SWX-UAPHDNANO

FCC ID

Equipment: UniFi Access Point

Ubiquiti Networks, Inc. -UAPHDNANO

685 Third Avenue, 27th Floor, New York, NY 10017 United States

Application
Frequency Range
Final Action Date
Granted
Rr40s2ciSmCBrIlZz21nhg==
5180.0-5240.0
2018-02-09
APPROVED
Rr40s2ciSmCBrIlZz21nhg==
5260.0-5320.0
2018-02-09
APPROVED
Rr40s2ciSmCBrIlZz21nhg==
5500.0-5720.0
2018-02-09
APPROVED
Rr40s2ciSmCBrIlZz21nhg==
5745.0-5825.0
2018-02-09
APPROVED
+C6YU3cjWbr9teJ7F9js1w==
5180.0-5240.0
2017-12-04
APPROVED
+C6YU3cjWbr9teJ7F9js1w==
5745.0-5825.0
2017-12-04
APPROVED
NRNAiWV42QpyT/g6RMmNbw==
2412.0-2462.0
2017-12-04
APPROVED
File NameDocument TypeDateDirect
Test Report NII Part 3Test Report 2018-02-09 00:00:00 pdf
Test Report NII Part 2Test Report 2018-02-09 00:00:00 pdf
Test Report NII Part 1Test Report 2018-02-09 00:00:00 pdf
MPERF Exposure Info 2018-02-09 00:00:00 pdf
Test Report DFSTest Report 2018-02-09 00:00:00 pdf
POACover Letter(s) 2018-02-09 00:00:00 pdf
Confidentiality Request STCCover Letter(s) 2018-02-09 00:00:00 pdf
C2PC LetterCover Letter(s) 2018-02-09 00:00:00 pdf
Test Setup Photos NIITest Setup Photos 2018-08-08 00:00:00 pdf
Test Setup Photos DFSTest Setup Photos 2018-08-08 00:00:00 pdf
Test Report DTSTest Report 2017-12-04 00:00:00 pdf
LabelID Label/Location Info 2017-12-04 00:00:00 pdf
Confidentiality Letter STCCover Letter(s) 2017-12-04 00:00:00 pdf
Test Setup Photos DTSTest Setup Photos 2018-06-02 00:00:00 pdf
QSG User ManualUsers Manual 2018-06-02 00:00:00 pdf
Internal PhotosInternal Photos 2018-06-02 00:00:00 pdf
External PhotosExternal Photos 2018-06-02 00:00:00 pdf
Test ReportTest Report 2017-12-04 00:00:00 pdf
MPE ReportRF Exposure Info 2017-12-04 00:00:00 pdf
Confidentiality Request LetterCover Letter(s) 2017-12-04 00:00:00 pdf
SchematicsSchematics N/A
Block DiagramBlock Diagram N/A
Operational DescriptionOperational Description N/A
Operational Description Software SecuritySDR Software/Security Inf N/A
Software Security OpDes control pro.SDR Software/Security Inf N/A

Application Details:

EquipmentUniFi Access Point
FRN0012268215
Grantee CodeSWX
Product Code-UAPHDNANO
Applicant BusinessUbiquiti Networks, Inc.
Business Address685 Third Avenue, 27th Floor , New York,New York United States 10017
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantMark Feil – Compliance Manager
Applicant Phone
Applicant Fax408-904-5255
Applicant Email[email protected]
Applicant MailStop
Test FirmSPORTON International Inc.
Test Firm ContactAlex Chen
Test Firm Phone 650
Test Firm Fax886-3-327-0973
Test Firm Email[email protected]
Certified ByLeo Huang – Manager
Comment [+C6YU3cjWbr9teJ7F9js1w==]: Power listed is combined maximum conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes.
Comment [NRNAiWV42QpyT/g6RMmNbw==]: Power listed is combined maximum conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 and 40 MHz bandwidth modes.
Comment [Rr40s2ciSmCBrIlZz21nhg==]: Power listed is combined maximum conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. All Ethernet cabling runs must use CAT5 (or above). It is the professional installer’s responsibility to follow local country regulations, including operation within legal frequency channels, output power, indoor cabling requirements, and Dynamic Frequency Selection (DFS) requirements. This device has 20, 40, and 80 MHz bandwidth modes.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC