1703RSU00901-15B Report

FCC ID: T2C-T40G

Test Report

Download: PDF
FCCID_3990865

MRT Technology (Suzhou) Co., Ltd Report No.: 1703RSU00901 Phone: +86-512-66308358 Report Version: V01 Web: www.mrt-cert.com Issue Date: 03-21-2017 MEASUREMENT REPORT FCC Part 15B FCC ID: T2C-T40G APPLICANT: YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD Application Type: Certification Product: Ultra-elegant Gigabit IP Phone Model No.: SIP-T40G Brand Name: YEALINK FCC Classification: FCC Class B Digital Device (JBP) FCC Rule Part(s): FCC Part 15 Subpart B: 2016 Test Procedure(s): ANSI C63.4: 2014 Test Date: March 10 ~ 13, 2017 Reviewed By : ( Robin Wu ) Approved By : ( Marlin Chen ) The test results relate only to the samples tested. This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.4-2014. Test results reported herein relate only to the item(s) tested. The test report shall not be reproduced except in full without the written approval of MRT Technology (Suzhou) Co., Ltd. FCC ID: T2C-T40G Page Number: 1 of 33

Report No.: 1703RSU00901 Revision History Report No. Version Description Issue Date Note 1703RSU00901 Rev. 01 Initial Report 03-21-2017 Valid FCC ID: T2C-T40G Page Number: 2 of 33

Report No.: 1703RSU00901 CONTENTS Description Page §2.1033 General Information ............................................................................................................ 4 1. INTRODUCTION ........................................................................................................................ 5 1.1. Scope .............................................................................................................................. 5 1.2. MRT Test Location .......................................................................................................... 5 2. PRODUCT INFORMATION ........................................................................................................ 6 2.1. Equipment Description .................................................................................................... 6 2.2. Test Configuration ........................................................................................................... 6 2.3. Test System Details ........................................................................................................ 8 2.4. Test Software .................................................................................................................. 8 2.5. EMI Suppression Device(s)/Modifications ....................................................................... 8 2.6. Labeling Requirements ................................................................................................... 8 3. DESCRIPTION OF TEST ........................................................................................................... 9 3.1. Evaluation Procedure ...................................................................................................... 9 3.2. AC Line Conducted Emissions ........................................................................................ 9 3.3. Radiated Emissions....................................................................................................... 10 4. TEST EQUIPMENT CALIBRATION DATE .............................................................................. 11 5. MEASUREMENT UNCERTAINTY ........................................................................................... 12 6. TEST RESULT ......................................................................................................................... 13 6.1. Summary ....................................................................................................................... 13 6.2. Conducted Emission Measurement .............................................................................. 14 6.2.1. Test Limit ................................................................................................................... 14 6.2.2. Test Setup ................................................................................................................. 14 6.2.3. Test Result ................................................................................................................. 15 6.3. Radiated Emission Measurement ................................................................................. 19 6.3.1. Test Limit ................................................................................................................... 19 6.3.2. Test Setup ................................................................................................................. 19 6.3.3. Test Result ................................................................................................................. 21 7. CONCLUSION.......................................................................................................................... 33 FCC ID: T2C-T40G Page Number: 3 of 33

Report No.: 1703RSU00901 §2.1033 General Information Applicant: YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD Applicant Address: 309, 3th Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R. China Manufacturer: YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD Manufacturer Address: 309, 3th Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R. China Test Site: MRT Technology (Suzhou) Co., Ltd Test Site Address: D8 Building, Youxin Industrial Park, No.2 Tian’edang Rd., Wuzhong Economic Development Zone, Suzhou, China MRT FCC Registration No.: 809388 Model No.: SIP-T40G FCC ID: T2C-T40G Test Device Serial No.: N/A Production Pre-Production Engineering FCC Classification: FCC Class B Digital Device (JBP) Test Facility / Accreditations Measurements were performed at MRT Laboratory located in Tian’edang Rd., Suzhou, China.  MRT facility is a FCC registered (MRT Reg. No. 809388) test facility with the site description report on file and has met all the requirements specified in Section 2.948 of the FCC Rules.  MRT facility is an IC registered (MRT Reg. No. 11384A-1) test laboratory with the site description on file at Industry Canada.  MRT facility is a VCCI registered (R-4179, G-814, C-4664, T-2206) test laboratory with the site description on file at VCCI Council.  MRT Lab is accredited to ISO 17025 by the American Association for Laboratory Accreditation (A2LA) under the American Association for Laboratory Accreditation Program (A2LA Cert. No. 3628.01) in EMC, Telecommunications and Radio testing for FCC, Industry Canada, EU and TELEC Rules. FCC ID: T2C-T40G Page Number: 4 of 33

Report No.: 1703RSU00901 1. INTRODUCTION 1.1. Scope Measurement and determination of electromagnetic emissions (EMC) of radio frequency devices including intentional and/or unintentional radiators for compliance with the technical rules and regulations of the Federal Communications Commission and the Industry Canada Certification and Engineering Bureau. 1.2. MRT Test Location The map below shows the location of the MRT LABORATORY, its proximity to the Taihu Lake. These measurement tests were conducted at the MRT Technology (Suzhou) Co., Ltd. Facility located at D8 Building, Youxin Industrial Park, No.2 Tian’edang Rd., Wuzhong Economic Development Zone, Suzhou, China. The detailed description of the measurement facility was found to be in compliance with the requirements of § 2.948 according to ANSI C63.4-2009 on September 30, 2013. FCC ID: T2C-T40G Page Number: 5 of 33

Report No.: 1703RSU00901 2. PRODUCT INFORMATION 2.1. Equipment Description Product Name Ultra-elegant Gigabit IP Phone Model No. SIP-T40G Adapter #1 M/N: YLPS050600C-US INPUT: 100-240V ~ 50/60Hz, 0.2A OUTPUT: 5Vdc, 0.6A Adapter #2 M/N: OH-1006B0500600U-UL INPUT: 100-240V ~ 50/60Hz, 250mA OUTPUT: 5Vdc, 600mA 2.2. Test Configuration The Ultra-elegant Gigabit IP Phone FCC ID: T2C-T40G was tested per the guidance FCC Part 15 Subpart B: 2016 and ANSI C63.4: 2014 was used to reference the appropriate EUT setup for radiated spurious emissions testing and AC line conducted testing. Connection Diagram(Mode 1 & 2) FCC ID: T2C-T40G Page Number: 6 of 33

Report No.: 1703RSU00901 Connection Diagram(Mode 3) Signal Cable Type Signal Cable Description A Power Cable Non-shielding, 1.8m B Telecom Cable Non-shielding, 0.1m C LAN Cable Non-shielding, > 10m D LAN Cable Non-shielding, > 10m E LAN Cable Non-shielding, 1m FCC ID: T2C-T40G Page Number: 7 of 33

Report No.: 1703RSU00901 2.3. Test System Details The types for all equipments, plus descriptions of all cables used in the tested system (including inserted cards) are: Product Manufacturer Model No. Serial No. Power Cord 1 Headset Yealink N/A N/A N/A 2 EHS Box Yealink EHS36 8400316030007806 N/A 3 5-Port Gigabit VULCAN VPS/05041GU 58152102310 Non-Shielded, 2m PoE Switch with 1 Port PD and 4 Port PSE 4 IP Phone Yealink SIP-T40G MAC 001565C0BD0E Non-shielding, 1.8m 5 Notebook Lenovo E430c MP-4CFX213/10 Non-Shielded, 1.8m 2.4. Test Software Not applicable. 2.5. EMI Suppression Device(s)/Modifications No EMI suppression device(s) were added and/or no modifications were made during testing. 2.6. Labeling Requirements Per 2.1074 & 15.19; Docket 95-19 The label shall be permanently affixed at a conspicuous location on the device; instruction manual or pamphlet supplied to the user and be readily visible to the purchaser at the time of purchase. However, when the device is so small wherein placement of the label with specified statement is not practical, only the FCC ID must be displayed on the device per Section 15.19(a)(5). Please see attachment for FCC ID label and label location. FCC ID: T2C-T40G Page Number: 8 of 33

Report No.: 1703RSU00901 3. DESCRIPTION OF TEST 3.1. Evaluation Procedure The measurement procedures described in the American National Standard for Methods of Measurement of Radio-Noise Emission from Low-Voltage Electrical Equipment in the Range of 9kHz to 18GHz (ANSI C63.4-2014) was used in the measurement of the Ultra-elegant Gigabit IP Phone FCC ID: T2C-T40G. Deviation from measurement procedure…………………………….....................................None 3.2. AC Line Conducted Emissions The line-conducted facility is located inside an 8'x4'x4' shielded enclosure. A 1m x 2m wooden table 80cm high is placed 40cm away from the vertical wall and 80cm away from the sidewall of the shielded room. Two 10kHz-30MHz, 50Ω/50uH Line-Impedance Stabilization Networks (LISNs) are bonded to the shielded room floor. Power to the LISNs is filtered by external high-current high-insertion loss power line filters. These filters attenuate ambient signal noise from entering the measurement lines. These filters are also bonded to the shielded enclosure. The EUT is powered from one LISN and the support equipment is powered from the second LISN. If the EUT is a DC-powered device, power will be derived from the source power supply it normally will be powered from and this supply line(s) will be connected to the second LISN. All interconnecting cables more than 1 meter were shortened to a 1 meter length by non-inductive bundling (serpentine fashion) and draped over the back edge of the test table. All cables were at least 40cm above the horizontal reference ground-plane. Power cables for support equipment were routed down to the second LISN while ensuring that that cables were not draped over the second LISN. Sufficient time for the EUT, support equipment, and test equipment was allowed in order for them to warm up to their normal operating condition. The RF output of the LISN was connected to the receiver and exploratory measurements were made to determine the frequencies producing the maximum emission from the EUT. The receiver was scanned from 150 kHz to 30 MHz. The detector function was set to peak mode for exploratory measurements while the bandwidth of the analyzer was set to 9 kHz. The EUT, support equipment, and interconnecting cables were arranged and manipulated to maximize each emission. Each emission was also maximized by varying: power lines, the mode of operation or resolution, clock or data exchange speed, scrolling H pattern to the EUT and/or support equipment whichever determined the worst-case emission. Once the worst case emissions have been identified, the one EUT cable configuration/arrangement and mode of operation that produced these emissions are used for final measurements on the same test site. Line conducted emissions test results are shown in Section 6.2. FCC ID: T2C-T40G Page Number: 9 of 33

Report No.: 1703RSU00901 3.3. Radiated Emissions The radiated test facilities consisted of an indoor 3 meter semi-anechoic chamber used for final measurements and exploratory measurements, when necessary. The measurement area is contained within the semi-anechoic chamber which is shielded from any ambient interference. For measurements above 1GHz absorbers are arranged on the floor between the turn table and the antenna mast in such a way so as to maximize the reduction of reflections. For measurements below 1GHz, the absorbers are removed. An MF Model 210SS turntable is used for radiated measurement. It is a continuously rotatable, remote controlled, metallic turntable and 2 meters (6.56 ft.) in diameter. The turn table is flush with the raised floor of the chamber in order to maintain its function as a ground plane. An 80cm high PVC support structure is placed on top of the turntable. For all measurements, the spectrum was scanned through all EUT azimuths and from 1 to 4 meter receive antenna height using a broadband antenna from 30 MHz up to the upper frequency shown in 15.33(b)(1) depending on the highest frequency generated or used in the device or on which the device operates or tunes. For frequencies above 1GHz, linearly polarized double ridge horn antennas were used. For frequencies below 30 MHz, a calibrated loop antenna was used. When exploratory measurements were necessary, they were performed at 1 meter test distance inside the semi-anechoic chamber using broadband antennas, broadband amplifiers, and spectrum analyzers to determine the frequencies and modes producing the maximum emissions. Sufficient time for the EUT, support equipment, and test equipment was allowed in order for them to warm up to their normal operating condition. The test set-up was placed on top of the 0.8 meter high, 1 x 1.5 meter table. The EUT, support equipment, and interconnecting cables were arranged and manipulated to maximize each emission. Appropriate precaution was taken to ensure that all emissions from the EUT were maximized and investigated. The system configuration, mode of operation, if applicable, turntable azimuth, and receive antenna height was noted for each frequency found. Final measurements were made in the semi-anechoic chamber using calibrated, linearly polarized broadband and horn antennas. The test setup was configured to the setup that produced the worst case emissions. The spectrum analyzer was set to investigate all frequencies required for testing to compare the highest radiated disturbances with respect to the specified limits. The turntable containing the EUT was rotated through 360 degrees and the height of the receive antenna was varied 1 to 4 meters and stopped at the azimuth and height producing the maximum emission. Each emission was maximized by changing the orientation of the EUT through three orthogonal planes and changing the polarity of the receive antenna, whichever produced the worst-case emissions. According to 3dB beam-width of horn antenna, the horn antenna should be always directed to the EUT when rising height. FCC ID: T2C-T40G Page Number: 10 of 33

Report No.: 1703RSU00901 4. TEST EQUIPMENT CALIBRATION DATE Conducted Emissions - SR2 Instrument Manufacturer Type No. Asset No. Cali. Interval Cali. Due Date EMI Test Receiver R&S ESR7 MRTSUE06001 1 year 2017/06/20 Two-Line V-Network R&S ENV216 MRTSUE06002 1 year 2017/06/20 Two-Line V-Network R&S ENV216 MRTSUE06003 1 year 2017/06/20 Temperature/Humidity Meter Yuhuaze HTC-2 MRTSUE06182 1 year 2017/12/20 Shielding Anechoic Chamber MIX-BEP Chamber-SR2 MRTSUE06215 1 year 2017/05/10 Radiated Emissions - AC1 Instrument Manufacturer Type No. Asset No. Cali. Interval Cali. Due Date MXE EMI Receiver Agilent N9038A MRTSUE06125 1 year 2017/08/03 Microwave System Amplifier Agilent 83017A MRTSUE06076 1 year 2017/03/29 TRILOG Antenna Schwarzbeck VULB9162 MRTSUE06022 1 year 2017/11/07 Horn Antenna Schwarzbeck BBHA9120D MRTSUE06023 1 year 2017/11/07 Temperature/Humidity Meter Yuhuaze HTC-2 MRTSUE06170 1 year 2017/11/30 Anechoic Chamber TDK Chamber-AC1 MRTSUE06213 1 year 2017/05/10 Software Version Function e3 V8.3.5 EMI Test Software FCC ID: T2C-T40G Page Number: 11 of 33

Report No.: 1703RSU00901 5. MEASUREMENT UNCERTAINTY Where relevant, the following test uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2. This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k = 2. AC Conducted Emission Measurement – SR2 Measuring Uncertainty for a Level of Confidence of 95% (U=2Uc(y)): 150kHz~30MHz: 3.5dB Radiated Emission Measurement – AC1 Measuring Uncertainty for a Level of Confidence of 95% (U=2Uc(y)): Horizontal: 30MHz~1GHz: 4.07dB 1GHz~18GHz: 4.16 dB Vertical: 30MHz~1GHz: 4.18 dB 1GHz~18GHz: 4.76 dB FCC ID: T2C-T40G Page Number: 12 of 33

Report No.: 1703RSU00901 6. TEST RESULT 6.1. Summary Product Name: Ultra-elegant Gigabit IP Phone FCC ID: T2C-T40G FCC Classification: FCC Class B Digital Device (JBP) Test Mode: Mode 1: Power by adapter #1 and Communicate with another IP Phone Mode 2: Power by adapter #2 and Communicate with another IP Phone Mode 3: Power by PoE and Communicate with another IP Phone FCC Part Section(s) Test Description Test Result 15.107 Conducted Emissions Pass 15.109 Radiated Emissions Pass FCC ID: T2C-T40G Page Number: 13 of 33

Report No.: 1703RSU00901 6.2. Conducted Emission Measurement 6.2.1.Test Limit FCC Part 15.107 Limits Frequency QP AV (MHz) (dBμV) (dBμV) 0.15 - 0.50 66 - 56 56 - 46 0.50 - 5.0 56 46 5.0 - 30 60 50 Note 1: The lower limit shall apply at the transition frequencies. Note 2: The limit decreases linearly with the logarithm of the frequency in the range 0.15MHz to 0.5MHz. 6.2.2.Test Setup FCC ID: T2C-T40G Page Number: 14 of 33

Report No.: 1703RSU00901 6.2.3.Test Result Site: SR2 Time: 2017/03/10 - 02:14 Limit: FCC_Part15.107_CE_Class B Engineer: Lewis Huang Probe: ENV216_101683_Filter On Polarity: Line EUT: Ultra-elegant Gigabit IP Phone Power: AC 120V/60Hz Test Mode 1 No Flag Mark Frequency Measure Reading Over Limit Limit Factor Type (MHz) Level Level (dB) (dBuV) (dB) (dBuV) (dBuV) 1 0.154 35.486 24.747 -30.295 65.781 10.740 QP 2 0.154 7.610 -3.129 -48.171 55.781 10.740 AV 3 0.206 27.891 17.910 -35.474 63.365 9.981 QP 4 0.206 5.085 -4.896 -48.280 53.365 9.981 AV 5 0.538 30.379 20.232 -25.621 56.000 10.147 QP 6 0.538 23.516 13.369 -22.484 46.000 10.147 AV 7 1.078 31.213 21.308 -24.787 56.000 9.905 QP 8 * 1.078 24.960 15.055 -21.040 46.000 9.905 AV 9 2.042 29.842 19.972 -26.158 56.000 9.869 QP 10 2.042 18.887 9.017 -27.113 46.000 9.869 AV 11 6.546 33.252 23.116 -26.748 60.000 10.136 QP 12 6.546 23.099 12.963 -26.901 50.000 10.136 AV Note: Measure Level (dBμV) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + LISN Factor (dB). FCC ID: T2C-T40G Page Number: 15 of 33

Report No.: 1703RSU00901 Site: SR2 Time: 2017/03/10 - 02:21 Limit: FCC_Part15.107_CE_Class B Engineer: Lewis Huang Probe: ENV216_101683_Filter On Polarity: Neutral EUT: Ultra-elegant Gigabit IP Phone Power: AC 120V/60Hz Test Mode 1 No Flag Mark Frequency Measure Reading Over Limit Limit Factor Type (MHz) Level Level (dB) (dBuV) (dB) (dBuV) (dBuV) 1 0.354 34.925 24.847 -23.943 58.868 10.078 QP 2 0.354 16.185 6.108 -32.683 48.868 10.078 AV 3 0.538 35.609 25.444 -20.391 56.000 10.166 QP 4 0.538 29.016 18.851 -16.984 46.000 10.166 AV 5 0.678 28.296 18.208 -27.704 56.000 10.087 QP 6 0.678 6.524 -3.563 -39.476 46.000 10.087 AV 7 1.078 36.795 26.889 -19.205 56.000 9.906 QP 8 * 1.078 30.081 20.175 -15.919 46.000 9.906 AV 9 1.530 34.810 24.922 -21.190 56.000 9.889 QP 10 1.530 21.351 11.462 -24.649 46.000 9.889 AV 11 2.158 33.874 24.004 -22.126 56.000 9.869 QP 12 2.158 21.576 11.706 -24.424 46.000 9.869 AV Note: Measure Level (dBμV) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + LISN Factor (dB). FCC ID: T2C-T40G Page Number: 16 of 33

Report No.: 1703RSU00901 Site: SR2 Time: 2017/03/10 - 02:26 Limit: FCC_Part15.107_CE_Class B Engineer: Lewis Huang Probe: ENV216_101683_Filter On Polarity: Line EUT: Ultra-elegant Gigabit IP Phone Power: AC 120V/60Hz Test Mode 2 No Flag Mark Frequency Measure Reading Over Limit Limit Factor Type (MHz) Level Level (dB) (dBuV) (dB) (dBuV) (dBuV) 1 0.162 35.818 25.721 -29.543 65.361 10.097 QP 2 0.162 9.810 -0.287 -45.551 55.361 10.097 AV 3 0.190 33.088 23.060 -30.948 64.037 10.029 QP 4 0.190 6.536 -3.493 -47.500 54.037 10.029 AV 5 0.366 22.196 12.138 -36.395 58.591 10.058 QP 6 0.366 10.948 0.890 -37.644 48.591 10.058 AV 7 1.078 28.477 18.572 -27.523 56.000 9.905 QP 8 * 1.078 24.466 14.560 -21.534 46.000 9.905 AV 9 2.118 28.587 18.719 -27.413 56.000 9.868 QP 10 2.118 18.276 8.408 -27.724 46.000 9.868 AV 11 6.490 33.174 23.050 -26.826 60.000 10.124 QP 12 6.490 23.344 13.220 -26.656 50.000 10.124 AV Note: Measure Level (dBμV) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + LISN Factor (dB). FCC ID: T2C-T40G Page Number: 17 of 33

Report No.: 1703RSU00901 Site: SR2 Time: 2017/03/10 - 02:29 Limit: FCC_Part15.107_CE_Class B Engineer: Lewis Huang Probe: ENV216_101683_Filter On Polarity: Neutral EUT: Ultra-elegant Gigabit IP Phone Power: AC 120V/60Hz Test Mode 2 No Flag Mark Frequency Measure Reading Over Limit Limit Factor Type (MHz) Level Level (dB) (dBuV) (dB) (dBuV) (dBuV) 1 0.158 37.387 27.098 -28.181 65.568 10.290 QP 2 0.158 9.944 -0.345 -45.624 55.568 10.290 AV 3 0.186 33.216 23.181 -30.997 64.213 10.035 QP 4 0.186 6.653 -3.382 -47.561 54.213 10.035 AV 5 1.074 33.843 23.937 -22.157 56.000 9.906 QP 6 * 1.074 28.624 18.718 -17.376 46.000 9.906 AV 7 1.614 31.432 21.546 -24.568 56.000 9.887 QP 8 1.614 21.712 11.826 -24.288 46.000 9.887 AV 9 2.066 30.922 21.050 -25.078 56.000 9.872 QP 10 2.066 20.177 10.305 -25.823 46.000 9.872 AV 11 6.490 36.649 26.513 -23.351 60.000 10.137 QP 12 6.490 25.434 15.297 -24.566 50.000 10.137 AV Note: Measure Level (dBμV) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + LISN Factor (dB). FCC ID: T2C-T40G Page Number: 18 of 33

Report No.: 1703RSU00901 6.3. Radiated Emission Measurement 6.3.1.Test Limit FCC Part 15.109 Limits Frequency Distance Level (MHz) (m) (dBμV/m) 30 - 88 3 40 88 - 216 3 43.5 216 - 960 3 46 Above 960 3 54 Note 1: The lower limit shall apply at the transition frequency. Note 2: Distance refers to the distance in meters between the measuring instrument antenna and the closed point of any part of the device or system. Note 3: E field strength (dBμV/m) = 20 log E field strength (uV/m) 6.3.2.Test Setup 30MHz ~ 1GHz Test Setup: FCC ID: T2C-T40G Page Number: 19 of 33

1~4 m \| (Antenna Tower) EUT l Antenna (Turntable) Pre—Amplifier o

Report No.: 1703RSU00901 6.3.3.Test Result Site: AC1 Time: 2017/03/10 - 00:58 Limit: FCC_Part15.109_RE(3m)_Class B Engineer: Lewis Huang Probe: VULB 9168 _20-2000MHz Polarity: Horizontal EUT: Ultra-elegant Gigabit IP Phone Power: AC 120V/60Hz Test Mode 1 No Flag Mark Frequency Measure Reading Over Limit Factor Ant Table Type (MHz) Level Level Limit (dBuV/m) (dB) Pos Pos (dBuV/m) (dBuV) (dB) (cm) (deg) 1 83.350 26.435 16.350 -13.565 40.000 10.085 100 152 QP 2 202.175 32.446 21.300 -11.054 43.500 11.146 100 226 QP 3 266.680 34.418 21.030 -11.582 46.000 13.388 100 325 QP 4 * 400.000 41.191 24.700 -4.809 46.000 16.490 254 339 QP 5 429.155 37.326 20.030 -8.674 46.000 17.296 165 245 QP 6 485.900 36.912 18.640 -9.088 46.000 18.272 100 136 QP Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m). FCC ID: T2C-T40G Page Number: 21 of 33

Report No.: 1703RSU00901 Site: AC1 Time: 2017/03/10 - 01:02 Limit: FCC_Part15.109_RE(3m)_Class B Engineer: Lewis Huang Probe: VULB 9168 _20-2000MHz Polarity: Vertical EUT: Ultra-elegant Gigabit IP Phone Power: AC 120V/60Hz Test Mode 1 No Flag Mark Frequency Measure Reading Over Limit Factor Ant Table Type (MHz) Level Level Limit (dBuV/m) (dB) Pos Pos (dBuV/m) (dBuV) (dB) (cm) (deg) 1 * 36.710 33.268 19.200 -6.732 40.000 14.069 100 236 QP 2 46.005 27.409 13.260 -12.591 40.000 14.149 100 228 QP 3 63.950 27.047 14.410 -12.953 40.000 12.637 100 176 QP 4 142.520 27.909 13.250 -15.591 43.500 14.659 100 110 QP 5 400.055 29.852 13.360 -16.148 46.000 16.492 100 246 QP 6 483.475 30.477 12.250 -15.523 46.000 18.227 100 330 QP Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m). FCC ID: T2C-T40G Page Number: 22 of 33

Report No.: 1703RSU00901 Site: AC1 Time: 2017/03/10 - 00:52 Limit: FCC_Part15.109_RE(3m)_Class B Engineer: Lewis Huang Probe: VULB 9168 _20-2000MHz Polarity: Horizontal EUT: Ultra-elegant Gigabit IP Phone Power: AC 120V/60Hz Test Mode 2 No Flag Mark Frequency Measure Reading Over Limit Factor Ant Table Type (MHz) Level Level Limit (dBuV/m) (dB) Pos Pos (dBuV/m) (dBuV) (dB) (cm) (deg) 1 79.955 27.734 17.650 -12.266 40.000 10.084 100 274 QP 2 127.970 32.235 18.630 -11.265 43.500 13.605 100 136 QP 3 202.175 33.466 22.320 -10.034 43.500 11.146 100 246 QP 4 286.565 35.602 21.630 -10.398 46.000 13.973 100 49 QP 5 400.055 36.502 20.010 -9.498 46.000 16.492 248 322 QP 6 * 429.620 37.654 20.350 -8.346 46.000 17.304 177 145 QP Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m). FCC ID: T2C-T40G Page Number: 23 of 33

Report No.: 1703RSU00901 Site: AC1 Time: 2017/03/10 - 00:52 Limit: FCC_Part15.109_RE(3m)_Class B Engineer: Lewis Huang Probe: VULB 9168 _20-2000MHz Polarity: Vertical EUT: Ultra-elegant Gigabit IP Phone Power: AC 120V/60Hz Test Mode 2 No Flag Mark Frequency Measure Reading Over Limit Factor Ant Table Type (MHz) Level Level Limit (dBuV/m) (dB) Pos Pos (dBuV/m) (dBuV) (dB) (cm) (deg) 1 * 35.370 31.893 18.000 -8.107 40.000 13.893 100 153 QP 2 46.503 30.638 16.500 -9.362 40.000 14.138 100 225 QP 3 63.950 28.987 16.350 -11.013 40.000 12.637 100 323 QP 4 80.925 28.689 18.630 -11.311 40.000 10.059 100 196 QP 5 424.790 30.809 13.620 -15.191 46.000 17.189 100 28 QP 6 483.475 30.847 12.620 -15.153 46.000 18.227 100 94 QP Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m). FCC ID: T2C-T40G Page Number: 24 of 33

Report No.: 1703RSU00901 Site: AC1 Time: 2017/03/10 - 00:35 Limit: FCC_Part15.109_RE(3m)_Class B Engineer: Lewis Huang Probe: VULB 9168 _20-2000MHz Polarity: Horizontal EUT: Ultra-elegant Gigabit IP Phone Power: By POE Test Mode 3 No Flag Mark Frequency Measure Reading Over Limit Factor Ant Table Type (MHz) Level Level Limit (dBuV/m) (dB) Pos Pos (dBuV/m) (dBuV) (dB) (cm) (deg) 1 75.105 27.364 16.630 -12.636 40.000 10.734 100 135 QP 2 196.950 31.662 20.400 -11.838 43.500 11.262 100 44 QP 3 286.565 34.332 20.360 -11.668 46.000 13.973 100 156 QP 4 * 400.000 40.891 24.400 -5.109 46.000 16.490 256 319 QP 5 429.155 36.976 19.680 -9.024 46.000 17.296 100 234 QP 6 933.555 35.037 10.250 -10.963 46.000 24.786 168 221 QP Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m). FCC ID: T2C-T40G Page Number: 25 of 33

Report No.: 1703RSU00901 Site: AC1 Time: 2017/03/10 - 00:42 Limit: FCC_Part15.109_RE(3m)_Class B Engineer: Lewis Huang Probe: VULB 9168 _20-2000MHz Polarity: Vertical EUT: Ultra-elegant Gigabit IP Phone Power: By POE Test Mode 3 No Flag Mark Frequency Measure Reading Over Limit Factor Ant Table Type (MHz) Level Level Limit (dBuV/m) (dB) Pos Pos (dBuV/m) (dBuV) (dB) (cm) (deg) 1 35.740 31.725 17.800 -8.275 40.000 13.924 100 124 QP 2 * 45.770 32.774 18.620 -7.226 40.000 14.153 100 241 QP 3 74.620 30.834 20.030 -9.166 40.000 10.804 100 16 QP 4 127.970 26.125 12.520 -17.375 43.500 13.605 100 227 QP 5 400.055 31.852 15.360 -14.148 46.000 16.492 100 325 QP 6 483.475 31.487 13.260 -14.513 46.000 18.227 100 241 QP Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m). FCC ID: T2C-T40G Page Number: 26 of 33

Report No.: 1703RSU00901 Site: AC1 Time: 2017/03/10 - 00:07 Limit: FCC_Part15.109_RE(3m)_Class B Engineer: Lewis Huang Probe: BBHA9120D_1-18GHz Polarity: Horizontal EUT: Ultra-elegant Gigabit IP Phone Power: AC 120V/60Hz Test Mode 1 No Flag Mark Frequency Measure Reading Over Limit Factor Ant Table Type (MHz) Level Level Limit (dBuV/m) (dB) Pos Pos (dBuV/m) (dBuV) (dB) (cm) (deg) 1 1204.000 38.817 47.984 -35.183 74.000 -9.167 100 165 PK 2 1204.000 24.083 33.250 -29.917 54.000 -9.167 100 74 AV 3 1731.000 38.402 45.737 -35.598 74.000 -7.335 100 255 PK 4 1731.000 22.915 30.250 -31.085 54.000 -7.335 100 185 AV 5 7621.500 44.932 36.883 -29.068 74.000 8.048 100 46 PK 6 * 7621.500 33.459 25.410 -20.541 54.000 8.048 100 315 AV Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB). FCC ID: T2C-T40G Page Number: 27 of 33

Report No.: 1703RSU00901 Site: AC1 Time: 2017/03/10 - 00:10 Limit: FCC_Part15.109_RE(3m)_Class B Engineer: Lewis Huang Probe: BBHA9120D_1-18GHz Polarity: Vertical EUT: Ultra-elegant Gigabit IP Phone Power: AC 120V/60Hz Test Mode 1 No Flag Mark Frequency Measure Reading Over Limit Factor Ant Table Type (MHz) Level Level Limit (dBuV/m) (dB) Pos Pos (dBuV/m) (dBuV) (dB) (cm) (deg) 1 1204.000 35.975 45.142 -38.025 74.000 -9.167 100 325 PK 2 1204.000 22.453 31.620 -31.547 54.000 -9.167 100 221 AV 3 1731.000 36.239 43.574 -37.761 74.000 -7.335 100 265 PK 4 1731.000 22.295 29.630 -31.705 54.000 -7.335 100 186 AV 5 7519.500 43.590 35.295 -30.410 74.000 8.295 100 45 PK 6 * 7519.500 30.715 22.420 -23.285 54.000 8.295 100 174 AV Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB). FCC ID: T2C-T40G Page Number: 28 of 33

Report No.: 1703RSU00901 Site: AC1 Time: 2017/03/10 - 00:11 Limit: FCC_Part15.109_RE(3m)_Class B Engineer: Lewis Huang Probe: BBHA9120D_1-18GHz Polarity: Horizontal EUT: Ultra-elegant Gigabit IP Phone Power: AC 120V/60Hz Test Mode 2 No Flag Mark Frequency Measure Reading Over Limit Factor Ant Table Type (MHz) Level Level Limit (dBuV/m) (dB) Pos Pos (dBuV/m) (dBuV) (dB) (cm) (deg) 1 1204.000 36.699 45.866 -37.301 74.000 -9.167 100 75 PK 2 1204.000 23.463 32.630 -30.537 54.000 -9.167 100 44 AV 3 2003.000 37.646 43.328 -36.354 74.000 -5.682 100 115 PK 4 2003.000 24.348 30.030 -29.652 54.000 -5.682 100 256 AV 5 7613.000 44.267 36.207 -29.733 74.000 8.060 100 332 PK 6 * 7613.000 32.310 24.250 -21.690 54.000 8.060 100 249 AV Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB). FCC ID: T2C-T40G Page Number: 29 of 33

Report No.: 1703RSU00901 Site: AC1 Time: 2017/03/10 - 00:15 Limit: FCC_Part15.109_RE(3m)_Class B Engineer: Lewis Huang Probe: BBHA9120D_1-18GHz Polarity: Vertical EUT: Ultra-elegant Gigabit IP Phone Power: AC 120V/60Hz Test Mode 2 No Flag Mark Frequency Measure Reading Over Limit Factor Ant Table Type (MHz) Level Level Limit (dBuV/m) (dB) Pos Pos (dBuV/m) (dBuV) (dB) (cm) (deg) 1 1467.500 36.502 44.349 -37.498 74.000 -7.848 100 41 PK 2 1467.500 22.453 30.300 -31.547 54.000 -7.848 100 112 AV 3 5216.000 38.981 35.766 -35.019 74.000 3.215 100 185 PK 4 5216.000 26.575 23.360 -27.425 54.000 3.215 100 352 AV 5 7817.000 44.981 36.577 -29.019 74.000 8.404 100 246 PK 6 * 7817.000 33.024 24.620 -20.976 54.000 8.404 100 144 AV Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB). FCC ID: T2C-T40G Page Number: 30 of 33

Report No.: 1703RSU00901 Site: AC1 Time: 2017/03/10 - 00:17 Limit: FCC_Part15.109_RE(3m)_Class B Engineer: Lewis Huang Probe: BBHA9120D_1-18GHz Polarity: Horizontal EUT: Ultra-elegant Gigabit IP Phone Power: By POE Test Mode 3 No Flag Mark Frequency Measure Reading Over Limit Factor Ant Table Type (MHz) Level Level Limit (dBuV/m) (dB) Pos Pos (dBuV/m) (dBuV) (dB) (cm) (deg) 1 1731.000 35.547 42.882 -38.453 74.000 -7.335 100 65 PK 2 1731.000 22.295 29.630 -31.705 54.000 -7.335 100 234 AV 3 5063.000 38.529 35.375 -35.471 74.000 3.154 100 158 PK 4 5063.000 27.474 24.320 -26.526 54.000 3.154 100 11 AV 5 9338.500 46.364 35.922 -27.636 74.000 10.442 100 312 PK 6 * 9338.500 34.582 24.140 -19.418 54.000 10.442 100 285 AV Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB). FCC ID: T2C-T40G Page Number: 31 of 33

Report No.: 1703RSU00901 Site: AC1 Time: 2017/03/10 - 00:18 Limit: FCC_Part15.109_RE(3m)_Class B Engineer: Lewis Huang Probe: BBHA9120D_1-18GHz Polarity: Vertical EUT: Ultra-elegant Gigabit IP Phone Power: By POE Test Mode 3 No Flag Mark Frequency Measure Reading Over Limit Factor Ant Table Type (MHz) Level Level Limit (dBuV/m) (dB) Pos Pos (dBuV/m) (dBuV) (dB) (cm) (deg) 1 1731.000 35.560 42.895 -38.440 74.000 -7.335 100 47 PK 2 1731.000 22.295 29.630 -31.705 54.000 -7.335 100 248 AV 3 4646.500 37.844 35.706 -36.156 74.000 2.138 100 153 PK 4 4646.500 25.458 23.320 -28.542 54.000 2.138 100 332 AV 5 9449.000 46.050 35.560 -27.950 74.000 10.490 100 349 PK 6 * 9449.000 33.740 23.250 -20.260 54.000 10.490 100 19 AV Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB). FCC ID: T2C-T40G Page Number: 32 of 33

Report No.: 1703RSU00901 7. CONCLUSION The data collected relate only the item(s) tested and show that the Ultra-elegant Gigabit IP Phone FCC ID: T2C-T40G has been tested to comply with the requirements specified in §15.107 and §15.109 of the FCC Rules. The End FCC ID: T2C-T40G Page Number: 33 of 33


Document Created: 2019-10-16 21:59:04
Document Modified: 2019-10-16 21:59:04
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC