Test Report I pt I

FCC ID: TA8AKRC161592

Test Report

Download: PDF
FCCID_4013974

Report On FCC Testing of the Ericsson Remote Radio Unit LTE KRC 161 592/1 and KRC 161 592/2, Radio 2217 B26D (869-880 MHz), in a Base Station configuration in accordance with FCC CFR 47 Part 2 and FCC CFR 47 Part 22 COMMERCIAL-IN-CONFIDENCE FCC ID: TA8AKRC161592 PREPARED BY APPROVED BY DATED 13 September 2018 Maggie Whiting Steve Scarfe Key Account Manager Authorised Signatory Document 75939974 Report 01 Issue 2 September 2018

CONTENTS Section Page No 1 REPORT INFORMATION ............................................................................................................ 2 1.1 Report Details ................................................................................................................................ 3 1.2 Brief Summary of Results .............................................................................................................. 4 1.3 Configuration Description .............................................................................................................. 5 1.4 Declaration of Build Status ............................................................................................................ 6 1.5 Product Information ....................................................................................................................... 7 1.6 Test Setup ..................................................................................................................................... 8 1.7 Test Conditions ............................................................................................................................ 10 1.8 Deviation From The Standard ..................................................................................................... 10 1.9 Modification Record ..................................................................................................................... 10 1.10 Alternative Test Site..................................................................................................................... 10 2 TEST DETAILS .......................................................................................................................... 11 2.1 Maximum Peak Output Power and Peak to Average Ratio - Conducted .................................... 12 2.2 Occupied Bandwidth .................................................................................................................... 23 2.3 Band Edge ................................................................................................................................... 35 2.1 Radiated Spurious Emissions ...................................................................................................... 57 2.2 Transmitter Spurious Emissions .................................................................................................. 62 2.3 Frequency Stability ...................................................................................................................... 79 3 TEST EQUIPMENT USED ......................................................................................................... 81 3.1 Test Equipment Used .................................................................................................................. 82 3.2 Measurement Uncertainty............................................................................................................ 85 4 ACCREDITATION, DISCLAIMERS AND COPYRIGHT............................................................ 86 4.1 Accreditation, Disclaimers and Copyright .................................................................................... 87 ANNEX A Module Lists..............................................................................................................................A.2 Document 75939974 Report 01 Issue 2 Page 1 of 87

SECTION 1 REPORT INFORMATION Document 75939974 Report 01 Issue 2 Page 2 of 87

1.1 REPORT DETAILS The information contained in this report is intended to show verification of the Ericsson Radio 2217 B26D KRC 161 592/1 and KRC 161 592/2 to the requirements of FCC CFR 47 Part 22. Testing was carried out in support of an application for Grant of Radio 2217 B26D KRC 161 592/1 and KRC 161 592/2 in LTE mode. Manufacturer Ericsson AB Address Isafjordsgatan 10 SE-164 80 Stockholm 16480 Sweden Product Name Radio 2217 B26D Product Number KRC 161 592/1 Serial Number(s) SD825975510 Software Version CXP 901 7316/2 R67GK Hardware Version R1E Non-Test Variant KRC 161 592/2 Test Specification/Issue/Date FCC CFR 47 Part 2: 2016 FCC CFR 47 Part 22: 2016 Start of Test 06 September 2017 Finish of Test 27 September 2017 Name of Engineer(s) Mohamed Toubella Jack Tuckwell Related Document(s) KDB 971168 D01 v02r02 KDB 662911 D01 v02r01 This report has been up issued to Issue 2 and should be read in place of Issue 1. This report has been up issued to Issue 2 to correct the Maximum rated output power Statement in Section 1.4, The Declaration of Build Status. Document 75939974 Report 01 Issue 2 Page 3 of 87

1.2 BRIEF SUMMARY OF RESULTS A brief summary of results for each configuration, in accordance with FCC CFR 47 Part 2 and , FCC CFR 47 Part 22 is shown below. Specification Clause Section FCC CFR 47 FCC CFR 47 Part Test Description Result Part 2 22 Maximum Peak Output Power and Peak to Average Ratio - 2.1 2.1046 22.913 (a) Pass Conducted - - 22.913 (a) Effective Radiated Power (ERP) N/A1 2.2 2.1049 22.917 (b) Occupied Bandwidth Pass 2.3 2.1051 22.917 Band Edge Pass 2.4 2.1053 22.917 Radiated Spurious Emissions Pass 2.5 2.1051 22.917 Transmitter Spurious Emissions Pass 2.6 2.1055 22.355 Frequency Stability Pass - - 15.111 Receiver Spurious Emissions N/A2 N/A1 – Not Applicable, due to no Integral Antenna. N/A2 – Not Applicable, as this is a transceiver. Document 75939974 Report 01 Issue 2 Page 4 of 87

1.3 CONFIGURATION DESCRIPTION Test Configuration Code Carrier(s) Configuration Description Configuration Config A L-MIMO-SC 1C LTE MIMO, Single Carrier Config B L-MIMO-MC 2C LTE MIMO, Multi Carrier x2 Config C L-MIMO-MC1 3C LTE MIMO, Multi Carrier x3 The Radio 2217 B26D KRC 161 592/1 and KRC 161 592/2 supports Test Models E-TM1.1, E- TM3.2 and E-TM3.1 at 800MHz defined in 3GPP TS 36.141. Test Model E-TM1.1 is used to represent QPSK modulation only, and Test Model E-TM3.2 is used to represent 16QAM modulation, and Test Model E-TM3.1 is used to represent 64QAM modulation. The product also supports ETM3.1a for 256QAM. The settings below were deemed representative for all traffic scenarios when settings with different modulations, channel bandwidths, number for carriers and RF configurations has been tested to find the worst case setting. The setting below were used for all measurements if not otherwise noted: LTE: MIMO mode single carrier: E-TM1.1 MIMO mode multi carrier (x2): E-TM1.1 MIMO mode multi carrier (x3): E-TM1.1 The Maximum Output Power was tested on both TX/RX output connector RF A and RF B, all other TX measurements were performed on the combined TX/RX output connector RF A of the EUT as the representative ports. The complete testing was performed with the EUT transmiting at maximum RF power Unless otherwise stated. Document 75939974 Report 01 Issue 2 Page 5 of 87

1.4 DECLARATION OF BUILD STATUS Manufacturing Description Remote Radio Unit Manufacturer Ericsson AB Product Name Radio 2217 B26D KRC 161 592/1 Product Number KRC 161 592/2 RU Name Radio 2217 B26D RU Number KRC 161 592/1 KRC 161 592/2 DU Name NA DU Number NA Band Number B26D RAT LTE Number of carriers Maximum 3 carriers per port Base station class Wide Area Maximum rated output Maximum 46.0dBm (40W) per port for all modes except maximum 43.0dBm (20W) per power(s) carrier per port for LTE 1.4MHz Single Carrier Duplex Mode FDD Frequency Band B26D (800MHz) Modulation type(s) LTE: QPSK, 16QAM, 64QAM, 256QAM Channel Bandwidth(s) LTE: 1.4MHz, 3MHz, 5MHz, 10MHz, 15MHz Transmit diversity Each transmitter path is declared to be equivalent Receive diversity Each receiver path is declared to be equivalent MIMO Each transmitter path is declared to be equivalent Each receiver path is declared to be equivalent ITU designation or class LTE: 1M40F9W, 3M00F9W, 5M00F9W, 10M0F9W, 15M0F9W of emission Hardware Version R1E Software Version CXP 901 7316/2 R67GK FCC ID TA8AKRC161592 ISED Model Name Highest Internally 1030.1 MHz Generated Frequency Environment temperature Minimum Maximum range(s) −40 °C +55 °C AC Power source Voltage Range(s) Minimum VAC Nominal Maximum VAC VAC DC Power source Yes Voltage Range(s) Minimum VDC Nominal Maximum VDC VDC −36.0 −48 V −58.5 V Options Type Model Signature Date D of B S Serial No No responsibility will be accepted by TÜV SÜD Product Service UK Limited as to the accuracy of the information declared in this document by the manufacturer. Document 75939974 Report 01 Issue 2 Page 6 of 87

1.5 PRODUCT INFORMATION 1.5.1 Technical Description The Equipment Under Test (EUT) Radio 2217 B26D KRC 161 592/1 and KRC 161 592/2 is an Ericsson Remote Radio Unit working in the public mobile service 800MHz band which provides communication connections to 800MHz network. The Radio 2217 B26D KRC 161 592/1 and KRC 161 592/2 operates from a -48V DC supply. The Equipment Under Test (EUT) is shown in the photograph below. A full technical description can be found in the Manufacturer’s documentation. Equipment Under Test Document 75939974 Report 01 Issue 2 Page 7 of 87

1.6 TEST SETUP Block diagram of Radio 2217 B26D with cables and auxiliary equipment for Conducted measurements. Document 75939974 Report 01 Issue 2 Page 8 of 87

Block diagram of Radio 2217 B26D with cables and auxiliary equipment for Radiated measurements. Document 75939974 Report 01 Issue 2 Page 9 of 87

1.7 TEST CONDITIONS For all tests the EUT was set up in accordance with the relevant test standard and to represent typical operating conditions. Tests were applied with the EUT situated in a shielded enclosure, test laboratories or a chamber as appropriate. The EUT was powered from a -48V DC supply. FCC Measurement Facility Registration Number 90987 Octagon House, Fareham Test Laboratory 1.8 DEVIATION FROM THE STANDARD No deviations from the applicable test standards or test plan were made during testing. 1.9 MODIFICATION RECORD No modifications were made to the EUT during testing. 1.10 ALTERNATIVE TEST SITE Under our group UKAS Accreditation, TÜV SÜD Product Service conducted the following tests at Ericsson in Fareham, UK. Test Name Name of Engineer(s) Maximum Peak Output Power and Peak to Average Ratio - Conducted Mohamed Toubella Occupied Bandwidth Mohamed Toubella Band Edge Mohamed Toubella Radiated Spurious Emissions Jack Tuckwell Transmitter Spurious Emissions Mohamed Toubella Frequency Stability Mohamed Toubella Receiver Spurious Emissions Mohamed Toubella Document 75939974 Report 01 Issue 2 Page 10 of 87

SECTION 2 TEST DETAILS Document 75939974 Report 01 Issue 2 Page 11 of 87

2.1 MAXIMUM PEAK OUTPUT POWER AND PEAK TO AVERAGE RATIO - CONDUCTED 2.1.1 Specification Reference FCC CFR 47 Part 2, Clause 2.1046 FCC CFR 47 Part 22, Clause 22.913 (a) 2.1.2 Date of Test and Modification State 22 September 2017 - Modification State 0 2.1.3 Test Equipment Used The major items of test equipment used for the above tests are identified in Section 3.1. 2.1.4 Environmental Conditions Ambient Temperature 22.5C Relative Humidity 55.2% 2.1.5 Test Method All measurements were made in accordance with FCC KDB 971168 D01, clause 5.2.1 and summed in accordance with FCC KDB 662911 D01. Measurements were performed with a Spectrum Analyser using the Band Power measurement function. The detector was set to RMS with an RBW of at least 1 % of the carrier bandwidth and a VBW of at least 3 times the RBW. The integration bandwidth was configured to be wider than the total bandwidth of the carrier or combinations of carriers, (multi-carrier). Using a sweep time of auto, measurements were performed over 200 samples, with the average measurement recorded. Due to Average measurements being recorded, an additional Peak to Average measurement was made in all single carrier configurations. This was achieved using the CCDF function of the Spectrum Analyser with the RBW being set to a value wider than the largest signal being measured – in this case – 10 MHz. Document 75939974 Report 01 Issue 2 Page 12 of 87

2.1.6 Test Results Configuration A Maximum Output Power 46 dBm Peak to Average Ratio (PAR) / Output Power LTE Carrier Channel Position B Antenna LTE Modulation Bandwidth Average Power PAR (dB) dBm dBm/MHz A QPSK 1.4 MHz 8.28 43.07 42.63 A QPSK 3.0 MHz 7.09 45.97 42.21 A QPSK 5.0 MHz 7.08 45.97 40.00 B QPSK 5.0 MHz 7.10 46.00 39.99 Total - 49.00 43.01 A QPSK 10.0 MHz 7.14 45.99 37.38 Document 75939974 Report 01 Issue 2 Page 13 of 87

Antenna A - LTE Modulation QPSK - LTE Carrier Bandwidth 1.4 MHz - Channel Position B Antenna A - LTE Modulation QPSK - LTE Carrier Bandwidth 3.0 MHz - Channel Position B Document 75939974 Report 01 Issue 2 Page 14 of 87

Antenna A - LTE Modulation QPSK - LTE Carrier Bandwidth 5.0 MHz - Channel Position B Antenna B - LTE Modulation QPSK - LTE Carrier Bandwidth 5.0 MHz - Channel Position B Document 75939974 Report 01 Issue 2 Page 15 of 87

Antenna A - LTE Modulation QPSK - LTE Carrier Bandwidth 10.0 MHz - Channel Position B Configuration A Maximum Output Power 46 dBm Peak to Average Ratio (PAR) / Output Power LTE Carrier Channel Position M Antenna LTE Modulation Bandwidth Average Power PAR (dB) dBm dBm/MHz A QPSK 1.4 MHz 8.30 43.05 42.50 A QPSK 3.0 MHz 7.11 46.00 42.17 A QPSK 5.0 MHz 7.10 46.01 40.13 B QPSK 5.0 MHz 7.13 45.99 40.00 Total - 49.01 43.08 A QPSK 10.0 MHz 7.17 46.04 37.25 Document 75939974 Report 01 Issue 2 Page 16 of 87

Antenna A - LTE Modulation QPSK - LTE Carrier Bandwidth 1.4 MHz - Channel Position M Antenna A - LTE Modulation QPSK - LTE Carrier Bandwidth 3.0 MHz - Channel Position M Document 75939974 Report 01 Issue 2 Page 17 of 87

Antenna A - LTE Modulation QPSK - LTE Carrier Bandwidth 5.0 MHz - Channel Position M Antenna B - LTE Modulation QPSK - LTE Carrier Bandwidth 5.0 MHz - Channel Position M Document 75939974 Report 01 Issue 2 Page 18 of 87

Antenna A - LTE Modulation QPSK - LTE Carrier Bandwidth 10.0 MHz - Channel Position M Configuration A Maximum Output Power 46 dBm Peak to Average Ratio (PAR) / Output Power LTE Carrier Channel Position T Antenna LTE Modulation Bandwidth Average Power PAR (dB) dBm dBm/MHz A QPSK 1.4 MHz 8.31 43.15 42.59 A QPSK 3.0 MHz 7.12 46.06 42.20 A QPSK 5.0 MHz 7.15 46.03 40.01 B QPSK 5.0 MHz 7.17 45.99 40.02 Total - 49.02 43.03 A QPSK 10.0 MHz 7.20 46.04 37.57 Document 75939974 Report 01 Issue 2 Page 19 of 87

Antenna A - LTE Modulation QPSK - LTE Carrier Bandwidth 1.4 MHz - Channel Position T Antenna A - LTE Modulation QPSK - LTE Carrier Bandwidth 3.0 MHz - Channel Position T Document 75939974 Report 01 Issue 2 Page 20 of 87

Antenna A - LTE Modulation QPSK - LTE Carrier Bandwidth 5.0 MHz - Channel Position T Antenna B - LTE Modulation QPSK - LTE Carrier Bandwidth 5.0 MHz - Channel Position T Document 75939974 Report 01 Issue 2 Page 21 of 87

Antenna A - LTE Modulation QPSK - LTE Carrier Bandwidth 10.0 MHz - Channel Position T Configuration B Maximum Output Power 46 dBm Peak to Average Ratio (PAR) / Output Power LTE Carrier Channel Position M Antenna LTE Modulation Bandwidth Average Power PAR (dB) dBm dBm/MHz A QPSK 1.4 MHz - 45.96 42.18 A QPSK 3.0 MHz - 45.99 39.34 A QPSK 5.0 MHz - 46.00 37.20 Configuration C Maximum Output Power 46 dBm Peak to Average Ratio (PAR) / Output Power LTE Carrier Channel Position M Antenna LTE Modulation Bandwidth Average Power PAR (dB) dBm dBm/MHz A QPSK 1.4 MHz - 45.96 40.61 A QPSK 3.0 MHz - 45.99 37.57 Limit Peak Power ≤500 W or ≤+57 dBm Peak to Average Ratio 13 dB Document 75939974 Report 01 Issue 2 Page 22 of 87

2.2 OCCUPIED BANDWIDTH 2.2.1 Specification Reference FCC CFR 47 Part 2, Clause 2.1049 FCC CFR 47 Part 22, Clause 22.917 (b) 2.2.2 Date of Test and Modification State 22 September 2017 - Modification State 0 2.2.3 Test Equipment Used The major items of test equipment used for the above tests are identified in Section 3.1. 2.2.4 Environmental Conditions Ambient Temperature 22.5C Relative Humidity 55.2% 2.2.5 Test Method All measurements were made in accordance with FCC KDB 971168 D01 Clause 4.1. The Spectrum Analyser RBW was configured to be at least 1% of the channel bandwidth of the carrier to be measured. For 26dB Bandwidth, in accordance with KDB 971168 D01, a peak detector and a trace setting of Max Hold were used. The trace was allowed to stabilise. Using the Spectrum Analyser function, the 26 dB measurement result was obtained. 2.2.6 Test Results Configuration A Maximum Output Power 46 dBm Result (kHz) LTE LTE Carrier Channel Position B Channel Position M Channel Position T Antenna Modulation Bandwidth Occupied -26 dB Occupied -26 dB Occupied -26 dB Bandwidth Bandwidth Bandwidth Bandwidth Bandwidth Bandwidth A QPSK 1.4 MHz 1,097.61 1,269.85 1,096.72 1,266.66 1,096.17 1,266.89 A QPSK 3.0 MHz 2,694.23 2,894.58 2,699.31 2,895.16 2,694.25 2,900.19 A QPSK 5.0 MHz 4,485.23 4,817.72 4,480.38 4,781.25 4,478.45 4,776.42 B QPSK 5.0 MHz 4,482.21 4,798.16 4,481.27 4,806.77 4,479.35 4,794.28 A QPSK 10.0 MHz 8,941.10 9,599.04 8,957.77 9,572.16 8,935.83 9,646.72 Document 75939974 Report 01 Issue 2 Page 23 of 87

Antenna A - LTE Modulation QPSK - LTE Carrier Bandwidth 1.4 MHz - Channel Position B Antenna A - LTE Modulation QPSK - LTE Carrier Bandwidth 1.4 MHz - Channel Position M Document 75939974 Report 01 Issue 2 Page 24 of 87

Antenna A - LTE Modulation QPSK - LTE Carrier Bandwidth 1.4 MHz - Channel Position T Antenna A - LTE Modulation QPSK - LTE Carrier Bandwidth 3.0 MHz - Channel Position B Document 75939974 Report 01 Issue 2 Page 25 of 87

Antenna A - LTE Modulation QPSK - LTE Carrier Bandwidth 3.0 MHz - Channel Position M Antenna A - LTE Modulation QPSK - LTE Carrier Bandwidth 3.0 MHz - Channel Position T Document 75939974 Report 01 Issue 2 Page 26 of 87

Antenna A - LTE Modulation QPSK - LTE Carrier Bandwidth 5.0 MHz - Channel Position B Antenna B - LTE Modulation QPSK - LTE Carrier Bandwidth 5.0 MHz - Channel Position B Document 75939974 Report 01 Issue 2 Page 27 of 87


Document Created: 2019-03-30 22:33:49
Document Modified: 2019-03-30 22:33:49
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC