MPE Report

FCC ID: SWX-ULTE

RF Exposure Info

Download: PDF
FCCID_4047246

313 West 12800 South, Suite 311, Draper, UT 84020 • (801) 260-4040 Maximum Permissible Exposure (MPE) Requirement This document was prepared in by VPI Laboratories on behalf of the applicant using data collected during testing and information provided by the applicant. The maximum power density requirements for the General Public (Uncontrolled Environment) listed in FCC Part 1.1310 were used. The power density is calculated using the following equation. 𝑃𝑡 𝐺 ∗ - 𝑃𝑑 = 4𝜋𝑟 2 Pd = power density in watts Pt = transmit power in milliwatts G = numeric antenna gain r = distance between body and transmitter in centimeters ∗ 𝑃𝑡 𝐺 = EIRP All operating supported by this device was considered in this MPE Exhibit. The calculated power density of the EUT listed in this application is calculated below. WiFi Radio: Max Transmit Power ERP (mW): 5.89E+01 Max Antenna Gain (dBi): 1.5 Operating Frequency (MHz): 2412 (Numeric Antenna Gain): 1.41 Min Operating Distance (cm): 20 Duty Cycle (%): 100 Power Density (mW/cm2): 1.65E-02 Limit (mW/cm2): 1.00E+00 Delta: -9.83E-01 Assuming wholly constructive interaction (worst case): Operating Frequency (MHz): 699 (Numeric Antenna Gain): 1.41 Min Operating Distance (cm): 20 Duty Cycle (%): 100 WiFi Power Density (mW/cm2): 1.65E-02 LTE Power Density (mW/cm2): 1.99E-01 Limit (mW/cm2): 4.66E-01 Delta: -2.50E-01 Signed: Joseph W. Jackson Reviewer MPE Calculation (FCC) r1 Page 1 of 1 PROPRIETARY


Document Created: 2018-10-22 15:29:20
Document Modified: 2018-10-22 15:29:20
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC