SAR Scan Plots

FCC ID: SY4-B01008

RF Exposure Info

Download: PDF
FCCID_3566461

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSH170303051-20B DUT: Data Collector; Type: LT600; Communication System: GSM; Frequency: 824.2 MHz;Duty Cycle: 1:8 Medium parameters used: f = 824.2 MHz; σ = 0.98 mho/m; εr = 54.87; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(10.54, 10.54, 10.54); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Body Voice Back/GSM 850 Low/Area Scan (121x141x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.876 mW/g Body Voice Back/GSM 850 Low/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 19.1 V/m; Power Drift = 0.167 dB Peak SAR (extrapolated) = 1.20 W/kg SAR(1 g) = 0.808 mW/g; SAR(10 g) = 0.521 mW/g Maximum value of SAR (measured) = 0.871 mW/g SAR Plots Plot No.: 1#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSH170303051-20B DUT: Data Collector; Type: LT600; Communication System: GSM; Frequency: 836.6 MHz;Duty Cycle: 1:8 Medium parameters used: f = 836.6 MHz; σ = 0.99 mho/m; εr = 55.02; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(10.54, 10.54, 10.54); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Body Voice Back/GSM 850 Mid/Area Scan (121x141x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.881 mW/g Body Voice Back/GSM 850 Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 18.9 V/m; Power Drift = 0.190 dB Peak SAR (extrapolated) = 1.22 W/kg SAR(1 g) = 0.808 mW/g; SAR(10 g) = 0.517 mW/g Maximum value of SAR (measured) = 0.875 mW/g SAR Plots Plot No.: 2#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSH170303051-20B DUT: Data Collector; Type: LT600; Communication System: GSM; Frequency: 848.8 MHz;Duty Cycle: 1:8 Medium parameters used: f = 848.8 MHz; σ = 1 mho/m; εr = 55.13; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(10.54, 10.54, 10.54); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Body Voice Back/GSM 850 High/Area Scan (121x141x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.820 mW/g Body Voice Back/GSM 850 High/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 15.6 V/m; Power Drift = 0.179 dB Peak SAR (extrapolated) = 1.15 W/kg SAR(1 g) = 0.769 mW/g; SAR(10 g) = 0.494 mW/g Maximum value of SAR (measured) = 0.826 mW/g SAR Plots Plot No.: 3#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSH170303051-20B DUT: Data Collector; Type: LT600; Communication System: GPRS-4slots; Frequency: 824.2 MHz;Duty Cycle: 1:2 Medium parameters used: f = 824.2 MHz; σ = 0.98 mho/m; εr = 54.87; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(10.54, 10.54, 10.54); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Body Back/GSM 850 Low/Area Scan (121x141x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 1.41 mW/g Body Back/GSM 850 Low/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 25.6 V/m; Power Drift = 0.086 dB Peak SAR (extrapolated) = 1.92 W/kg SAR(1 g) = 1.14 mW/g; SAR(10 g) = 0.779 mW/g Maximum value of SAR (measured) = 1.35 mW/g SAR Plots Plot No.: 4#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSH170303051-20B DUT: Data Collector; Type: LT600; Communication System: GPRS-4slots; Frequency: 836.6 MHz;Duty Cycle: 1:2 Medium parameters used: f = 836.6 MHz; σ = 0.99 mho/m; εr = 55.02; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(10.54, 10.54, 10.54); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Body Back/GSM 850 Mid/Area Scan (121x141x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 1.33 mW/g Body Back/GSM 850 Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 23.6 V/m; Power Drift = -0.107 dB Peak SAR (extrapolated) = 1.87 W/kg SAR(1 g) = 1.04 mW/g; SAR(10 g) = 0.696 mW/g Maximum value of SAR (measured) = 1.24 mW/g SAR Plots Plot No.: 5#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSH170303051-20B DUT: Data Collector; Type: LT600; Communication System: GPRS-4slots; Frequency: 848.8 MHz;Duty Cycle: 1:2 Medium parameters used: f = 848.8 MHz; σ = 1 mho/m; εr = 55.13; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(10.54, 10.54, 10.54); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Body Back/GSM 850 High/Area Scan (121x141x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) =1.21 mW/g Body Back/GSM 850 High/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 21.6 V/m; Power Drift = 0.179 dB Peak SAR (extrapolated) = 1.83 W/kg SAR(1 g) = 0.980 mW/g; SAR(10 g) = 0.671 mW/g Maximum value of SAR (measured) = 1.18 mW/g SAR Plots Plot No.: 6#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSH170303051-20B DUT: Data Collector; Type: LT600; Communication System: GPRS-4slots; Frequency: 836.6 MHz;Duty Cycle: 1:2 Medium parameters used: f = 836.6 MHz; σ = 0.99 mho/m; εr = 55.02; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(10.54, 10.54, 10.54); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Body Left/GSM 850 Mid/Area Scan (121x141x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.440 mW/g Body Left/GSM 850 Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 18.7 V/m; Power Drift = -0.075 dB Peak SAR (extrapolated) = 0.703 W/kg SAR(1 g) = 0.389 mW/g; SAR(10 g) = 0.227 mW/g Maximum value of SAR (measured) = 0.433 mW/g SAR Plots Plot No.: 7#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSH170303051-20B DUT: Data Collector; Type: LT600; Communication System: GPRS-4slots; Frequency: 836.6 MHz;Duty Cycle: 1:2 Medium parameters used: f = 836.6 MHz; σ = 0.99 mho/m; εr = 55.02; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(10.54, 10.54, 10.54); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Body Bottom/GSM 850 Mid/Area Scan (121x141x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.733 mW/g Body Bottom/GSM 850 Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 20.1 V/m; Power Drift = -0.169 dB Peak SAR (extrapolated) = 1.18 W/kg SAR(1 g) = 0.605 mW/g; SAR(10 g) = 0.321 mW/g Maximum value of SAR (measured) = 0.712 mW/g SAR Plots Plot No.: 8#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSH170303051-20B DUT: Data Collector; Type: LT600; Communication System: LTE FDD; Frequency: 2510 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2510 MHz; σ = 2.09 mho/m; εr = 52.33; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(7.59, 7.59, 7.59); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Body Back/LTE Band 7 1RB Low/Area Scan (91x121x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.891 mW/g Body Back/LTE Band 7 1RB Low/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 17.8 V/m; Power Drift = -0.023 dB Peak SAR (extrapolated) = 2.05 W/kg SAR(1 g) = 0.967 mW/g; SAR(10 g) = 0.456 mW/g Maximum value of SAR (measured) = 1.21 mW/g SAR Plots Plot No.: 9#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSH170303051-20B DUT: Data Collector; Type: LT600; Communication System: LTE FDD; Frequency: 2535 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2535 MHz; σ = 2.12 mho/m; εr = 52.68; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(7.59, 7.59, 7.59); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Body Back/LTE Band 7 1RB Mid/Area Scan (91x121x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 1.28 mW/g Body Back/LTE Band 7 1RB Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 22.5 V/m; Power Drift = 0.039 dB Peak SAR (extrapolated) = 2.16 W/kg SAR(1 g) = 1.07 mW/g; SAR(10 g) = 0.513 mW/g Maximum value of SAR (measured) = 1.33 mW/g SAR Plots Plot No.: 10#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSH170303051-20B DUT: Data Collector; Type: LT600; Communication System: LTE FDD; Frequency: 2560 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2560 MHz; σ = 2.17 mho/m; εr = 51.86; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(7.59, 7.59, 7.59); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Body Back/LTE Band 7 1RB High/Area Scan (91x121x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 1.05 mW/g Body Back/LTE Band 7 1RB High/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 16.4 V/m; Power Drift = -0.055 dB Peak SAR (extrapolated) = 1.77 W/kg SAR(1 g) = 0.843 mW/g; SAR(10 g) = 0.404 mW/g Maximum value of SAR (measured) = 1.09 mW/g SAR Plots Plot No.: 11#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSH170303051-20B DUT: Data Collector; Type: LT600; Communication System: LTE FDD; Frequency: 2535 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2535 MHz; σ = 2.12 mho/m; εr = 52.68; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(7.59, 7.59, 7.59); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Body Back/LTE Band 7 50RB Mid/Area Scan (91x121x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.891 mW/g Body Back/LTE Band 7 50RB Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 14.6 V/m; Power Drift = 0.028 dB Peak SAR (extrapolated) = 1.42 W/kg SAR(1 g) = 0.707 mW/g; SAR(10 g) = 0.376 mW/g Maximum value of SAR (measured) = 0.885 mW/g SAR Plots Plot No.: 12#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSH170303051-20B DUT: Data Collector; Type: LT600; Communication System: LTE FDD; Frequency: 2535 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2535 MHz; σ = 2.12 mho/m; εr = 52.68; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(7.59, 7.59, 7.59); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Body Back/LTE Band 7 100RB Mid/Area Scan (91x121x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.883 mW/g Body Back/LTE Band 7 100RB Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 12.2 V/m; Power Drift = -0.117 dB Peak SAR (extrapolated) = 1.37 W/kg SAR(1 g) = 0.673 mW/g; SAR(10 g) = 0.351 mW/g Maximum value of SAR (measured) = 0.826 mW/g SAR Plots Plot No.: 13#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSH170303051-20B DUT: Data Collector; Type: LT600; Communication System: LTE FDD; Frequency: 2535 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2535 MHz; σ = 2.12 mho/m; εr = 52.68; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(7.59, 7.59, 7.59); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Body Left/LTE Band 7 1RB Mid/Area Scan (91x121x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.288 mW/g Body Left/LTE Band 7 1RB Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 10.4 V/m; Power Drift = 0.185 dB Peak SAR (extrapolated) = 0.460 W/kg SAR(1 g) = 0.223 mW/g; SAR(10 g) = 0.106 mW/g Maximum value of SAR (measured) = 0.276 mW/g SAR Plots Plot No.: 14#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSH170303051-20B DUT: Data Collector; Type: LT600; Communication System: LTE FDD; Frequency: 2535 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2535 MHz; σ = 2.12 mho/m; εr = 52.68; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(7.59, 7.59, 7.59); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Body Left/LTE Band 7 50RB Mid/Area Scan (91x121x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.243 mW/g Body Left/LTE Band 7 50RB Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 10.8 V/m; Power Drift = -0.071 dB Peak SAR (extrapolated) = 0.449 W/kg SAR(1 g) = 0.219 mW/g; SAR(10 g) = 0.097 mW/g Maximum value of SAR (measured) = 0.257 mW/g SAR Plots Plot No.: 15#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSH170303051-20B DUT: Data Collector; Type: LT600; Communication System: LTE FDD; Frequency: 2535 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2535 MHz; σ = 2.12 mho/m; εr = 52.68; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(7.59, 7.59, 7.59); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Body Bottom/LTE Band 7 1RB Mid/Area Scan (91x121x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.861 mW/g Body Bottom/LTE Band 7 1RB Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 14.3 V/m; Power Drift = 0.203 dB Peak SAR (extrapolated) = 1.51 W/kg SAR(1 g) = 0.743 mW/g; SAR(10 g) = 0.312 mW/g Maximum value of SAR (measured) = 0.885 mW/g SAR Plots Plot No.: 16#

Bay Area Compliance Laboratories Corp. (kunshan) Report No: RSH170303051-20B DUT: Data Collector; Type: LT600; Communication System: LTE FDD; Frequency: 2535 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2535 MHz; σ = 2.12 mho/m; εr = 52.68; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: - Probe: EX3DV4 – SN7382; ConvF(7.59, 7.59, 7.59); Calibrated: 26/10/2016 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE – SN772; Calibrated: 25/10/2016 - Phantom: TWIN SAM; Type: Twin SAM V5.0; Serial: 1909 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Body Bottom/LTE Band 7 50RB Mid/Area Scan (91x121x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.862 mW/g Body Bottom/LTE Band 7 50RB Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 13.6 V/m; Power Drift = -0.137 dB Peak SAR (extrapolated) = 1.44 W/kg SAR(1 g) = 0.664 mW/g; SAR(10 g) = 0.290 mW/g Maximum value of SAR (measured) = 0.823 mW/g SAR Plots Plot No.: 17#


Document Created: 2017-09-13 15:04:44
Document Modified: 2017-09-13 15:04:44
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC