5GHz Declaration Letter

FCC ID: SWX-R2ACN

Cover Letter(s)

Download: PDF
FCCID_3529605

                                 Ubiquiti Networks, Inc.
                    685 Third Avenue, 27th Floor, New York 10017, United States
                               Tel: 408—942—3084 ; Fax: 408—904—5255



We have declared below featured for device identified as
FCC ID: SWX—R2ACN
IC: 6545A—R2ACN

(1) DFS Device ——           [L] Master, [] Client with Radar detection capability ,
                            [—] Ciient without radar detection capability, ) N/A

{2) Scanning plan & capability:


      Frequency            .
                     Scanning      Ad Hoo         Access
                                                    J            Wt
                                                                Direct   Wt
                                                                         DMeCt    moamioring   MESH     Bridgo
     Band (MHz)        Plan         Mode         / £D|Spu|      Group    Group                             9
                                                                Owner    Client
     PaT2— 2262       _|__Adve       No            Yes           No:       No:        No        No       No
     5745— 5825|      Adive          No:           Yes           No:       No:        No:       No       No:
(3) Country code selection capability to end user— [_] Yes , J No
    If yes, pis explain how it was implemented : (pls also help to provide detail of options for each
    country selection}


    Meet Part 15.202 requirement           — [] Yes , [] No ,
€




    * A master device is delined as a device operaling in a mode in which it has the capability to
    transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate
    a network by sending enabling signals to other devices
    * A client device is delined as a device operaling in a mode in which the transmissions of the
    device are under control of the master. A device in client mode is not able to initiate a network.

    For client devices that have software configuration control to operate in different modes {active
a




    scanning in some and passive scanning in others} in different bands (devices with multiple
    equipment classes or those that operate on non—DFS frequencies) or modular devices which
    configure the modes of operations through software, the application must provide software and
    operations description on how the software and / or hardware is implemented to ensure that proper
    operations modes can not be modified by end user or an installer.
    fi Apply , [] No Apply ,       (If apply , pls help to provide explanation on it was implement , and
    how software was controlled)




ol u. «/
Contact Person: Mark Feil
E—mail: compliance@ubnt.com



Document Created: 2019-07-02 11:32:37
Document Modified: 2019-07-02 11:32:37

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC