Test Report 6

FCC ID: TA8AKRC161472-3

Test Report

Download: PDF
FCCID_3958963

No.I18Z61058-WMD02 Page133of233 Port C, Channel Position B, LTE 10.0MHz ©Copyright. All rights reserved by CTTL.

No.I18Z61058-WMD02 Page134of233 Port C, Channel Position B, LTE 15.0MHz Port C, Channel Position B, LTE 20.0MHz ©Copyright. All rights reserved by CTTL.

No.I18Z61058-WMD02 Page135of233 Configuration NB-IoT+WCDMA+LTE-MIMO-MC-1-BE, (1GB QPSK +1WCDMA 16QAM +1LTE QPSK) RBW Limit Band Edge Frequency Channel Bandwidth (KHz) (dBm) Channel Position B (GB) 10MHz, (W) 5MHZ 51 -19.02 2110.0MHz (L) 5.0MHz Port C, Channel Position B ©Copyright. All rights reserved by CTTL.

No.I18Z61058-WMD02 Page136of233 Configuration NB-IoT+WCDMA+LTE-MIMO-MC-2-BE, (1GB QPSK +2WCDMA 16QAM +1LTE QPSK) RBW Limit Band Edge Frequency Channel Bandwidth (KHz) (dBm) Channel Position B (GB) 10MHz, (W) 5MHZ 51 -19.02 2110.0MHz (L) 5.0MHz Port C, Channel Position B ©Copyright. All rights reserved by CTTL.

No.I18Z61058-WMD02 Page137of233 ©Copyright. All rights reserved by CTTL.

No.I18Z61058-WMD02 Page138of233 A.4 Conducted Spurious Emission A.4.1 Reference FCC CFR 47 Part 27, Clause 27.53(h) A.4.2 Method of measurement In accordance with FCC rules, the power of any emission outside of the authorized operating frequency ranges must be attenuated below the transmitting power (P) by a factor of at least 43 + 10 log(P) dB. The spurious emissions from the antenna terminal were measured. The transmitter output power was attenuated using an attenuator and the frequency spectrum investigated from 3KHz to 22GHz. The resolution bandwidth of 1MHz was employed for frequency band 3KHz to 22GHz. The spectrum analyzer detector was set to RMS. For MIMO mode configurations, the limit was adjusted with a correction of -6.02dB [10Log4] by using the Measure and Add 10Log(N) dB technique according to FCC KDB 662911 D01 accounting for simultaneous transmission from all antenna ports. Then the limit was adjusted to -19.02dBm. For NB-IoT-StandAlone configurations, EUT can transmit in Tx diversity mode(TM2). The limit was adjusted with a correction of -3.01dB [10Log2] A.4.3 Measurement limit The power of any emission outside of the authorized operating frequency ranges must be attenuated below the transmitting power (P) by a factor of at least 43 + 10log(P) dB. A.4.4 Measurement results Configuration LTE-MIMO-1C QPSK RBW Limit Channel Bandwidth (MHz) (dBm) 5.0 MHz 1.0 -19.02 10.0 MHz 1.0 -19.02 15.0 MHz 1.0 -19.02 20.0 MHz 1.0 -19.02 ©Copyright. All rights reserved by CTTL.

No.I18Z61058-WMD02 Page139of233 Port B, Channel Position B 5.0 MHz ©Copyright. All rights reserved by CTTL.

No.I18Z61058-WMD02 Page140of233 Port B, Channel Position M 5.0 MHz ©Copyright. All rights reserved by CTTL.

No.I18Z61058-WMD02 Page141of233 Port B, Channel Position T 5.0 MHz ©Copyright. All rights reserved by CTTL.

No.I18Z61058-WMD02 Page142of233 Port B, Channel Position B 10.0 MHz ©Copyright. All rights reserved by CTTL.

No.I18Z61058-WMD02 Page143of233 Port B, Channel Position M 10.0 MHz ©Copyright. All rights reserved by CTTL.

No.I18Z61058-WMD02 Page144of233 Port B, Channel Position T 10.0 MHz ©Copyright. All rights reserved by CTTL.

No.I18Z61058-WMD02 Page145of233 Port B, Channel Position B 15.0 MHz ©Copyright. All rights reserved by CTTL.

No.I18Z61058-WMD02 Page146of233 Port B, Channel Position M 15.0 MHz ©Copyright. All rights reserved by CTTL.

No.I18Z61058-WMD02 Page147of233 Port B, Channel Position T 15.0 MHz ©Copyright. All rights reserved by CTTL.

No.I18Z61058-WMD02 Page148of233 Port B, Channel Position B 20.0 MHz ©Copyright. All rights reserved by CTTL.

No.I18Z61058-WMD02 Page149of233 Port B, Channel Position M 20.0 MHz ©Copyright. All rights reserved by CTTL.

No.I18Z61058-WMD02 Page150of233 Port B, Channel Position T 20.0 MHz ©Copyright. All rights reserved by CTTL.


Document Created: 2018-07-30 15:02:00
Document Modified: 2018-07-30 15:02:00
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC