5GHz Declaration Letter

FCC ID: SWX-PS5AC

Cover Letter(s)

Download: PDF
FCCID_3335867

                                Ubiquiti Networks, Inc.
                   2580 Orchard Parkway, San Jose, California 95131, United States
                              Tel: 408-942-3084 ; Fax: 408-904-5255


We have declared below featured for device identified as
FCC ID: SWX-PS5AC

(1) DFS Device --               Master,       Client with Radar detection capability ,
                                Client without radar detection capability,     N/A

(2) Scanning plan & capability:

                                                             WiFi       WiFi
                                                Access
     Frequency       Scanning       Ad Hoc                  Direct      Direct
                                                 point
     Band (MHz)        Plan          Mode                   Group       Group
                                               / Hotspot
                                                            Owner       Client
     2412 – 2462      Active          No          Yes        No          No
     5180 – 5240      Active          No          Yes        No          No
     5745 – 5825      Active          No          Yes        No          No

(3) Country code selection capability to end user-       Yes ,     No
    If yes, pls explain how it was implemented : (pls also help to provide detail of options for each
    country selection)


(4) Meet Part 15.202 requirement -          Yes ,     No ,
    * A master device is defined as a device operating in a mode in which it has the capability to
    transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate
    a network by sending enabling signals to other devices
    * A client device is defined as a device operating in a mode in which the transmissions of the
    device are under control of the master. A device in client mode is not able to initiate a network.

(5) For client devices that have software configuration control to operate in different modes (active
    scanning in some and passive scanning in others) in different bands (devices with multiple
    equipment classes or those that operate on non-DFS frequencies) or modular devices which
    configure the modes of operations through software, the application must provide software and
    operations description on how the software and / or hardware is implemented to ensure that proper
    operations modes can not be modified by end user or an installer.
        Apply ,     No Apply ,    (If apply , pls help to provide explanation on it was implement , and
    how software was controlled)




_________________________________
Michael Taylor
compliance@ubnt.com



Document Created: 2017-12-27 18:02:09
Document Modified: 2017-12-27 18:02:09

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC