TP-Link Technologies Co., Ltd. Address : Building 24(floors1,3,4,5) and 28(floors1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China According : FCC Guidelines for Human Exposure IEEE C95.1 & FCC Part 2.1091 BTL INC. No.3, Jinshagang 1st Road, Shixia, Dalang Town, Dongguan, Guangdong, China. TEL: +86-769-8318-3000 FAX: +86-769-8319-6000 Report No.: BTL-FCCP-3-1905C079 Page 1 of 5 Report Version: R00

1. GENERAL SUMMARY Equipment : AX1500 Wi-Fi 6 Router Brand Name : tp-link Test Model : Archer AX10, Archer AX1500 Series Model : N/A Applicant : TP-Link Technologies Co., Ltd. Manufacturer : TP-Link Technologies Co., Ltd. Address : Building 24(floors1,3,4,5) and 28(floors1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China Date of Test : May 23, 2019 ~ Jul. 10, 2019 Test Sample : Engineering Sample No.: DG19061085 Standards : FCC Title 47 Part 2.1091, OET Bulletin 65 Supplement C The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. BTL-FCCP-3-1905C079) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of A2LA according to the ISO/IEC 17025 quality assessment standard and technical standard(s). Report No.: BTL-FCCP-3-1905C079 Page 2 of 5 Report Version: R00

2. MPE CALCULATION METHOD Calculation Method of RF Safety Distance: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Report No.: BTL-FCCP-3-1905C079 Page 3 of 5 Report Version: R00

Table for Filed Antenna: For 2.4GHz: Ant. Brand P/N Antenna Type Connector Gain (dBi) 1 3101502558 Dipole Weld 3.82 2 3101502557 Dipole Weld 3.82 Note: This EUT supports CDD, and all antennas have the same gain, Directional gain = GANT+Array Gain, where Array Gain is as follows: For power spectral density measurements, NANT = 2, NSS = 1. So Directional gain = GANT + Array Gain =10 log (NANT/ NSS) dB =3.82+10log(2/1)dBi=6.83. Then, the power density limit is 8-(6.83-6) = 7.17. For power measurements, Array Gain = 0 dB (NANT ≤ 4), so the Directional gain=3.82. For 5GHz: Antenna Specification: Gain Ant. Brand P/N Antenna Type Connector Note (dBi) 1 3101502560 I-PEX N/A 4.37 UNII-1 2 3101502559 I-PEX N/A 4.37 UNII-1 1 3101502560 I-PEX N/A 5.80 UNII-3 2 3101502559 I-PEX N/A 5.80 UNII-3 Note: 1. This EUT supports CDD, and all antennas have the same gain, Directional gain = GANT+Array Gain, where Array Gain is as follows: For UNII-1 Non-Beamforming function, For power spectral density measurements, NANT = 2, NSS = 1. So Directional gain = GANT + Array Gain =10 log (NANT/ NSS) dB =4.37+10log(2/1)dBi =7.38. Then, the power spectral density limit is 17-7.38+6=15.62. For power measurements, Array Gain = 0 dB (NANT ≤ 4), so the Directional gain=4.37. For UNII-3 Non-Beamforming function, For power spectral density measurements, NANT = 2, NSS = 1. So Directional gain = GANT + Array Gain =10 log (NANT/ NSS) dB =5.80+10log(2/1)dBi =8.81. Then, the power spectral density limit is 30-8.81+6=27.19. For power measurements, Array Gain = 0 dB (NANT ≤ 4), so the Directional gain=5.80. 2. For UNII-1 Beamforming function, Beamforming Gain: 3.00 dB. So Directional gain = 4.37+3.00=7.37. Then, output power limit is 30-7.37+6=28.63, the power density limit is 17-7.37+6=15.63. For UNII-3 Beamforming function, Beamforming Gain: 3.00 dB. So Directional gain = 5.80+3.00=8.80. Then, output power limit is 30-8.80+6=27.20, the power density limit is 30-8.80+6=27.20 Report No.: BTL-FCCP-3-1905C079 Page 4 of 5 Report Version: R00

3. TEST RESULTS Tune up tolerance(dBm) 2.4GHz 5GHz ±0.5 ±0.5 For 2.4GHz: Directional Directional Max. Output Max. Output Power Limit of Power Test Gain Gain Power Power Density (S) Density (S) Result (dBi) (numeric) (dBm) (mW) (mW/cm2) (mW/cm2) 3.82 2.4099 23.4 218.7762 0.10494 1 Complies For 5GHz Non-Beamforming (UNII-1): Directional Directional Max. Output Max. Output Power Limit of Power Test Gain Gain Power Power Density (S) Density (S) Result (dBi) (numeric) (dBm) (mW) (mW/cm2) (mW/cm2) 4.37 2.7353 26.52 448.7454 0.24432 1 Complies For 5GHz Non-Beamforming (UNII-3): Directional Directional Max. Output Max. Output Power Limit of Power Test Gain Gain Power Power Density (S) Density (S) Result (dBi) (numeric) (dBm) (mW) (mW/cm2) (mW/cm2) 5.80 3.8019 26.78 476.4310 0.36054 1 Complies For 5GHz With Beamforming (UNII-1): Directional Directional Max. Output Max. Output Power Limit of Power Test Gain Gain Power Power Density (S) Density (S) Result (dBi) (numeric) (dBm) (mW) (mW/cm2) (mW/cm2) 7.37 5.4576 26.56 452.8976 0.49198 1 Complies For 5GHz With Beamforming (UNII-3): Directional Directional Max. Output Max. Output Power Limit of Power Test Gain Gain Power Power Density (S) Density (S) Result (dBi) (numeric) (dBm) (mW) (mW/cm2) (mW/cm2) 8.80 7.5858 26.46 442.5884 0.66827 1 Complies For the max simultaneous transmission MPE: Power Density (S) Power Density (S) Limit of Power (mW/cm2) (mW/cm2) Total Density (S) Test Result 2.4GHz 5GHz (mW/cm2) 0.10494 0.66827 0.77321 1 Complies Note: The calculated distance is 20 cm. End of Test Report Report No.: BTL-FCCP-3-1905C079 Page 5 of 5 Report Version: R00


Document Created: 2019-07-24 13:38:35
Document Modified: 2019-07-24 13:38:35
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC