Limited Modular Approval Justification

FCC ID: T8H-BESTPM104

Cover Letter(s)

Download: PDF
FCCID_4439377

dormakabar RE FCC ID: T8H—BESTPM104 To the certification reviewer: We are hereby applying for limited modular approval of the above—referenced FCC ID, based on compliance with most of the criteria as detailed below. Sincerely, obert Strong Compliance Manager Part 15 Unlicensed Single Modular Transmitter Approval Justification per 15.212 Requirement per 15.212 reference (i) The radio elements of the modular N/A: There is no shielding on the module transmitter must. have their own RF shielding. (ii) The modular transmitter must have buffered All modulation and data inputs are buffered directly modulation/data inputs (if such inputs are on the PIC16F88 transmitter IC provided. (iii) The modular transmitter must have its own Power supply regulation is provided by external on— power supply regulation. board circuitry over the input range —0.6V to 14V (iv) The modular transmitter must comply with The antenna employs a unique antenna connector the antenna and transmission system not accessible to the user. The application for this requirements of §§ 15.203, 15.204(b) and module is intended for professional installation 15.204(c). only. (v) The modular transmitter must be tested in a Testing was performed in a stand—alone stand—alone configuration, i.e., the module configuration as shown in the test setup photos must not be inside another device during testing for compliance with Part 15 parameters. (vi) The modular transmitter must be equipped A sample of the host label is provided as an exhibit, with either a permanently affixed label or showing the FCC identifier of the module. must be capable of electronically displaying its FCC identification number. If the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module.

dormakaba‘ (vin The modular transmitter must comply with The module complies fully with the operating any specific rules or operating requirements requirements of FCC Part 15.209 demonstrated in that ordinarily apply to a complete the test report exhibit. transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. (viin The modular transmitter must comply with This module operates under FCC Part 15.209 which any applicable RF exposure requirements in is exempt from RF exposure evaluation owing to the its final configuration. very low operating power:


Document Created: 2019-02-08 16:17:35
Document Modified: 2019-02-08 16:17:35
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC