User Manaul Part 1

FCC ID: SWX-UAPXG

Users Manual

Download: PDF
FCCID_3921994

Quad-Radio 802.11ac Wave 2 Access Point with Dedicated Security Model: UAP-XG

Introduction Thank you for purchasing the Ubiquiti Networks® UniFi® Quad‑Radio 802.11ac Wave 2 Access Point with Dedicated Security. This Quick Start Guide is designed to guide you through installation and includes warranty terms. IMPORTANT: The UAP-XG requires the UniFi Controller v5.7 or above, available at: www.ubnt.com/download/unifi Package Contents UniFi AP XG Mounting Ceiling Backing Ceiling Screws Keps Nuts Plate Plate (Qty. 4) (Qty. 4) T-Bar Mounts T-Bar Screws Allen Wall Screws Screw Anchors (Qty. 2) (Qty. 2) Wrench (Qty. 4) (Qty. 4) Quad-Radio 802.11ac Wave 2 Access Point with Dedicated Security Model: UAP-XG Release Cable Gigabit PoE Power Quick Start Tool Feed Plug (50V, 1.2A)* Cord* Guide * Included only with the single-pack of the UAP-XG. TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and earth grounding must be used as conditions of product warranty. It is the professional installer’s responsibility to follow local country regulations, including operation within legal frequency channels, output power, and Dynamic Frequency Selection (DFS) requirements.

Installation Requirements • Phillips screwdriver • Drill and drill bit (8 mm for wall mounting or 3 mm for ceiling tile mounting) • Optional: Drywall or keyhole saw (to cut 18 mm hole for Ethernet cable feed) • Cat6A UTP cable for indoor installations Outdoor Installation Requirements IMPORTANT: The UAP-XG may be installed outdoors under an eave or other protected location. Do not install the UAP-XG in an open environment. • Mounting location should be at least 60 cm (2 ft) from the edge of the eave or ceiling. • Cable feed opening must be directed away from the open environment. • Cable feed must be pointed downwards when wall-mounted. • Shielded Category 6 (or above) cabling should be used for all outdoor wired Ethernet connections and should be grounded through the AC ground of the PoE. System Requirements • Linux, Mac OS X, or Microsoft Windows 7/8/10 • Java Runtime Environment 1.8 or above • Web Browser: Google Chrome (Other browsers may have limited functionality.) • UniFi Controller software v5.7 or above (available at: www.ubnt.com/download/unifi)

Network Topology Requirements • A DHCP-enabled network (for the AP to obtain an IP address as well as for the wireless clients after deployment) • A UniFi Cloud Key or management station running the UniFi Controller v5.7 (or above) software, located either on-site and connected to the same Layer 2 network, or off-site in the cloud or NOC ubnt ubnt UAP-XG UWB-XG UWB-XG SDN Portland Everything is great Last 24 Hrs ISP Load: Great Network: Great Good Fair Poor Wi-Fi Load: Great Max High UniFi Switch 125.2 Mbps 225.2 Mbps -2 Low -24hrs Throughput Now -24hrs Retry Rate Now 980 Max 0 43% 18% 12 20 412 113 45 0 -24hrs Latency Now Internet Gateway Switches Access Points Clients Guests IoT -24hrs -8ধ1' Now Capacity ধ£-A!ধ32 -f -8!ă$-9;8-#<ধ32 ‰W‹ A Œ A 1 6 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165 My Dashboard Edit Widgets 39;$ধ='9 '=-$'-9;8-#<ধ32 36'138@9!+' 2;'82';322'$ধ32V 3>2£3!& ,'38'ধ$!£!6!$-;@ Throughput 36Œ66£-$!ধ329 -f -<11!8@ ă$' 91 GB f-;$,'2 56.9% 50 Mbps 33+£' ˆ‰£-'2;9 92£-2' 32 40 Mbps Back Room 86 GB f32('8'2$' 35.6% Facebook ‰‡£-'2;9 £-'2;9 1,324 30 Mbps 13 LAN Storage 53 GB 03 WLAN Storage 34% 20 Mbps YouTube ŠŒ£-'2;9 ধ£-A!ধ32 64% 01 WAN 10 Mbps Roof 48 GB Roof 28% 29;!+8!1 ˆŽ£-'2;9 8!ă$ 248 GB 0 Mbps !££>!@'WWW 45 GB !££>!@'WWW 24% -24 hrs -12 hrs Now Squarespace ˆ£-'2;9 Devices 536 Wi-Fi Key Metrics 39;$ধ='£-'2;9 39;$ধ='>-;$,'9 £-'2; 8'7<'2$@-9;8-#<ধ32 3<ধ2+ধ£-A!ধ32 -,32' Žˆ£-'2;9 SW-24A 56.9% !;'>!@f !-2 ‰Œ¦ধ£-A!ধ32 Average Capacity 500 Mbps 0% 100% 0 Mbps 1300 Mbps 2&83-& ¥£-'2;9 SW-8A 35.6% ='8!+'-8ধ1'ধ£-A!ধ32 8% 32;83££'8fă$' Œ‡¦ধ£-A!ধ32 50% 64% 11ac W2 MacBook ‹Œ£-'2;9 SW-8B 34% 28% 11ac 08% 11n 0% 100% 0% 100% Œ A PC Laptop ŠŒ£-'2;9 SW-24E 28% ='8!+'6'$;8!£ ă$-'2$@ ‰Wˆl#c9m A 32;83££'8fă$'‰ ŠŠ¦ধ£-A!ধ32 l#c9m A ŠW¤l#c9m A iPad ˆ‰£-'2;9 SW-24D 24% 0% 100% Top CPU Usage Top Interference 32+'9;£-'2;6ধ1' >-;$,<11!8@ Port Usage !1' Status Users Guests Purpose ='8!+'!;! ă$' 51% !££>!@'WWW 51% iPad-1 8d 4h 0m 2£-2' 24 Port 1- GB 120 VPN-LA-PDX 21 2 Corporate 320 GB Back Room 45% Roof 45% MBP-2 2d 8h 30m £-'2;9 1,324 Port 2- GB POE+ 80 VPN-LA-PDX2 6 0 2£@ 11 GB Home 43% Storage 44% iPad-2 2d 5h 15m 38;ধ£-A!ধ32 32% Port 3- 10 GB 32 '13;'fă$'fˆ 43 0 2£@ 12 GB ă$'f8;'6; 42% f32('8'2$' 42% MBP-1 2d 3h 10m 8!ă$ 1,248 GB Port 4- GB POE 13 8!29('8fˆ 7 12 2£@ 0 GB UniFi Hybrid Cloud Install US-16-XG LAN USG-PRO-4 WAN (DHCP Server) Internet SDN Portland Everything is great Last 24 Hrs ISP Load: Great Network: Great Good Fair Poor Wi-Fi Load: Great Max High 125.2 Mbps 225.2 Mbps -2 Low -24hrs Throughput Now -24hrs Retry Rate Now 980 Max 0 43% 18% 12 20 412 113 45 0 -24hrs Latency Now Internet Gateway Switches Access Points Clients Guests IoT -24hrs -8ধ1' Now Capacity ধ£-A!ধ32 -f -8!ă$-9;8-#<ধ32 ‰W‹ A Œ A 1 6 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165 My Dashboard Edit Widgets 39;$ধ='9 '=-$'-9;8-#<ধ32 36'138@9!+' 2;'82';322'$ধ32V 3>2£3!& ,'38'ধ$!£!6!$-;@ Throughput 36Œ66£-$!ধ329 -f -<11!8@ ă$' 91 GB f-;$,'2 56.9% 50 Mbps 33+£' ˆ‰£-'2;9 92£-2' 32 40 Mbps Back Room 86 GB f32('8'2$' 35.6% Facebook ‰‡£-'2;9 £-'2;9 1,324 30 Mbps 13 LAN Storage 53 GB 03 WLAN Storage 34% 20 Mbps YouTube ŠŒ£-'2;9 ধ£-A!ধ32 64% 01 WAN 10 Mbps Roof 48 GB Roof 28% 29;!+8!1 ˆŽ£-'2;9 8!ă$ 248 GB 0 Mbps !££>!@'WWW 45 GB !££>!@'WWW 24% -24 hrs -12 hrs Now Squarespace ˆ£-'2;9 Devices 536 Wi-Fi Key Metrics 39;$ধ='£-'2;9 39;$ধ='>-;$,'9 £-'2; 8'7<'2$@-9;8-#<ধ32 3<ধ2+ধ£-A!ধ32 -,32' Žˆ£-'2;9 SW-24A 56.9% !;'>!@f !-2 ‰Œ¦ধ£-A!ধ32 Average Capacity 500 Mbps 0% 100% 0 Mbps 1300 Mbps 2&83-& ¥£-'2;9 SW-8A 35.6% ='8!+'-8ধ1'ধ£-A!ধ32 8% 32;83££'8fă$' Œ‡¦ধ£-A!ধ32 50% 64% 11ac W2 MacBook ‹Œ£-'2;9 SW-8B 34% 28% 11ac 08% 11n 0% 100% 0% 100% Œ A PC Laptop ŠŒ£-'2;9 SW-24E 28% ='8!+'6'$;8!£ ă$-'2$@ ‰Wˆl#c9m A 32;83££'8fă$'‰ ŠŠ¦ধ£-A!ধ32 l#c9m A ŠW¤l#c9m A iPad ˆ‰£-'2;9 SW-24D 24% 0% 100% Top CPU Usage Top Interference 32+'9;£-'2;6ধ1' >-;$,<11!8@ Port Usage !1' Status Users Guests Purpose ='8!+'!;! ă$' 51% !££>!@'WWW 51% iPad-1 8d 4h 0m 2£-2' 24 Port 1- GB 120 VPN-LA-PDX 21 2 Corporate 320 GB Back Room 45% Roof 45% MBP-2 2d 8h 30m £-'2;9 1,324 Port 2- GB POE+ 80 VPN-LA-PDX2 6 0 2£@ 11 GB Home 43% Storage 44% iPad-2 2d 5h 15m 38;ধ£-A!ধ32 32% Port 3- 10 GB 32 '13;'fă$'fˆ 43 0 2£@ 12 GB ă$'f8;'6; 42% f32('8'2$' 42% MBP-1 2d 3h 10m 8!ă$ 1,248 GB Port 4- GB POE 13 8!29('8fˆ 7 12 2£@ 0 GB Remote Access to UniFi Controller Sample Network Diagram All UniFi devices support off-site management controllers. For setup details, see the User Guide on the website: www.ubnt.com/download/unifi

Hardware Overview LED LED Color Status White Factory default, waiting to be adopted. Flashing White Initializing. Device is busy; do not touch or unplug it. Alternating This usually indicates that a process such White/Blue as a firmware upgrade is taking place. Indicates the device has been successfully Blue adopted by a network and is working properly. This is used to locate an AP. Quickly When you click Locate in the UniFi Flashing Blue Controller software, the AP will flash. It will also display the location of the AP on the map. Steady Blue Indicates the device is in an isolated state with Occasional (all WLANs are brought down until an Flashing uplink is found).

Ports Security Slot M/N: UAP-XG 802.3bt PoE FCC ID: SWX-UAPXG IC: 6545A-UAPXG Contains FCC ID: SWX-M442G Contains IC: 6545A-M442G Contains FCC ID: SWX-M445GL Contains IC: 6545A-M445GL Contains FCC ID: SWX-M445GH Contains IC: 6545A-M445GH Reset 10 GbE Button Port 1 GbE Port Reset The Reset button serves two functions for the UAP-XG: • Restart Press and release the Reset button quickly. • Restore to Factory Default Settings Press and hold the Reset button for more than five seconds. 1 GbE The 1 GbE port is a 10/100/1000 Ethernet port used for bridging. It can also be used to connect the power. 10 GbE The 10 GbE port is a 1/10 Gbps Ethernet port used to connect the power and should be connected to the LAN and DHCP server. For 10 Gbps operation, connect the UAP-XG to an 802.3bt POE switch. Note: The UAP-XG can also be powered using a 50V, 1.2A Gigabit PoE adapter. For instructions on using the adapter, see Powering the UniFi AP. Note: If you need to remove the UAP-XG from the Mounting Plate, insert the included Release Tool in the Security Slot to release the Lock Tab and turn the UAP-XG counterclockwise.

Mounting Plate The Mounting Plate offers a variety of mounting holes for different applications. The legend printed on the Mounting Plate identifies the holes used for each application. Upgrade from UAP-AC-PRO The UAP-XG is compatible with the UAP‑AC‑PRO mounting hardware, so you only need to remove the UAP‑AC‑PRO and replace it with the UAP-XG. To begin the upgrade: 1. Insert the Release Tool into the UAP-AC‑PRO Security Slot to disengage the lock. Then turn the UAP‑AC‑PRO counterclockwise and lift it off of the mounting bracket. Security Slot UAP-AC-PRO (Wall Mount Installation) 2. Unplug the Ethernet cable from the Main port. 3. Go to the Connecting Ethernet section.

Hardware Installation The UAP-XG can be mounted on a wall, ceiling tile, drop ceiling T-rail (up to 40 mm), or electrical junction box. Perform the steps for the appropriate installation. Note for UniFi AP replacement: The holes marked “A” on the Mounting Plate line up with the holes of mounting brackets used for previous UniFi AP models. Wall Mount 1. Position the Mounting Plate at the desired location on the wall with the Arrow pointing up. 2. Mark the four mounting holes marked “A”, and use an 8 mm drill bit to drill the holes. If your Ethernet cable feeds through the wall, cut or drill a hole approximately 18 mm in diameter. Then feed the CAT6A cable through the hole. Arrow New New Install Install Optional 18 mm Hole for Ethernet Cable Feed through the Wall *640-00341-05* 640-00341-05

3. Insert the Screw Anchors into the holes. Secure the Mounting Plate to the wall by inserting the Wall Screws into the anchors. 4. Go to the Connecting Ethernet section, and then return to step 5. 5. Align the Arrow on the top edge of the UAP-XG with the Arrow on the Mounting Plate. Arrow Arrow Lock Tab

6. Rotate the UAP-XG clockwise until the tabs lock into place and the Lock Tab engages. Ceiling Mount 1. Remove the ceiling tile. 2. Place the Ceiling Backing Plate in the center of the ceiling tile. Mark the four mounting screw holes and an 18 mm hole for the Ethernet cable feed. Optional 18 mm Hole for Ethernet Cable Feed through the Ceiling Tile

3. Use a 3 mm drill bit to drill the screw holes, and cut or drill the 18 mm hole for the Ethernet cable feed. 4. Insert the Ceiling Screws through the Mounting Plate, ceiling tile, and Ceiling Backing Plate. Fasten the screws using the Keps Nuts. Then feed the Ethernet cable through the tile and bracket.

5. Perform the steps in the Connecting Ethernet section, and then return to step 6. 6. Align the Arrow on the top edge of the UAP-XG with the Arrow on the Mounting Plate. Arrow Lock Tab Arrow 7. Rotate the UAP-XG clockwise until the tabs lock into place and the Lock Tab engages. 8. Set the ceiling tile back into place.

T-Bar Mount 1. Remove the ceiling tiles on both sides of the T-bar you will use for mounting. 2. Loosen the set screws of the T-Bar Mounts. 3. Insert the T-bar into a T-Bar Mount, and turn the T-Bar Mount clockwise to attach it. Use the included Allen Wrench to tighten the two set screws to secure the T-Bar Mount. 4. Attach the second T-Bar Mount but do not tighten the set screws.

5. Use the two dashed lines on the Mounting Plate to space the T-Bar Mounts 77 mm (3") apart. 77 m m 6. Tighten the two set screws on the second T-Bar Mount.

7. Insert the included T-Bar Screws into the holes marked “B” on the Mounting Plate, and then secure the plate to the T-Bar Mounts. 8. Drop the Ethernet cable between the plate and T-bar.

9. Perform the steps in the Connecting Ethernet section, and then return to step 10. 10. Align the Arrow on the top edge of the UAP-XG with the Arrow on the Mounting Plate. Arrow Lock Tab Arrow 11. Rotate the UAP-XG clockwise until the tabs lock into place and the Lock Tab engages. 12. Set the ceiling tiles back into place.

Junction or Outlet Box Mount 1. Use the legend printed on the Mounting Plate to select the appropriate mounting holes for your installation. 2. Pull the Ethernet cable through the Mounting Plate, and attach the Mounting Plate to the junction or outlet box using at least two screws (not included). Note: For in-wall applications, position the Mounting Plate with the Arrow pointing upwards. 3. Perform the steps in the Connecting Ethernet section, and then return to step 4.

4. Align the Arrow on the top edge of the UAP-XG with the Arrow on the Mounting Plate. Arrow Arrow Lock Tab 5. Rotate the UAP-XG clockwise until the tabs lock into place and the Lock Tab engages.

Connecting Ethernet 1. Remove the rubber port cover from the UAP-XG. 2. If the Ethernet cable runs along the mounting surface, skip to step 3. If the Ethernet cable is fed through the wall or ceiling, insert the Cable Feed Plug. 3. Feed the Ethernet cable through the port cover. Note: The feed hole will stretch to accommodate the RJ45 connector, and then seal around the cable. 4. Connect the Ethernet cable to the 10 GbE port and replace the port cover. Return to the appropriate instructions. M/N: UAP-XG 802.3bt PoE FCC ID: SWX-UAPXG IC: 6545A-UAPXG Contains FCC ID: SWX-M442G Contains IC: 6545A-M442G Contains FCC ID: SWX-M445GL Contains IC: 6545A-M445GL Contains FCC ID: SWX-M445GH Contains IC: 6545A-M445GH

Powering the UniFi AP Use an 802.3bt PoE switch or a 50V, 1.2A PoE adapter for power. IMPORTANT: Using the 10 GbE port requires enabling flow control on the upstream switch port’s configuration for maximum performance. Connecting to an 802.3bt PoE Switch Connect the Ethernet cable from the UAP-XG directly to a PoE port on the switch. 802.3bt PoE Switch

Connecting to the PoE Adapter Note: The Gigabit PoE adapter and Power Cord are only included with the single-pack of the UAP-XG. 1. Connect the Ethernet cable from the UAP‑XG to the adapter’s POE port. 2. Connect an Ethernet cable from your LAN to the adapter’s LAN port. 3. Connect the Power Cord to the adapter’s power port. Connect the other end of the Power Cord to a power outlet.

Software Installation Download and install the latest version of the UniFi Controller software. Launch it and follow the on-screen instructions. The software and step-by-step instructions in the User Guide are available at: www.ubnt.com/download/unifi After you have installed the software and run the UniFi Installation Wizard, a login screen will appear for the UniFi Controller management interface. Enter the Admin Name and Password that you created and click Log In. You can manage your wireless network and view network statistics using the UniFi Controller management interface. For information on configuring and using the UniFi Controller software, refer to the User Guide. Mobile App Installation Ubiquiti Networks also offers the UniFi mobile app, which is available from the App Store® (iOS) or Google Play™ Store (Android). You can use it to provision a UniFi AP for basic functionality without configuring a UniFi Controller. It also allows seamless provisioning of APs for remote controllers (controllers not on the same Layer 2 network) and easy access to local controllers and those monitored on unifi.ubnt.com

Specifications UAP-XG Dimensions 228 x 228 x 50 mm (8.98 x 8.98 x 1.97") Weight without Mount 1300 g (2.87 lb) Networking Interface (1) 10/100/1000 RJ45 Ethernet Port (1) 1/10 Gbps ICM Ethernet Port Buttons Reset Power Method PoE 802.3bt Power Supply 50VDC, 1.2A Gigabit PoE Adapter Max. Power Consumption 31W Supported Voltage Range 44-57VDC Operating Frequency 2.4 GHz 5 GHz Max. TX Power 2.4 GHz 25 dBm 5 GHz 25 dBm MIMO 2.4 GHz 4x4 5 GHz 4x4 Radio Rates 2.4 GHz 800 Mbps 5 GHz 1.7 Gbps Antenna Integrated Internal Antenna Antenna Gain 2.4 GHz 6 dBi 5 GHz 8 dBi Wi-Fi Standards 802.11 a/b/g/n/ac/ac-wave2 Wireless Security WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) Mounting Wall/Ceiling/Junction Box (Kits Included) Operating Temperature -10 to 60° C (14 to 140° F) Operating Humidity 5 to 95% Noncondensing Certifications CE, FCC, IC


Document Created: 2019-03-23 18:47:15
Document Modified: 2019-03-23 18:47:15
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC