User Manual

FCC ID: SWX-NBEAC

Users Manual

Download: PDF
FCCID_3117369

Introduction Installation Requirements Reset Button To reset to factory defaults, press and hold the Hardware Installation 3. Wrap the Metal Strap around the pole. Use a 7 mm socket Reset button for more than 10 seconds while the NanoBeam wrench to turn the screw clockwise and securely fasten the Thank you for purchasing the Ubiquiti Networks® The NanoBeam can be mounted on a pole or to a wall. A Metal is already powered on. Alternatively, the NanoBeam may be The NanoBeam can be mounted on a pole or to a wall. Perform clamp to the pole. NanoBeam® ac. This Quick Start Guide is designed to guide Strap (included) is used for pole-mounting. For wall-mounting, reset remotely via a Reset button located on the bottom of the the steps for the appropriate installation: you through installation and also includes warranty terms. a suitable fastener such as a screw or bolt (not included) is Gigabit PoE Adapter. required. Pole-Mount Package Contents Ethernet Port This Gigabit Ethernet port is used to connect 1. Insert the Ball Joint Mount into the Lock Ring with the • Pole-mounting: 7 mm socket wrench or screwdriver the power and should be connected to the LAN and DHCP threads of the Lock Ring facing the ball joint. • Wall-mounting: wall fastener (not included) server. Power can be provided by any of the following: • Shielded Category 5 (or above) cabling should be used for • Gigabit PoE Adapter (included) all wired Ethernet connections and should be grounded • Ubiquiti Networks TOUGHSwitch™ PoE through the AC ground of the PoE. • Ubiquiti Networks EdgeSwitch™ or EdgeRouter™ PoE We recommend that you protect your networks from the most brutal environments and devastating ESD attacks with LEDs industrial-grade shielded Ethernet cable, TOUGHCable from NanoBeam ac Ball Joint Lock Ring Ubiquiti Networks. Mount For more details, visit www.ubnt.com/toughcable 4. Attach the NanoBeam to the Ball Joint Mount and turn the Lock Ring to secure it. Keep the Lock Ring loose enough to Hardware Overview Power The Power LED will light blue when the allow the NanoBeam to pivot for aiming. device is connected to a power source. LEDs Ethernet The Ethernet LED will light steady blue when an active Ethernet connection is made and 5 GHz, 19 dBi airMAX® ac CPE Model: NBE-5AC-19 Metal Strap Gigabit PoE (24V, 0.5A) Power Cord Quick Start flash when there is activity. with Mounting Bracket Guide 2. Open the Metal Strap and feed it through the base of the Signal The default values are shown below: Ball Joint Mount. LED will light blue when the wireless signal TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet strength is equal to or above -94 dBm. cable and earth grounding must be used as conditions of product warranty. TOUGHCable™ is designed for outdoor installations. It is the customer’s responsibility to follow local country LED will light blue when the wireless signal regulations, including operation within legal frequency channels, output power, and Dynamic Frequency Selection (DFS) requirements. strength is equal to or above -80 dBm. LED will light blue when the wireless signal strength is equal to or above -73 dBm. LED will light blue when the wireless signal strength is equal to or above -65 dBm. Reset Button Ethernet Port 5 GHz, 19 dBi (10/100/1000 Mbps) airMAX® ac CPE *640-00127-08* Model: NBE-5AC-19 640-00127-08 Wall-Mount 4. If you are using the optional NanoBeam Wall Mount Kit, 5. Attach the NanoBeam to the mount Ball Joint Mount and Connecting to the PoE Adapter Connecting Power over Ethernet Accessing airOS then skip to step b. turn the Lock Ring to secure it. Keep the Lock Ring loose The NanoBeam must be mounted directly to a wood stud 1. Remove the port cover by pressing down the center of the 1. Connect the Ethernet cable from the NanoBeam’s Ethernet Verify connectivity in the airOS® Configuration Interface. a. To attach the Ball Joint Mount to the wall, insert a enough to allow the NanoBeam to pivot for aiming. or other structurally stable surface to avoid damage to the cover and sliding the cover out. port to the adapter’s POE port. fastener (not included) through the center of the ball 1. Make sure that your host system is connected via Ethernet mounting hole when you adjust the aim. 2. Connect an Ethernet cable from your LAN to the adapter’s joint, and into the wall. Securely tighten the fastener. to the NanoBeam. LAN port. Optional Accessory Proceed to step 5. 2. Configure the Ethernet adapter on your host system with a 3. Connect the Power Cord to the adapter’s power port. static IP address on the 192.168.1.x subnet. To enhance stability, you can use the NanoBeam Wall Mount Connect the other end of the Power Cord to a power outlet. Kit, model NBE-WMK (sold separately). 3. Launch your web browser and type https://192.168.1.20 in the address field. Press enter (PC) or return (Mac). 4. The login screen will appear. Enter ubnt in the Username and Password fields. Select your Country and Language. Mounting the PoE Adapter (Optional) You must agree to the Terms of Use to use the product. Note: Center screw included. Two optional screws (not Click Login. included) provide additional stability. 1. Remove the PoE Mounting Bracket from the adapter, place Installation Instructions the bracket at the desired location, and mark the two holes. b. To attach the Ball Joint Mount to the wall, insert the Wall Aiming 2. Connect an Ethernet cable to the Ethernet port. Mount Kit screw through the center of the ball joint, 2. Pre-drill the holes if necessary, and secure the bracket 1. Mark the desired location of the mounting point. 1. Aim the front of the NanoBeam towards the other end of using two fasteners (not included). through the Wall Mount Kit plate, and into the wall. 2. If needed, drill a pilot hole for the fastener (not included). Securely tighten the screw. the wireless link, while using the bubble level to ensure 3. Align the adapter’s slots with the tabs of the PoE Mounting 3. Insert the Ball Joint Mount into the Lock Ring with the level alignment. Bracket, and then slide the adapter down. threads of the Lock Ring facing the ball joint. 2. Hand-tighten the Lock Ring to lock the aim. Note: Do not use a tool to tighten the Lock Ring. Tighten the Lock Ring by hand only. Note: For the Country setting, U.S. product versions are restricted to a choice of Canada, Puerto Rico, or the U.S. to ensure compliance with FCC/IC regulations. The airOS Configuration Interface will appear, allowing you to customize your settings as needed. For additional details on the airOS Configuration Interface, refer to the User Guide 3. Replace the port cover. available at documentation.ubnt.com/airmax NanoBeam_NBE-5AC-19_QSG_V08_06-04-15_Foldout.indd 1 6/4/15 2:22 PM

Installer Compliance Responsibility Specifications Safety Notices Limited Warranty Disclaimer Note 1. Read, follow, and keep these instructions. UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the EXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI Some countries, states and provinces do not allow exclusions of implied Devices must be professionally installed and it is the NBE-5AC-19 2. Heed all warnings. product(s) furnished hereunder (the “Product(s)”) shall be free from defects NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA, warranties or conditions, so the above exclusion may not apply to you. professional installer's responsibility to make sure the device is Dimensions (Mount Included) 189 x 189 x 125 mm in material and workmanship for a period of one (1) year from the date SERVICE, SOFTWARE AND HARDWARE PROVIDERS HEREBY DISCLAIM You may have other rights that vary from country to country, state to operated within local country regulatory requirements. 3. Only use attachments/accessories specified by the manufacturer. AND MAKE NO OTHER REPRESENTATION OR WARRANTY OF ANY KIND, state, or province to province. Some countries, states and provinces do not (7.44 x 7.44 x 4.92") of shipment by UBIQUITI NETWORKS under normal use and operation. WARNING: Do not use this product in location that can UBIQUITI NETWORKS’ sole and exclusive obligation and liability under EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, allow the exclusion or limitation of liability for incidental or consequential Weight (Mount Included) 530 g REPRESENTATIONS, GUARANTEES, OR WARRANTIES OF MERCHANTABILITY, damages, so the above limitation may not apply to you. EXCEPT TO be submerged by water. the foregoing warranty shall be for UBIQUITI NETWORKS, at its discretion, (1.17 lb) ACCURACY, QUALITY OF SERVICE OR RESULTS, AVAILABILITY, THE EXTENT ALLOWED BY LOCAL LAW, THESE WARRANTY TERMS DO to repair or replace any Product that fails to conform to the above Operating Frequency Worldwide: 5150 - 5875 MHz WARNING: Avoid using this product during an electrical warranty during the above warranty period. The expense of removal and SATISFACTORY QUALITY, LACK OF VIRUSES, QUIET ENJOYMENT, FITNESS NOT EXCLUDE, RESTRICT OR MODIFY, AND ARE IN ADDITION TO, THE USA: 5725 - 5850 MHz storm. There may be a remote risk of electric shock from reinstallation of any Product is not included in this warranty. The warranty FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT AND ANY MANDATORY STATUTORY RIGHTS APPLICABLE TO THE LICENSE OF ANY lightning. period of any repaired or replaced Product shall not extend beyond its WARRANTIES ARISING FROM ANY COURSE OF DEALING, USAGE OR SOFTWARE (EMBEDDED IN THE PRODUCT) TO YOU. The United Nations Gain 19 dBi TRADE PRACTICE IN CONNECTION WITH SUCH PRODUCTS AND SERVICES. Convention on Contracts for the International Sale of Goods shall not apply original term. BUYER ACKNOWLEDGES THAT NEITHER UBIQUITI NETWORKS NOR to any transactions regarding the sale of the Products. Networking Interface (1) 10/100/1000 Ethernet Port Electrical Safety Information Enclosure Outdoor UV Stabilized Plastic Warranty Conditions ITS THIRD PARTY PROVIDERS CONTROL BUYER’S EQUIPMENT OR THE 1. Compliance is required with respect to voltage, frequency, and current The above warranty does not apply if the Product: TRANSFER OF DATA OVER COMMUNICATIONS FACILITIES, INCLUDING Compliance Max. Power Consumption 8W requirements indicated on the manufacturer’s label. Connection to a THE INTERNET, AND THAT THE PRODUCTS AND SERVICES MAY BE different power source than those specified may result in improper (I) has been modified and/or altered, or an addition made thereto, SUBJECT TO LIMITATIONS, INTERRUPTIONS, DELAYS, CANCELLATIONS Power Supply 24V, 0.5A Gigabit PoE Adapter (Included) operation, damage to the equipment or pose a fire hazard if the except by Ubiquiti Networks, or Ubiquiti Networks’ authorized AND OTHER PROBLEMS INHERENT IN THE USE OF COMMUNICATIONS FCC Power Method Passive PoE (Pairs 4, 5+; 7, 8 Return) limitations are not followed. representatives, or as approved by Ubiquiti Networks in writing; FACILITIES. UBIQUITI NETWORKS, ITS AFFILIATES AND ITS AND THEIR THIRD Changes or modifications not expressly approved by the party responsible 2. There are no operator serviceable parts inside this equipment. Service (II) has been painted, rebranded or physically modified in any way; PARTY PROVIDERS ARE NOT RESPONSIBLE FOR ANY INTERRUPTIONS, for compliance could void the user’s authority to operate the equipment. Wind Loading 45.4 N @ 200 km/h should be provided only by a qualified service technician. DELAYS, CANCELLATIONS, DELIVERY FAILURES, DATA LOSS, CONTENT This device complies with Part 15 of the FCC Rules. Operation is subject to The Output Power field is provided to the professional installer (10.2 lbf @ 125 mph) (III) has been damaged due to errors or defects in cabling; CORRUPTION, PACKET LOSS, OR OTHER DAMAGE RESULTING FROM ANY the following two conditions. 3. This equipment is provided with a detachable power cord which has (IV) has been subjected to misuse, abuse, negligence, abnormal to assist in meeting regulatory requirements. Wind Survivability 200 km/h OF THE FOREGOING. In addition, UBIQUITI NETWORKS does not warrant 1. This device may not cause harmful interference, and an integral safety ground wire intended for connection to a grounded physical, electromagnetic or electrical stress, including lightning that the operation of the Products will be error-free or that operation will (125 mph) safety outlet. strikes, or accident; be uninterrupted. In no event shall UBIQUITI NETWORKS be responsible 2. This device must accept any interference received, including Certiications CE, FCC, IC a. Do not substitute the power cord with one that is not the provided interference that may cause undesired operation. (V) has been damaged or impaired as a result of using third party for damages or claims of any nature or description relating to system Mounting Pole-Mount (Kit Included) approved type. Never use an adapter plug to connect to a 2-wire firmware; performance, including coverage, buyer’s selection of products (including This equipment has been tested and found to comply with the limits for a Wall-Mount (Not Included) outlet as this will defeat the continuity of the grounding wire. the Products) for buyer’s application and/or failure of products (including Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are (VI) has no original Ubiquiti MAC label, or is missing any other original b. The equipment requires the use of the ground wire as a part of the Ubiquiti label(s); or the Products) to meet government or regulatory requirements. designed to provide reasonable protection against harmful interference in ESD/EMP Protection ± 24kV Contact/Air safety certification, modification or misuse can provide a shock a residential installation. This equipment generates, uses and can radiate Operating Temperature -40 to 80° C hazard that can result in serious injury or death. (VII) has not been received by Ubiquiti within 30 days of issuance of Limitation of Liability radio frequency energy and, if not installed and used in accordance with (-40 to 176° F) the RMA. c. Contact a qualified electrician or the manufacturer if there the instructions, may cause harmful interference to radio communications. EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL In addition, the above warranty shall apply only if: the product has been However, there is no guarantee that interference will not occur in a Operating Humidity 5 to 95% Noncondensing are questions about the installation prior to connecting the UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE FOR properly installed and used at all times in accordance, and in all material particular installation. If this equipment does cause harmful interference Salt Fog Test IEC 68-2-11 (ASTM B117), equipment. DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES respects, with the applicable Product documentation; all Ethernet cabling to radio or television reception, which can be determined by turning Equivalent: MIL-STD-810 G Method 509.5 d. Protective earthing is provided by Listed AC adapter. Building (INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS), ARISING runs use CAT5 (or above), and for outdoor installations, shielded Ethernet the equipment off and on, the user is encouraged to try to correct the installation shall provide appropriate short-circuit backup OUT OF THE USE, INABILITY TO USE, OR THE RESULTS OF USE OF THE Vibration Test IEC 68-2-6 cabling is used, and for indoor installations, indoor cabling requirements interference by one or more of the following measures: protection. PRODUCT, WHETHER BASED IN WARRANTY, CONTRACT, TORT OR OTHER are followed. LEGAL THEORY, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF • Reorient or relocate the receiving antenna. Temperature Shock Test IEC 68-2-14 e. Protective bonding must be installed in accordance with local SUCH DAMAGES. UV Test IEC 68-2-5 at 40° C (104° F) national wiring rules and regulations. Returns • Increase the separation between the equipment and receiver. Equivalent: ETS 300 019-1-4 • Connect the equipment into an outlet on a circuit different from that to No Products will be accepted for replacement or repair without obtaining which the receiver is connected. Wind-Driven Rain Test ETS 300 019-1-4 a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS during the warranty period, and the Products being received at UBIQUITI • Consult the dealer or an experienced radio/TV technician for help. Equivalent: MIL-STD-810 G Method 506.5 NETWORKS’ facility freight prepaid in accordance with the RMA process of Operations of this equipment in a residential area is likely to cause UBIQUITI NETWORKS. Products returned without an RMA number will not harmful interference in which case the user will be required to correct the be processed and will be returned freight collect or subject to disposal. interference at his own expense. Information on the RMA process and obtaining an RMA number can be found at: www.ubnt.com/support/warranty. This radio transmitter (FCC: SWX-NBEAC) has been approved by FCC to operate with the antenna types listed below with the maximum Cet émetteur radio (IC: 6545A-NBEAC) a été approuvée par Industrie Canada pour l’exploitation avec l’antenne types énumérés ci-dessous avec RoHS/WEEE Compliance Statement Español Declaration of Conformity Malti Hawnhekk, UBIQUITI NETWORKS, tiddikjara li dan il-mezz [Maltese] UBIQUITI NETWORKS huwa konformi mar-rekwiżiti essenzjali u permissible gain and required antenna impedance for each antenna type le gain maximal admissible et requis l’impédance de l’antenne pour chaque La Directiva 2002/96/CE de la UE exige que los equipos que lleven este dispożizzjonijiet rilevanti oħrajn ta ‘Direttiva 1999/5/EC. indicated. Antenna types not included in this list, having a gain greater type d’antenne indiqué. Types d’antenne non inclus dans cette liste, ayant símbolo en el propio aparato y/o en su embalaje no deben eliminarse Česky UBIQUITI NETWORKS tímto prohlašuje, že toto UBIQUITI junto con otros residuos urbanos no seleccionados. El símbolo indica [Czech] NETWORKS zařízení, je ve shod se základními požadavky a dalšími Norsk Herved UBIQUITI NETWORKS, erklærer at denne UBIQUITI than the maximum gain indicated for that type, are strictly prohibited for un gain supérieur au gain maximal indiqué pour ce type, sont strictement que el producto en cuestión debe separarse de los residuos domésticos příslušnými ustanoveními směrnice 1999/5/ES. [Norwegian] NETWORKS enheten, er i samsvar med de grunnleggende kravene use with this device. interdits pour une utilisation avec cet appareil. Immédiatement suite à la og andre relevante bestemmelser i direktiv 1999/5/EF. remarque, le fabricant doit fournir une liste de tous les types d’antenne convencionales con vistas a su eliminación. Es responsabilidad suya Dansk Hermed, UBIQUITI NETWORKS, erklærer at denne UBIQUITI • Integrated antenna, gain: 17.6 or 19 dBi approuvé pour une utilisation avec l’émetteur, ce qui indique le gain English desechar este y cualesquiera otros aparatos eléctricos y electrónicos a [Danish] NETWORKS enhed, er i overensstemmelse med de væsentlige krav Slovensky Týmto UBIQUITI NETWORKS, prehlasuje, že toto UBIQUITI través de los puntos de recogida que ponen a su disposición el gobierno y og øvrige relevante krav i direktiv 1999/5/EF. [Slovak] NETWORKS zariadenie, je v súlade so základnými požiadavkami a Industry Canada maximal d’antenne permis (en dBi) et requis d’impédance pour chacun. European Directive 2002/96/EC requires that the equipment bearing las autoridades locales. Al desechar y reciclar correctamente estos aparatos ďalšími relevantnými ustanoveniami smernice 1999/5/ES. • Antenne intégré, 17.6 ou 19 dBi Nederlands Hierbij verklaart UBIQUITI NETWORKS, dat deze UBIQUITI this symbol on the product and/or its packaging must not be disposed estará contribuyendo a evitar posibles consecuencias negativas para el NETWORKS apparaat, in overeenstemming is met de essentiële CAN ICES-3(B)/NMB-3(B) [Dutch] Svenska Härmed UBIQUITI NETWORKS, intygar att denna UBIQUITI of with unsorted municipal waste. The symbol indicates that this medio ambiente y la salud de las personas. Si desea obtener información eisen en de andere relevante bepalingen van richtlijn 1999/5/EC. RF Exposure Warning product should be disposed of separately from regular household waste más detallada sobre la eliminación segura de su aparato usado, consulte a [Swedish] NETWORKS enhet är i överensstämmelse med de väsentliga To reduce potential radio interference to other users, the antenna egenskapskrav och övriga relevanta bestämmelser som framgår av streams. It is your responsibility to dispose of this and other electric and las autoridades locales, al servicio de recogida y eliminación de residuos de English Hereby, UBIQUITI NETWORKS, declares that this UBIQUITI type and its gain should be so chosen that the equivalent isotropically The antennas used for this transmitter must be installed to provide a NETWORKS device, is in compliance with the essential requirements direktiv 1999/5/EG. radiated power (e.i.r.p.) is not more than that permitted for successful separation distance of at least 48 cm from all persons and must not be electronic equipment via designated collection facilities appointed by the su zona o pregunte en la tienda donde adquirió el producto. and other relevant provisions of Directive 1999/5/EC. Español Por medio de la presente UBIQUITI NETWORKS declara que este communication. located or operating in conjunction with any other antenna or transmitter. government or local authorities. Correct disposal and recycling will help dispositivo UBIQUITI NETWORKS, cumple con los requisitos Français Eesti Käesolevaga UBIQUITI NETWORKS kinnitab, et antud UBIQUITI [Spanish] prevent potential negative consequences to the environment and human esenciales y cualesquiera otras disposiciones aplicables o exigibles This device complies with Industry Canada licence-exempt RSS standard(s). Les antennes utilisées pour ce transmetteur doivent être installé en NETWORKS seade, on vastavus olulistele nõuetele ja teistele health. For more detailed information about the disposal of your old [Estonian] de la Directiva 1999/5/CE. Operation is subject to the following two conditions: considérant une distance de séparation de toute personnes d’au moins La directive européenne 2002/96/CE exige que l’équipement sur lequel asjakohastele sätetele direktiivi 1999/5/EÜ. equipment, please contact your local authorities, waste disposal service, or 1. This device may not cause interference, and 48 cm et ne doivent pas être localisé ou utilisé en conflit avec tout autre est apposé ce symbole sur le produit et/ou son emballage ne soit pas jeté Polski Niniejszym, Ubiquiti Networks, oświadcza, że urządzenie UBIQUITI the shop where you purchased the product. Suomi Täten UBIQUITI NETWORKS vakuuttaa, että tämä UBIQUITI antenne ou transmetteur. avec les autres ordures ménagères. Ce symbole indique que le produit [Polish] NETWORKS, jest zgodny z zasadniczymi wymaganiami oraz 2. This device must accept any interference, including interference that [Finnish] NETWORKS laite, on yhdenmukainen olennaisten vaatimusten ja Deutsch doit être éliminé dans un circuit distinct de celui pour les déchets des muiden sitä koskevien direktiivin 1999/5/EY. pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC. may cause undesired operation of the device. CE Marking ménages. Il est de votre responsabilité de jeter ce matériel ainsi que tout Português UBIQUITI NETWORKS declara que este dispositivo UBIQUITI This radio transmitter (IC: 6545A-NBEAC) has been approved by Industry Die Europäische Richtlinie 2002/96/EC verlangt, dass technische autre matériel électrique ou électronique par les moyens de collecte Français Par la présente UBIQUITI NETWORKS déclare que l’appareil NETWORKS, está conforme com os requisitos essenciais e outras CE marking on this product represents the product is in compliance with all UBIQUITI NETWORKS, est conforme aux exigences essentielles et [Portuguese] Canada to operate with the antenna types listed below with the maximum Ausrüstung, die direkt am Gerät und/oder an der Verpackung mit diesem indiqués par le gouvernement et les pouvoirs publics des collectivités [French] disposições da Directiva 1999/5/CE. directives that are applicable to it. Symbol versehen ist, nicht zusammen mit unsortiertem Gemeindeabfall aux autres dispositions pertinentes de la directive 1999/5/CE. permissible gain and required antenna impedance for each antenna type territoriales. L’élimination et le recyclage en bonne et due forme ont pour entsorgt werden darf. Das Symbol weist darauf hin, dass das Produkt Română Prin prezenta, UBIQUITI NETWORKS declară că acest dispozitiv indicated. Antenna types not included in this list, having a gain greater Alert Sign (!) Follows CE Marking but de lutter contre l’impact néfaste potentiel de ce type de produits Deutsch Hiermit erklärt UBIQUITI NETWORKS, dass sich dieses UBIQUITI von regulärem Haushaltmüll getrennt entsorgt werden sollte. Es [Romanian] UBIQUITI NETWORKS este în conformitate cu cerințele esențiale și than the maximum gain indicated for that type, are strictly prohibited for sur l’environnement et la santé publique. Pour plus d’informations sur le [German] NETWORKS Gerät, in Übereinstimmung mit den grundlegenden alte prevederi relevante ale Directivei 1999/5/CE. use with this device. Alert sign must be indicated if a restriction on use applied to the product liegt in Ihrer Verantwortung, dieses Gerät und andere elektrische mode d’élimination de votre ancien équipement, veuillez prendre contact Anforderungen und den anderen relevanten Vorschriften der and it must follow the CE marking. und elektronische Geräte über die dafür zuständigen und von der avec les pouvoirs publics locaux, le service de traitement des déchets, ou Richtlinie 1999/5/EG befindet. • Integrated antenna, gain: 17.6 or 19 dBi Regierung oder örtlichen Behörden dazu bestimmten Sammelstellen zu l’endroit où vous avez acheté le produit. Ελληνική Δια του παρόντος, UBIQUITI NETWORKS, δηλώνει ότι αυτή η Online Resources CAN ICES-3(B)/NMB-3(B) entsorgen. Ordnungsgemäßes Entsorgen und Recyceln trägt dazu bei, [Greek] συσκευή UBIQUITI NETWORKS, είναι σε συμμόρφωση με τις potentielle negative Folgen für Umwelt und die menschliche Gesundheit Italiano βασικές απαιτήσεις και τις λοιπές σχετικές διατάξεις της οδηγίας Support support.ubnt.com Pour réduire le risque d’interférence aux autres utilisateurs, le type zu vermeiden. Wenn Sie weitere Informationen zur Entsorgung Ihrer 1995/5/ΕΚ. La direttiva europea 2002/96/EC richiede che le apparecchiature Community community.ubnt.com d’antenne et son gain doivent être choisies de façon que la puissance Altgeräte benötigen, wenden Sie sich bitte an die örtlichen Behörden oder isotrope rayonnée équivalente (PIRE) ne dépasse pas ce qui est nécessaire contrassegnate con questo simbolo sul prodotto e/o sull’imballaggio non Magyar Ezennel UBIQUITI NETWORKS kijelenti, hogy ez a UBIQUITI Downloads downloads.ubnt.com städtischen Entsorgungsdienste oder an den Händler, bei dem Sie das NETWORKS készülék megfelel az alapvető követelményeknek és pour une communication réussie. siano smaltite insieme ai rifiuti urbani non differenziati. Il simbolo indica [Hungarian] Produkt erworben haben. más vonatkozó 1999/5/EK irányelv rendelkezéseit. che questo prodotto non deve essere smaltito insieme ai normali rifiuti Cet appareil est conforme à la norme RSS Industrie Canada exempts de domestici. È responsabilità del proprietario smaltire sia questi prodotti sia Íslenska Hér, UBIQUITI NETWORKS, því yfir að þetta UBIQUITI NETWORKS licence norme(s). Son fonctionnement est soumis aux deux conditions le altre apparecchiature elettriche ed elettroniche mediante le specifiche [Icelandic] tæki er í samræmi við grunnkröfur og önnur viðeigandi ákvæði suivantes: strutture di raccolta indicate dal governo o dagli enti pubblici locali. Il tilskipun 1999/5/EC. 1. Cet appareil ne peut pas provoquer d’interférences et corretto smaltimento ed il riciclaggio aiuteranno a prevenire conseguenze Italiano Con la presente, UBIQUITI NETWORKS, dichiara che questo 2. Cet appareil doit accepter toute interférence, y compris les potenzialmente negative per l’ambiente e per la salute dell’essere umano. [Italian] dispositivo UBIQUITI NETWORKS, è conforme ai requisiti essenziali interférences qui peuvent causer un mauvais fonctionnement du Per ricevere informazioni più dettagliate circa lo smaltimento delle vecchie ed alle altre disposizioni pertinenti della direttiva 1999/5/CE. dispositif. apparecchiature in Vostro possesso, Vi invitiamo a contattare gli enti pubblici di competenza, il servizio di smaltimento rifiuti o il negozio nel Latviski Ar šo, UBIQUITI NETWORKS, deklarē, ka UBIQUITI NETWORKS [Latvian] ierīce, ir saskaņā ar būtiskajām prasībām un citiem attiecīgiem ©2014-2015 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti quale avete acquistato il prodotto. noteikumiem Direktīvā 1999/5/EK. Networks, the Ubiquiti U logo, the Ubiquiti beam logo, airMAX, airOS, EdgeRouter, EdgeSwitch, NanoBeam, TOUGHCable, and TOUGHSwitch are trademarks or Lietuviškai UBIQUITI NETWORKS deklaruoja, kad šis UBIQUITI NETWORKS registered trademarks of Ubiquiti Networks, Inc. in the United States and in other [Lithuanian] įrenginys atitinka esminius reikalavimus ir kitas 1999/5/EB countries. All other trademarks are the property of their respective owners. JL060415 Direktyvos nuostatas. NanoBeam_NBE-5AC-19_QSG_V08_06-04-15_Foldout.indd 2 6/4/15 2:22 PM


Document Created: 2017-12-13 17:51:08
Document Modified: 2017-12-13 17:51:08
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC