Test report

FCC ID: TBQT12-LR2W

Test Report

Download: PDF
FCCID_3933570

Shenzhen ZhongjianNanfang Testing Co., Ltd. Report No:CCISE180512301 1 Cover Page FCC REPORT Applicant: PORTMAN ELECTRONICS (DONGGUAN) CO., LTD. NO#10, Luyi 2 Road, Keyuancheng, Tangxia Town, Address of Applicant: DONGGUAN CITY, GUANGDONG PROVINCE CHINA 523718 Equipment Under Test (EUT) Product Name: CAR ALARM Model No.: 18TWLOR, 18TWPRLOR FCC ID: TBQT12-LR2W Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 Date of sample receipt: 31 May., 2018 Date of Test: 31 May., to 15 Jun., 2018 Date of report issued: 15 Jun., 2018 Test Result: PASS * * In the configuration tested, the EUT complied with the standards specified above. Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of theCCISproduct certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery orfalsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.

Report No: CCISE180512301 2 Version Version No. Date Description 00 15 Jun., 2018 Original Tested by: Date: 15 Jun., 2018 Test Engineer Reviewed by: Date: 15 Jun., 2018 Project Engineer Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1805123 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 2 of 40

Report No: CCISE180512301 3 Contents Page 1 COVER PAGE ....................................................................................................................................................... 1 2 VERSION ............................................................................................................................................................... 2 3 CONTENTS ........................................................................................................................................................... 3 4 TEST SUMMARY .................................................................................................................................................. 4 5 GENERAL INFORMATION .................................................................................................................................. 5 5.1 CLIENT INFORMATION ............................................................................................................................................ 5 5.2 GENERAL DESCRIPTION OF E.U.T........................................................................................................................ 5 5.3 TEST ENVIRONMENT AND MODE ............................................................................................................................ 6 5.4 DESCRIPTION OF SUPPORT UNITS ........................................................................................................................ 6 5.5 MEASUREMENT UNCERTAINTY.............................................................................................................................. 6 5.6 LABORATORY FACILITY.......................................................................................................................................... 6 5.7 LABORATORY LOCATION ....................................................................................................................................... 6 5.8 TEST INSTRUMENTS LIST ....................................................................................................................................... 7 6 TEST RESULTS ANDMEASUREMENT DATA ................................................................................................. 8 6.1 ANTENNA REQUIREMENT: ...................................................................................................................................... 8 6.2 CONDUCTED OUTPUT POWER .............................................................................................................................. 9 6.3 OCCUPY BANDWIDTH .......................................................................................................................................... 10 6.4 POWER SPECTRAL DENSITY ............................................................................................................................... 12 6.5 BAND EDGE ......................................................................................................................................................... 14 6.5.1 Conducted Emission Method...................................................................................................................... 14 6.5.2 Radiated Emission Method ......................................................................................................................... 16 6.6 SPURIOUS EMISSION ........................................................................................................................................... 22 6.6.1 Conducted Emission Method...................................................................................................................... 22 6.6.2 Radiated Emission Method ......................................................................................................................... 24 7 TEST SETUP PHOTO ........................................................................................................................................ 29 8 EUT CONSTRUCTIONAL DETAILS ................................................................................................................ 30 Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1805123 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 3 of 40

Report No: CCISE180512301 4 Test Summary Test Item Section in CFR 47 Result Antenna requirement 15.203/15.247 (c) Pass AC Power Line Conducted Emission 15.207 N/A Conducted Peak Output Power 15.247 (b)(3) Pass 6dB Emission Bandwidth 15.247 (a)(2) Pass Power Spectral Density 15.247 (e) Pass Band Edge 15.247(d) Pass Spurious Emission 15.205/15.209 Pass Pass: The EUT complies with the essential requirements in the standard. Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1805123 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 4 of 40

Report No: CCISE180512301 5 General Information 5.1 Client Information Applicant: PORTMAN ELECTRONICS (DONGGUAN) CO., LTD. Address: NO#10, Luyi 2 Road, Keyuancheng, Tangxia Town, DONGGUAN CITY, GUANGDONG PROVINCE CHINA 523718 Manufacturer/ Factory: PORTMAN ELECTRONICS (DONGGUAN) CO., LTD. Address: NO#10, Luyi 2 Road, Keyuancheng, Tangxia Town, DONGGUAN CITY, GUANGDONG PROVINCE CHINA 523718 5.2 General Description of E.U.T. Product Name: CAR ALARM Model No.: 18TWLOR, 18TWPRLOR Operation Frequency: 916.3 MHz Channel numbers: 1 Modulation technology: Lora Antenna Type: Helix Antenna Antenna gain: -1.25dBi Power supply: DC 3V(CR2450 Battery) Remark: Item No.: 18TWLOR, 18TWPRLOR were identical inside, the electrical circuit design, layout, components used and internal wiring, with only difference being model name and for different areas. Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1805123 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 5 of 40

Report No: CCISE180512301 5.3 Test environment and mode Operating Environment: Temperature: 24.0 C Humidity: 54 % RH Atmospheric Pressure: 1010 mbar Test mode: Operation mode Keep the EUT in continuous transmitting with modulation The sample was placed 0.8m(below 1GHz)/1.5m(above 1GHz) above the ground plane of 3m chamber. Measurements in both horizontal and vertical polarities were performed. During the test, each emission was maximized by: having the EUT continuously working, investigated all operating modes, rotated about all 3 axis (X, Y & Z) and considered typical configuration to obtain worst position, manipulating interconnecting cables, rotating the turntable, varying antenna height from 1m to 4m in both horizontal and vertical polarizations. The emissions worst-case are shown in Test Results of the following pages. Duty cycle setting during the transmission is 100% with maximum power setting for all modulations. 5.4 Description of Support Units N/A 5.5 Measurement Uncertainty Parameters Expanded Uncertainty Radiated Emission (9kHz ~ 30MHz) ±2.76 dB (k=2) Radiated Emission (30MHz ~ 1000MHz) ±4.28 dB (k=2) Radiated Emission (1GHz ~ 18GHz) ±5.72 dB (k=2) Radiated Emission (18GHz ~ 40GHz) ±2.88 dB (k=2) 5.6 Laboratory Facility The test facility is recognized, certified, or accredited by the following organizations:  FCC - Registration No.: 727551 Shenzhen Zhongjian Nanfang Testing Co., Ltd. has been accredited as a testing laboratory by FCC (Federal Communications Commission). The Registration No. is 727551.  IC - Registration No.: 10106A-1 The 3m Semi-anechoic chamber of Shenzhen Zhongjian Nanfang Testing Co., Ltd. has been Registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 10106A-1.  CNAS - Registration No.: CNAS L6048 Shenzhen Zhongjian Nanfang Testing Co., Ltd. is accredited to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration laboratories for the competence of testing. The Registration No. is CNAS L6048.  A2LA - Registration No.: 4346.01 This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. The test scope can be found as below link: https://portal.a2la.org/scopepdf/4346-01.pdf 5.7 Laboratory Location Shenzhen Zhongjian Nanfang Testing Co., Ltd. Address: No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Email: info@ccis-cb.com, Website: http://www.ccis-cb.com Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1805123 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 6 of 40

Report No: CCISE180512301 5.8 Test Instruments list Radiated Emission: Inventory Cal. Date Cal. Due date Item Test Equipment Manufacturer Model No. No. (mm-dd-yy) (mm-dd-yy) 1 3m SAC SAEMC 9(L)*6(W)* 6(H) CCIS0001 08-23-2014 08-22-2020 2 BiConiLog Antenna SCHWARZBECK VULB9163 CCIS0005 02-25-2018 02-24-2019 3 Horn Antenna SCHWARZBECK BBHA9120D CCIS0006 02-25-2018 02-24-2019 Pre-amplifier 4 HP 8447D CCIS0003 02-25-2018 02-24-2019 (10kHz-1.3GHz) Pre-amplifier Compliance Direction 5 PAP-1G18 CCIS0011 02-25-2018 02-24-2019 (1GHz-18GHz) Systems Inc. Pre-amplifier AFS33-18002 6 Rohde & Schwarz GTS218 02-25-2018 02-24-2019 (18-26GHz) 650-30-8P-44 7 Horn Antenna ETS-LINDGREN 3160 GTS217 02-25-2018 02-24-2019 Spectrum analyzer 8 Rohde & Schwarz FSP30 CCIS0023 02-25-2018 02-24-2019 9k-30GHz 9 EMI Test Receiver Rohde & Schwarz ESRP7 CCIS0167 02-25-2018 02-24-2019 10 Loop antenna Laplace instrument RF300 EMC0701 02-25-2018 02-24-2019 11 EMI Test Software AUDIX E3 N/A N/A N/A Conducted Emission: Cal.Date Cal.Due date Item Test Equipment Manufacturer Model No. Inventory No. (mm-dd-yy) (mm-dd-yy) 1 Shielding Room ZhongShuo Electron 11.0(L)x4.0(W)x3.0(H) CCIS0061 07-22-2017 07-21-2020 2 EMI Test Receiver Rohde & Schwarz ESCI CCIS0002 02-25-2018 02-24-2019 3 LISN CHASE MN2050D CCIS0074 02-25-2018 02-24-2019 4 LISN Rohde & Schwarz ESH3-Z5 8438621/010 02-25-2018 02-24-2019 5 Coaxial Cable CCIS N/A CCIS0086 02-25-2018 02-24-2019 6 EMI Test Software AUDIX E3 N/A N/A N/A 7 Power Sensor D.A.R.E RPR3006W 17I00015SNO27 11-10-2017 11-09- 2018 8 Power Sensor D.A.R.E RPR3006W 17I00015SNO28 11-10-2017 11-09- 2018 Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1805123 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 7 of 40

Report No: CCISE180512301 6 Test results andMeasurement Data 6.1 Antenna requirement: Standard requirement: FCC Part15 C Section 15.203 /247(c) 15.203 requirement: An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator, the manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. E.U.T Antenna: The antenna is an coil antenna which cannot replace by end-user, the best case gain of the antenna is - 1.25 dBi. Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1805123 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 8 of 40

Report No: CCISE180512301 6.2 Conducted Output Power Test Requirement: FCC Part15 C Section 15.247 (b)(3) Test Method: ANSI C63.10:2013 and KDB 558074(latest version) Limit: 30dBm Test setup: Test procedure: 1. Use a fast power sensor suitable for 2,4 GHz and capable of 1 MS/s. 2. Connect the power sensor to the transmit port, sample the transmit signal and store the raw data, every channel 25 bursts. Use these stored samples in all following steps. 3. Find the start and stop times of each burst in the stored measurement samples. 4. Between the start and stop times of each individual burst calculate the RMS power over the burst. Save these Pburst values, as well as the start and stop times for each burst. 5. The highest of all Pburst values (value "A" in dBm) will be used for maximum e.i.r.p. calculations. Add the (stated) antenna assembly gain "G" in dBi of the individual antenna. The RF Output Power (P) shall be calculated using the formula below: P = A + G Test Instruments: Refer to section 5.8 for details Test mode: Refer to section 5.3 for details Test results: Passed Measurement Data: Maximum Conducted Output Power Test Frequency Limit(dBm) Result (dBm) 916.3 MHz 17.53 30.00 Pass Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1805123 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 9 of 40

Report No: CCISE180512301 6.3 Occupy Bandwidth Test Requirement: FCC Part15 C Section 15.247 (a)(2) Test Method: ANSI C63.10:2013 and KDB 558074(latest version) Limit: >500kHz Test setup: Test Instruments: Refer to section 5.8 for details Test mode: Refer to section 5.3 for details Test results: Passed Measurement Data: 6dB Emission Bandwidth Test Frequency Limit(kHz) Result (MHz) 916.3 MHz 0.764 >500 Pass 99% Occupy Bandwidth Test Frequency Limit(kHz) Result (MHz) 916.3 MHz 0.796 N/A N/A Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1805123 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 10 of 40

CCIS Report No: CCISE180512301 Test plot as follows: oersa i (ri o is as ree 26.5 den care 761.000000000 kuz markadi omm Center #16.3 nne span 2 nuz Date: 7.JUN.2018 17:42:34 marker i (rid 17.a0 aan ree 26.5 den care #16.056000000 imz Gewree[ cosscobes s| is eeso00bee rel > ses000he0 Center #16.3 nne span 2 nuz Date: 7.JUN.2018 17:44:09 Shenzhen ZhongjianNantang Testing Co., Ltd. Project No.:CCISE1805123 No.B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 11 of 40

Report No: CCISE180512301 6.4 Power Spectral Density Test Requirement: FCC Part15 C Section 15.247 (e) Test Method: ANSI C63.10:2013 and KDB 558074(latest version) Limit: 8dBm Test setup: Test Instruments: Refer to section 5.8 for details Test mode: Refer to section 5.3 for details Test results: Passed Measurement Data: Test Frequency Power Spectral Density (dBm) Limit(dBm) Result 916.3 MHz -55.96 8.00 Pass Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1805123 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 12 of 40

CCIS Report No: CCISE180512301 Test plots as follow: @ «hew 2 kie marker i iri a «vaw 10 kiz —ss.96 can ree 26.5 den «ats 2o ae sur 225 ne #16.332000000 mmz Center #16—3 nne 200 kn=, span 2 nuz Date: 7.JUN.2018 17:36:15 Shenzhen ZhongjianNantang Testing Co., Ltd. Project No.:CCISE1805123 No.B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 13 of 40

Report No: CCISE180512301 6.5 Band Edge 6.5.1 Conducted Emission Method Test Requirement: FCC Part15 C Section 15.247 (d) Test Method: ANSI C63.10:2013 and KDB 558074(latest version) Limit: In any 100 kHz bandwidth outside the frequency band in which the spreadspectrum intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement. Test setup: Test Instruments: Refer to section 5.8 for details Test mode: Refer to section 5.3 for details Test results: Passed Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1805123 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 14 of 40

CCIS Report No: CCISE180512301 Test plots as follow: @ «haw 100 knz marker 2 (ri o «vaw 200 kn —i2.10 can ree 26.5 den «ats 2o ae sur s me e28.060000000 imz marke][1 im ere cenver sre.2 nu— < miey span «o nuz Date: 7.JUN.2018 17:46:36 Shenzhen ZhongjianNantang Testing Co., Ltd. Project No.:CCISE1805123 No.B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 15 of 40

Report No: CCISE180512301 6.5.2 Radiated Emission Method Test Requirement: FCC Part15 C Section 15.209 and 15.205 Test Method: ANSI C63.10: 2013 and KDB 558074(latest version) Test Frequency Range: 960MHz to 1.240GHz Test site: Measurement Distance: 3m Receiver setup: Frequency Detector RBW VBW Remark 960MHz-1GHz Quasi-peak 120kHz 300kHz Quasi-peak Value Peak 1MHz 3MHz Peak Value Above 1GHz RMS 1MHz 3MHz Average Value Limit: Frequency Limit (dBuV/m @3m) Remark 960MHz-1GHz 54.00 Quasi-peak Value 54.00 Average Value Above 1GHz 74.00 Peak Value Test Procedure: 1. The EUT was placed on the top of a rotating table 0.8m(below 1GHz) /1.5m(above 1GHz) above the groundat a 3 meter chamber.The table was rotated 360 degrees todetermine the position of the highest radiation. 2. The EUT was set 3 meters away from the interference-receiving antenna, whichwas mounted on the top of a variable-height antenna tower. 3. The antenna height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. 4. For each suspected emission, the EUT was arranged to its worst case and thenthe antenna was tuned to heights from 1 meter to 4 meters and the rotatablewas turned from 0 degrees to 360 degrees to find the maximum reading. 5. The test-receiver system was set to Peak Detect Function and SpecifiedBandwidth with Maximum Hold Mode. 6. If the emission level of the EUT in peak mode was 10dB lower than the limitspecified, then testing could be stopped and the peak values of the EUT wouldbe reported. Otherwise the emissions that did not have 10dB margin would bere-tested one by one using peak, quasi-peak or average method as specified andthen reported in a data sheet. Test setup: Below 1GHz Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1805123 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 16 of 40

Report No: CCISE180512301 Above 1GHz Test Instruments: Refer to section 5.8 for details Test mode: Refer to section 5.3 for details Test results: Passed Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1805123 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 17 of 40

Report No: CCISE180512301 Below 1GHz Horizontal: Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1805123 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 18 of 40

Report No: CCISE180512301 Test channel: Lowest Vertical: Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1805123 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 19 of 40

Report No: CCISE180512301 Above 1GHz Horizontal: Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1805123 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 20 of 40

Report No: CCISE180512301 Test channel: Highest Vertical: Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1805123 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 21 of 40

Report No: CCISE180512301 6.6 Spurious Emission 6.6.1 Conducted Emission Method Test Requirement: FCC Part15 C Section 15.247 (d) Test Method: ANSI C63.10:2013 and KDB 558074(latest version) Limit: In any 100 kHz bandwidth outside the frequency band in which the spreadspectrum intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement. Test setup: Test Instruments: Refer to section 5.8 for details Test mode: Refer to section 5.3 for details Test results: Passed Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1805123 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 22 of 40

CCIS Report No: CCISE180512301 Test plot as follows: @ «maw 100 knz mavker i) (ri o «vam 200 kn ~40.30 dam ree 26.5 den «ats 2o ae sur ie s.818800000. onz — seare 20 mz e07 muz, stop 10 on— Date: 7.JUN.2018 17:50:35 30MHz~10GHz Shenzhen ZhongjianNantang Testing Co., Ltd. Project No.:CCISE1805123 No.B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 23 of 40

Report No: CCISE180512301 6.6.2 Radiated Emission Method Test Requirement: FCC Part15 C Section 15.209 and 15.205 Test Method: ANSI C63.10:2013 Test Frequency Range: 9KHz to 25GHz Test site: Measurement Distance: 3m Receiver setup: Frequency Detector RBW VBW Remark 30MHz-1GHz Quasi-peak 120KHz 300KHz Quasi-peak Value Peak 1MHz 3MHz Peak Value Above 1GHz RMS 1MHz 3MHz Average Value Limit: Frequency Limit (dBuV/m @3m) Remark 30MHz-88MHz 40.0 Quasi-peak Value 88MHz-216MHz 43.5 Quasi-peak Value 216MHz-960MHz 46.0 Quasi-peak Value 960MHz-1GHz 54.0 Quasi-peak Value 54.0 Average Value Above 1GHz 74.0 Peak Value Test Procedure: 1. The EUT was placed on the top of a rotating table 0.8m(below 1GHz)/1.5m(above 1GHz) above the groundat a 3 meter chamber.The table was rotated 360 degrees todetermine the position of the highest radiation. 2. The EUT was set 3 meters away from the interference-receiving antenna, whichwas mounted on the top of a variable-height antenna tower. 3. The antenna height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. 4. For each suspected emission, the EUT was arranged to its worst case and thenthe antenna was tuned to heights from 1 meter to 4 meters and the rotatablewas turned from 0 degrees to 360 degrees to find the maximum reading. 5. The test-receiver system was set to Peak Detect Function and SpecifiedBandwidth with Maximum Hold Mode. 6. If the emission level of the EUT in peak mode was 10dB lower than the limitspecified, then testing could be stopped and the peak values of the EUT wouldbe reported. Otherwise the emissions that did not have 10dB margin would bere-tested one by one using peak, quasi- peak or average method as specified andthen reported in a data sheet. Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1805123 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 24 of 40

Report No: CCISE180512301 Test setup: Below 1GHz Above 1GHz Test Instruments: Refer to section 5.8 for details Test mode: Refer to section 5.3 for details Test results: Passed Remark: 1. Pre-scan all kind of the place mode (X-axis, Y-axis, Z-axis), and found the Y-axis is the worst case. 2. 9 kHz to 30MHz is too low, so only shows the data of above 30MHz in this report. Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1805123 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 25 of 40

Report No: CCISE180512301 Below 1GHz Horizontal: Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1805123 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 26 of 40

Report No: CCISE180512301 Vertical: Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1805123 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 27 of 40

Report No: CCISE180512301 Above 1GHz Peak value Aux Read Antenna Cable Factor(d Preamp Level Over Frequency Limit Line Level Factor Loss B) Factor (dBuV/ Limit Polarization (MHz) (dBuV/m) (dBuV) (dB/m) (dB) (dB) m) (dB) 1832.60 45.93 26.07 4.17 2.42 41.31 37.28 74.00 -36.72 Vertical 2748.90 46.24 28.12 5.08 2.88 41.72 40.60 74.00 -33.40 Vertical 3665.20 46.55 29.38 5.96 2.97 41.63 43.23 74.00 -30.77 Vertical 4581.50 46.51 31.23 6.87 3.57 42.12 46.06 74.00 -27.94 Vertical 5497.80 45.64 32.31 7.13 3.92 41.86 47.14 74.00 -26.86 Vertical 1832.60 47.14 26.07 4.17 2.42 41.31 38.49 74.00 -35.51 Horizontal 2748.90 45.98 28.12 5.08 2.88 41.72 40.34 74.00 -33.66 Horizontal 3665.20 46.13 29.38 5.96 2.97 41.63 42.81 74.00 -31.19 Horizontal 4581.50 46.92 31.23 6.87 3.57 42.12 46.47 74.00 -27.53 Horizontal 5497.80 45.90 32.31 7.13 3.92 41.86 47.40 74.00 -26.60 Horizontal Average value Aux Read Antenna Cable Factor(d Preamp Level Over Frequency Limit Line Level Factor Loss B) Factor (dBuV/ Limit Polarization (MHz) (dBuV/m) (dBuV) (dB/m) (dB) (dB) m) (dB) 1832.60 36.23 26.07 4.17 2.42 41.31 27.64 54.00 -26.36 Vertical 2748.90 37.45 28.12 5.08 2.88 41.72 31.79 54.00 -22.21 Vertical 3665.20 37.89 29.38 5.96 2.97 41.63 34.62 54.00 -19.38 Vertical 4581.50 37.78 31.23 6.87 3.57 42.12 37.37 54.00 -16.63 Vertical 5497.80 36.26 32.31 7.13 3.92 41.86 37.77 54.00 -16.23 Vertical 1832.60 37.86 26.07 4.17 2.42 41.31 29.31 54.00 -24.69 Horizontal 2748.90 36.24 28.12 5.08 2.88 41.72 30.58 54.00 -23.42 Horizontal 3665.20 36.95 29.38 5.96 2.97 41.63 33.68 54.00 -20.32 Horizontal 4581.50 37.54 31.23 6.87 3.57 42.12 37.13 54.00 -16.87 Horizontal 5497.80 36.57 32.31 7.13 3.92 41.86 38.08 54.00 -15.92 Horizontal Remark: 1. Final Level =Receiver Read level + Antenna Factor + Cable Loss – Preamplifier Factor. 2. The emission levels of other frequencies are very lower than the limit and not show in test report. Shenzhen ZhongjianNanfang Testing Co., Ltd. Project No.:CCISE1805123 No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong,China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 28 of 40


Document Created: 2018-07-12 14:30:11
Document Modified: 2018-07-12 14:30:11
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC