C2PC Request

FCC ID: TA8AKRC161636

Cover Letter(s)

Download: PDF
FCCID_3859876

EXHIBIT 13 1 (2) Prepared (also subject responsible if other) No. ERAWALA Approved Checked Date Rev Reference BNEPBAJD 2018-03-22 B Federal Communications Commission Authorization & Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Attention: Equipment Authorization Branch Subject: Class II Permissive Change for FCC ID: TA8AKRC161636 To Whom It May Concern: Ericsson AB requests a Class II Permissive Change for the above FCC Identifier. Changes have been made in hardware and software, as described/covered in exhibit 12 and supporting documentation. The main reason for this permissive change is the introduction of NB-IoT SA (Narrow Band-Internet of Things Stand Alone) via SW. The radio operates in the Cellular band as per 47 CFR Part 24. This radio (Radio 4415 B2 B25) is designed for use in GSM, WCDMA and LTE cellular telephone system. This FDD radio operates in Band 2 and in Band 25. The Transmitter part of this RRU operates with GSM, WCDMA, LTE, NB-IoT in frequency band 2: 1930 - 1990 MHz and with WCDMA, LTE, NB-IoT in frequency band 25:1930 - 1995 MHz. The Receiver part of this RRU operates with GSM, WCDMA, LTE, NB-IoT in frequency band 2: 1850 - 1910 MHz and with WCDMA, LTE, NB-IoT in frequency band 25: 1850 - 1915. It supports channel bandwidths of 200 kHz for GSM, 4.2 - 5 MHz for WCDMA, 1.4, 3, 5, 10, 15, 20 MHz for LTE and 180 kHz for NB-IoT SA. The radio supports modulation type GMSK, AQPSK and 8PSK for GSM, QPSK, 16 QAM and 64 QAM for WCDMA, QPSK, 16QAM, 64QAM and 256 QAM for LTE and QPSK for NB-IoT. The radio supports spectrum consisting of two or more sub-blocks separated by sub-block gap(s), NCS (None- Contiguous Spectrum). The radio unit supports carrier aggregation. The radio has the ability to be used in a RBS system configured for 3GPP dual TX and Quad RX technologies for GSM. The radio has the ability to be used in a RBS system configured for 3GPP up to 2x2 MIMO/Spatial multiplexing and beam-forming technologies for WCDMA. The radio has the ability to be used in a RBS system configured for 3GPP up to 4x4 MIMO/Spatial multiplexing and beam-forming technologies for LTE. The radio supports LTE NB-IoT inband and NB-IoT standalone functionality. The radio will in normal mode operate at a maximum power of 40 W per port at the output connectors. The radio has 4 Tx ports.


Document Created: 2019-09-27 20:12:37
Document Modified: 2019-09-27 20:12:37
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC