User Manual

FCC ID: T2C-W80B

Users Manual

Download: PDF
FCCID_4263339

DECT IP Multi-Cell Base Station W80B Quick Start Guide(V83.10) www.yealink.com For W80B firmware 103.83.0.10 or later For W53H firmware 88.83.0.20 or later For W56H firmware 61.83.0.20 or later


Package Contents 2 + + 2 W80B Base Station Expansion Screws Quick Start Guide Power Adapter (Optional) Installation Packaging Contents 1. Connect the power and the network using method a or method b. a. AC Power Option b. PoE (Power over Ethernet) Option IEEE 802.3af compliant PoE Hub/Switch Note: If you choose method a, use Yealink supplied power adapter (5V/1.2A). A third-party power adapter may damage the base station. If you choose method b, you do not need to connect the power adapter. Make sure the hub/switch is PoE-compliant. 2. Mount W80B on the wall or on the ceiling. MAC MA C SN SN A 59m m 59m m B 59mm 30 mm MAC SN 25 mm Max:8mm Max:4.5mm (0.315”) (0.177”) Min:6.5mm (0.256”) Max:3mm (0.118”) Wall-Mount Installation 1

59mm 3 mm C Celling Installation Note: When attaching the base station, we recommend that you make the screws protrude by approximate 3 mm. Assigning a Device Role The W80B is shipped as a base station. Before registering a handset to the W80B, you need to switch the W80B to the DM-Base role. Then, the W80B can work as a DECT Manager and base station. Switching to the DM-Base Role Easy Switch： 1.Press on the W80B three times quickly in one second. Normal Switch： 1.Long press on the W80B for about 10 seconds till the three LED indicators slowly flash green. 2.Press three times briefly. The ROLE LED indicator glows orange, and the DECT and LAN LED indicators glow green. The device will reboot to make the change take effect. Note: When you change the base mode, the time interval between each button press should be less than 3 seconds. The device will return to the original mode after 30 seconds of inactivity. Base Mode Options The following shows the LED status after the W80B connects to the power and network: Base Mode Role DECT LED ROLE LED LAN LED Option 1 Base Off Green Green 2 DM Off Orange Green 3 DM-Base Green Orange Green 2

Registering the Handset Before registering, long press on the W80B till the DECT LED indicator flashes. You can only register one handset to the W80B using this method. If the W56H/W53H handset LCD screen prompts “Unregistered!”, there are two methods to register a new handset: Easy Registration: 1.Press the Reg soft key on the handset to register quickly. Normal Registration: 1.Press the OK soft key on the handset, and then select Register Handset. 2.Select the desired base station and then press the OK soft key. The handset begins searching the base station. 3.Press the OK soft key after searching a base station successfully. 4.Enter the base station PIN (default: 0000), and then press the Done soft key to complete registration. If the handset LCD screen does not prompt “Unregistered!”, press the OK key to enter the main menu, and select Settings->Registration->Register Handset to register the handset. Note: If the handset is registered to the base station successfully, the handset LCD screen prompts “Handset Subscribed”. Contact your system administrator for registering more handsets to the base station. The W80B must work with the W56H/W53H handset running a specific firmware version. When you register an older handset to the base station, the handset firmware will be automatically upgraded to a matched one. Accessing the Web User Interface 1. Press the OK key to enter the main menu, and then select Status->DM. The handset LCD screen displays the IP address of the W80B. 2. Open a web browser on your computer, enter the IP address into the address bar (for example, "http://192.168.0.10" or "192.168.0.10"), and then press the Enter. 3. Enter the user name (default: admin) and password (default: admin) in the login page and click Confirm. 3

Regulatory Notices Do not disconnect the grounding cable until you disconnect all other cables. Operating Ambient Temperatures Battery Requirements • Operating temperature: +32 to 104°F (0 to 40°C) • Do not immerse the battery into water, which could short-circuit and dam- • Relative humidity: 5% to 90%, noncondensing age the battery. • Storage temperature: -22 to +160°F (-30 to +70°C) • Do not expose the battery to an open flame or leave the battery where it Warranty could be subjected to extremely high temperatures, which could cause the Our product warranty is limited only to the unit itself, when used normally in ac- battery to explode. cordance with the operating instructions and the system environment. We are not • Do power the handset off before removing the battery. liable for damage or loss resulting from the use of this product, or for any claim • Do not try to use the battery for the power supply of any device other than from a third party. We are not liable for problems with Yealink device arising from this handset. the use of this product; we are not liable for financial damages, lost profits, claims • Do not open or mutilate the battery, released electrolyte is corrosive and from third parties, etc., arising from the use of this product. may cause damage to your eyes or skin. • Use only the rechargeable battery pack delivered with the handset or those Explanation of the symbols rechargeable battery packs expressly recommended by Yealink. • DC symbol Defective or exhausted battery should never be disposed of as municipal waste. Return old battery to the battery supplier, a licensed battery dealer or is the DC voltage symbol. a designated collection facility. • WEEE Warning symbol Cleaning Requirements To avoid the potential effects on the environment and human health as a • Before cleaning the device, disconnect it from the power supply. • Use a piece of soft, dry and anti-static cloth to clean the device. result of the presence of hazardous substances in electrical and electronic • Keep the power plug clean and dry. equipment, end users of electrical and electronic equipment should under stand the meaning of the crossed-out wheeled bin symbol. Do not dispose of Troubleshooting WEEE as unsorted municipal waste and have to collect such WEEE separately. The unit cannot supply power to Yealink device. There is a bad connection with the plug. Restriction of Hazardous Substances Directive (RoHS) 1. Clean the plug with a dry cloth. This device complies with the requirements of the EU RoHS Directive. Statements 2. Connect it to another wall outlet. of compliance can be obtained by contacting support@yealink.com. The usage environment is out of operating temperature range. Safety Instructions 1. Use in the operating temperature range. Save these instructions. Read these safety instructions before use! The cable between the unit and the Yealink device is connected incorrectly. 1. Connect the cable correctly. General Requirements You cannot connect the cable properly. • Before you install and use the device, read the safety instructions carefully 1. You may have connected a wrong Yealink device. and observe the situation during operation. 2. Use the correct power supply. • During the process of storage, transportation, and operation, please always Some dust, etc., may be in the port. keep the device dry and clean, avoid collision and crash. 1. Clean the port. • Please attempt not to dismantle the device by yourself. In case of any dis- Contact your dealer or authorized service facility for any further questions. crepancy, please contact the appointed maintenance center for repair. FCC Statement • Please refer to the relevant laws and statutes while using the device. Legal This device complies with part 15 of the FCC Rules. Operation is subject to the rights of others should be respected as well. following two conditions: (1) this device may not cause harmful interference, and Environmental Requirements (2) this device must accept any interference received, including interference that may cause undesired operation. • Place the device at a well-ventilated place. Do not expose the device under Any Changes or modifications not expressly approved by the party responsible direct sunlight. for compliance could void the user’s authority to operate the equipment. • Keep the device dry and free of dusts. • Do not place the device on or near any inflammable or fire-vulnerable ob- IC Statement ject, such as rubber-made materials. This device complies with Industry Canada’s licence-exempt RSSs. Operation is • Keep the device away from any heat source or bare fire, such as a candle or subject to the following two conditions: an electric heater. (1) this device may not cause interference; and (2) this device must accept any interference, including interference that may cause Operating Requirements undesired operation of the device. CAN ICES-3(B) • Do not let a child operate the device without guidance. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux ap- • Do not let a child play with the device or any accessory in case of acciden- pareils radio exempts de licence. L’exploitation est autorisée aux deux conditions tal swallowing. suivantes : • Please use the accessories provided or authorized by the manufacturer (1) l’appareil ne doit pas produire de brouillage; only. (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, • The power supply of the device shall meet the requirements of the input même si le brouillage est susceptible d’en compromettre le fonctionnement. voltage of the device. Please use the provided surge protection power socket NMB-3(B) only. • Before plugging or unplugging any cable, make sure that your hands are Radiation Exposure Statement completely dry. This equipment complies with FCC and IC radiation exposure limits set forth for • Do not spill liquid of any kind on the product or use the equipment near an uncontrolled environment. This equipment should be installed and operated water, for example, near a bathtub, washbowl, kitchen sink, wet basement or with minimum distance 20cm between the radiator and your body. near a swimming pool. Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps • During a thunderstorm, stop using the device and disconnect it from the qu’aucune autre antenne ou émetteur. Cet équipement devrait être installé et power supply. Unplug the power plug and the Asymmetric Digital Subscriber actionné avec une distance minimum de 20 centimètres entre le radiateur et votre Line (ADSL) twisted pair (the radio frequency cable) to avoid lightning strike. corps. • If the device is left unused for a rather long time, disconnect it from the Contact Information power supply and unplug the power plug. YEALINK NETWORK TECHNOLOGY CO.,LTD. • When there is smoke emitted from the device, or some abnormal noise or 309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R. smell, disconnect the device from the power supply, and unplug the power China plug immediately. YEALINK (EUROPE) NETWORK TECHNOLOGY B.V. • Contact the specified maintenance center for repair. Strawinskylaan 3127, Atrium Building, 8th floor, 1077ZX Amsterdam, The Nether- • Do not insert any object into equipment slots that is not part of the prod- lands uct or auxiliary product. YEALINK (USA) NETWORK TECHNOLOGY CO., LTD. • Before connecting a cable, connect the grounding cable of the device first. 999 Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, USA Made in China 4


About Yealink Yealink is a global leading provider of enterprise communication and collaboration solutions, offering video conferencing service to worldwide enterprises. Focusing on research and development, Yealink also insists on innovation and creation. With the outstanding technical patents of cloud computing , audio, video and image processing technology, Yealink has built up a panoramic collaboration solution of audio and video conferencing by merging its cloud services with a series of endpoints products. As one of the best providers in more than 140 countries and regions including the US, the UK and Australia, Yealink ranks No.1 in the global market share of SIP phones shipments. Technical Support Visit Yealink WIKI (http://support.yealink.com/) for the latest firmware, guides, FAQ, Product documents, and more. For better service, we sincerely recommend you to use Yealink Ticketing system (https://ticket.yealink.com) to submit all your technical issues. YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD. Web: www.yealink.com Copyright©2019 YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD.All rights reserved. W8 0 B - E N


Document Created: 2019-04-08 11:54:22
Document Modified: 2019-04-08 11:54:22
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC