Limited Modular Approval Letter

FCC ID: TA8AKRC161746-1

Cover Letter(s)

Download: PDF
FCCID_4443658

1 (2) Prepared (also subject responsible if other) No. EHUAYAN TA8AKRC161746-1 Approved Checked Date Rev Reference Hua Yang 2019-08-27 A Federal Communications Commission Authorization & Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Attention: Equipment Authorization Branch August 27, 2019 Subject: Request for Limited Single-Modular Transmitter certification We, Ericsson AB, request permission to use Limited Single-Modular Transmitter certification. Legend: C = Compliant in full NC = Not Compliant in full, explanation given as comments below the chapter

2 (2) Prepared (also subject responsible if other) No. EHUAYAN TA8AKRC161746-1 Approved Checked Date Rev Reference Hua Yang 2019-08-27 A 1 FCC ID: TA8AKRC161746-1 Extract from KDB 996369 D01 Module Equip Auth Guide v02 A single-modular transmitter is a self-contained, physically delineated, component for which compliance can be demonstrated independent of the host operating conditions, and which complies with all eight requirements of § 15.212(a)(1) as summarized below. See §15.212 for more detailed information, and §2.901, et seq., for general certification requirements. 1) C The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly; 2) C The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal; 3) NC The module must contain power supply regulation on the module; 4) NC The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per §§15.203, 15.204(b), 15.20 4(c), 15.212(a), 2.929(b); 5) C The module must demonstrate compliance in a stand-alone configuration; 6) C The module must be labeled with its permanently affixed FCC ID label, or use an electronic display (see KDB Publication 784748); 7) C The module must comply with all specific rules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee; 8) NC The module must comply with RF exposure requirements (see Clause V below). Explanation for items marked as NC = Not Compliant in full Ericsson Approved and Supplied PSU compatible with Radio 4408 is required for use in all installations with the listed module. Ericsson approved antennas, compatible with Radio 4408, listed in user manual document Radio Description are covered by compliance testing against 47 CFR 1.1310 and 2.1091 for this module. Use of other antennas requires that the RF Exposure compliance is addressed at the time of Licensing according to national/regional regulations. If additional information is needed, please contact me on the below listed number. Hua Yang Staff Engineer, Regulatory Programs Ericsson AB FCC Registration Number (FRN): 0013476155 Isafjordsgatan 10 Kista, SE-164 80 Stockholm Sweden Telephone No.: +86 10 8476 7133 e-mail: hua.yang@ericsson.com


Document Created: 2019-09-03 11:34:11
Document Modified: 2019-09-03 11:34:11
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC