User Manual

FCC ID: SWX-NBE2M13

Users Manual

Download: PDF
FCCID_2704731

Introduction Installation Requirements Reset Button To reset to factory defaults, press and hold the Hardware Installation 3. Wrap the Metal Strap around the pole. Use a 7 mm socket Wall-Mount Reset button for more than 10 seconds while the NanoBeam wrench to turn the screw clockwise and securely fasten the Thank you for purchasing the Ubiquiti Networks® NanoBeam®. The NanoBeam can be mounted on a pole or to a wall. A Metal is already powered on. Alternatively, the NanoBeam may be The NanoBeam can be mounted on a pole or to a wall. Perform clamp to the pole. The NanoBeam must be mounted directly to a wood stud This Quick Start Guide is designed to guide you through Strap (included) is used for pole-mounting. For wall-mounting, reset remotely via a Reset button located on the bottom of the the steps for the appropriate installation: or other structurally stable surface to avoid damage to the the installation, and show you how to access the airOS® a suitable fastener such as a screw or bolt (not included) is PoE Adapter. mounting hole when you adjust the aim. Configuration Interface. This Quick Start Guide also includes required. Pole-Mount the warranty terms and is for use with the NanoBeamM2, Ethernet Port The Ethernet port is used to connect the power Optional Accessory • Pole-mounting: 7 mm socket wrench or screwdriver 1. Insert the Ball Joint Mount into the Lock Ring with the model NBE-M2-13. and should be connected to the LAN and DHCP server. Power threads of the Lock Ring facing the ball joint. To enhance stability, you can use the NanoBeam Wall Mount • Wall-mounting: wall fastener (not included) can be provided by any of the following: Kit, model NBE-WMK (sold separately). Package Contents • Shielded Category 5 (or above) cabling should be used for • PoE Adapter (included) all wired Ethernet connections and should be grounded • Ubiquiti Networks EdgeSwitch™ through the AC ground of the PoE. • Ubiquiti Networks EdgeRouter™ PoE We recommend that you protect your networks from the most brutal environments and devastating ESD attacks with LEDs industrial-grade shielded Ethernet cable, TOUGHCable from Ubiquiti Networks. Note: Center screw included. Two optional screws For more details, visit www.ubnt.com/toughcable (not included) provide additional stability. NanoBeamM2 Ball Joint Lock Ring Hardware Overview Power The Power LED will light blue when the Installation Instructions Mount device is connected to a power source. 4. Attach the NanoBeam to the Ball Joint Mount and turn the 1. Mark the desired location of the mounting point. LEDs Ethernet The Ethernet LED will light steady blue when an active Ethernet connection is made and Lock Ring to secure it. Keep the Lock Ring loose enough to 2. If needed, drill a pilot hole for the fastener (not included). flash when there is activity. allow the NanoBeam to pivot for aiming. 3. Insert the Ball Joint Mount into the Lock Ring with the 2. Open the Metal Strap and feed it through the base of the High-Performance 13 dBi airMAX® CPE Signal The default values are shown below: Ball Joint Mount. threads of the Lock Ring facing the ball joint. Model: NBE-M2-13 Metal Strap PoE Adapter with Power Cord Quick Start LED will light blue when the wireless signal Mounting Bracket Guide strength is equal to or above -94 dBm. (24V, 0.5A) LED will light blue when the wireless signal strength is equal to or above -80 dBm. TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet LED will light blue when the wireless signal cable and earth grounding must be used as conditions of product warranty. TOUGHCable™ is designed for outdoor installations. It is the customer’s responsibility to follow local country strength is equal to or above -73 dBm. regulations, including operation within legal frequency channels, output power, and Dynamic Frequency Selection (DFS) requirements. LED will light blue when the wireless signal strength is equal to or above -65 dBm. Reset Button Ethernet Port High-Performance 13 dBi (10/100 Mbps) airMAX® CPE Model: NBE-M2-13 4. If you are using the optional NanoBeam Wall Mount Kit, 5. Attach the NanoBeam to the Ball Joint Mount and turn the Connecting to the PoE Adapter 4. Connect the other end of the Ethernet cable from the Mounting the PoE Adapter (Optional) Accessing airOS Installer Compliance Responsibility then skip to step b. Lock Ring to secure it. Keep the Lock Ring loose enough to NanoBeam to the Ethernet port labeled POE on the allow the NanoBeam to pivot for aiming. 1. Remove the port cover by pressing down on the center of PoE Adapter. 1. Slide the PoE Mounting Bracket down to remove it from the Verify connectivity in the airOS Configuration Interface. Devices must be professionally installed and it is the a. To attach the Ball Joint Mount to the wall, insert a the cover and sliding the cover out. PoE Adapter. professional installer's responsibility to make sure the device is fastener (not included) through the center of the ball 1. Make sure that your host machine is connected via Ethernet to the NanoBeam. operated within local country regulatory requirements. joint, and into the wall. Securely tighten the fastener. Proceed to step 5. 2. Configure the Ethernet adapter on your host system with a static IP address on the 192.168.1.x subnet. 3. Launch your web browser and type https://192.168.1.20 in the address field. Press enter (PC) or return (Mac). 5. Connect an Ethernet cable from your LAN or computer to the Ethernet port labeled LAN on the PoE Adapter. 4. The login screen will appear. Enter ubnt in the Username Aiming and Password fields. Select your Country and Language. You 2. Place the PoE Mounting Bracket at the desired location and must agree to the Terms of Use and the Ubiquiti Firmware 1. Ensure the opening of the Ethernet cable is pointed mark the two holes. Pre‑drill the holes if necessary, and towards the ground. License Agreement to use the product. Click Login. then secure the bracket using two fasteners (not included). 2. Aim the front of the NanoBeam towards the other end of the wireless link. 2. Connect an Ethernet cable to the Ethernet port. b. To attach the Ball Joint Mount to the wall, insert the Wall 3. Hand-tighten the Lock Ring to lock the aim. Mount Kit screw through the center of the ball joint, through the Wall Mount Kit plate, and into the wall. Note: Do not use a tool to tighten the Lock Ring. Securely tighten the screw. Tighten the Lock Ring by hand only. 6. Connect the Power Cord to the power port on the PoE The Output Power field is provided to the professional installer Adapter. Connect the other end of the Power Cord to a to assist in meeting regulatory requirements. power outlet. 3. Align the slots of the PoE Adapter with the tabs of the PoE Mounting Bracket, and then slide the adapter down. Note: For the Country setting, U.S. product versions are restricted to a choice of Canada, Puerto Rico, or the U.S. to ensure compliance with FCC/IC regulations. The airOS Configuration Interface will appear, allowing you to customize your settings as needed. For additional details *640-00162-02* 3. Replace the port cover. on the airOS Configuration Interface, refer to the User Guide 640-00162-02 available at documentation.ubnt.com/airmax

Specifications Safety Notices Limited Warranty Returns Limitation of Liability Compliance Industry Canada 1. Read, follow, and keep these instructions. UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the No Products will be accepted for replacement or repair without obtaining EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL NBE-M2-13 a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE FOR FCC CAN ICES-3(B)/NMB-3(B) 2. Heed all warnings. product(s) furnished hereunder (the “Product(s)”) shall be free from defects Dimensions (Mount Included) 189 x 189 x 125 mm in material and workmanship for a period of one (1) year from the date during the warranty period, and the Products being received at UBIQUITI DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES Changes or modifications not expressly approved by the party responsible To reduce potential radio interference to other users, the antenna 3. Only use attachments/accessories specified by the manufacturer. NETWORKS’ facility freight prepaid in accordance with the RMA process of (INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS), ARISING (7.44 x 7.44 x 4.92") of shipment by UBIQUITI NETWORKS under normal use and operation. for compliance could void the user’s authority to operate the equipment. type and its gain should be so chosen that the equivalent isotropically WARNING: Do not use this product in location that can UBIQUITI NETWORKS’ sole and exclusive obligation and liability under UBIQUITI NETWORKS. Products returned without an RMA number will not OUT OF THE USE, INABILITY TO USE, OR THE RESULTS OF USE OF THE radiated power (e.i.r.p.) is not more than that permitted for successful Weight (Mount Included) 530 g be processed and will be returned freight collect or subject to disposal. PRODUCT, WHETHER BASED IN WARRANTY, CONTRACT, TORT OR OTHER This device complies with Part 15 of the FCC Rules. Operation is subject to be submerged by water. the foregoing warranty shall be for UBIQUITI NETWORKS, at its discretion, communication. (1.17 lb) Information on the RMA process and obtaining an RMA number can be LEGAL THEORY, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF the following two conditions. to repair or replace any Product that fails to conform to the above This device complies with Industry Canada licence-exempt RSS standard(s). Operating Frequency 2405 - 2475 MHz 2402-2482MHz WARNING: Avoid using this product during an electrical warranty during the above warranty period. The expense of removal and found at: www.ubnt.com/support/warranty. SUCH DAMAGES. 1. This device may not cause harmful interference, and Operation is subject to the following two conditions: Gain 13 dBi storm. There may be a remote risk of electric shock from reinstallation of any Product is not included in this warranty. The warranty 2. This device must accept any interference received, including lightning. period of any repaired or replaced Product shall not extend beyond its Disclaimer Note interference that may cause undesired operation. 1. This device may not cause interference, and Networking Interface (1) 10/100 Ethernet Port original term. 2. This device must accept any interference, including interference that EXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI Some countries, states and provinces do not allow exclusions of implied This equipment has been tested and found to comply with the limits for a may cause undesired operation of the device. Enclosure Outdoor UV Stabilized Plastic Electrical Safety Information NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA, warranties or conditions, so the above exclusion may not apply to you. Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are Warranty Conditions SERVICE, SOFTWARE AND HARDWARE PROVIDERS HEREBY DISCLAIM You may have other rights that vary from country to country, state to designed to provide reasonable protection against harmful interference in This radio transmitter (IC: 6545A-NBE2M13) has been approved by Industry Max. Power Consumption 6W 1. Compliance is required with respect to voltage, frequency, and current Canada to operate with the antenna types listed below with the maximum The above warranty does not apply if the Product: AND MAKE NO OTHER REPRESENTATION OR WARRANTY OF ANY KIND, state, or province to province. Some countries, states and provinces do not a residential installation. This equipment generates, uses and can radiate requirements indicated on the manufacturer’s label. Connection to a permissible gain and required antenna impedance for each antenna type Power Supply 24V, 0.5A PoE Adapter (Included) (I) has been modified and/or altered, or an addition made thereto, EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, allow the exclusion or limitation of liability for incidental or consequential radio frequency energy and, if not installed and used in accordance with different power source than those specified may result in improper indicated. Antenna types not included in this list, having a gain greater except by Ubiquiti Networks, or Ubiquiti Networks’ authorized REPRESENTATIONS, GUARANTEES, OR WARRANTIES OF MERCHANTABILITY, damages, so the above limitation may not apply to you. EXCEPT TO the instructions, may cause harmful interference to radio communications. Power Method Passive PoE (Pairs 4, 5+; 7, 8 Return) operation, damage to the equipment or pose a fire hazard if the than the maximum gain indicated for that type, are strictly prohibited for representatives, or as approved by Ubiquiti Networks in writing; ACCURACY, QUALITY OF SERVICE OR RESULTS, AVAILABILITY, THE EXTENT ALLOWED BY LOCAL LAW, THESE WARRANTY TERMS DO However, there is no guarantee that interference will not occur in a limitations are not followed. use with this device. Wind Loading 45.4 N @ 200 km/h SATISFACTORY QUALITY, LACK OF VIRUSES, QUIET ENJOYMENT, FITNESS NOT EXCLUDE, RESTRICT OR MODIFY, AND ARE IN ADDITION TO, THE particular installation. If this equipment does cause harmful interference (10.2 lbf @ 125 mph) 2. There are no operator serviceable parts inside this equipment. Service (II) has been painted, rebranded or physically modified in any way; FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT AND ANY MANDATORY STATUTORY RIGHTS APPLICABLE TO THE LICENSE OF ANY to radio or television reception, which can be determined by turning • Integrated antenna, gain: 13 dBi should be provided only by a qualified service technician. (III) has been damaged due to errors or defects in cabling; WARRANTIES ARISING FROM ANY COURSE OF DEALING, USAGE OR SOFTWARE (EMBEDDED IN THE PRODUCT) TO YOU. The United Nations the equipment off and on, the user is encouraged to try to correct the Wind Survivability 200 km/h 3. This equipment is provided with a detachable power cord which has (IV) has been subjected to misuse, abuse, negligence, abnormal TRADE PRACTICE IN CONNECTION WITH SUCH PRODUCTS AND SERVICES. Convention on Contracts for the International Sale of Goods shall not apply interference by one or more of the following measures: (125 mph) an integral safety ground wire intended for connection to a grounded physical, electromagnetic or electrical stress, including lightning BUYER ACKNOWLEDGES THAT NEITHER UBIQUITI NETWORKS NOR to any transactions regarding the sale of the Products. • Reorient or relocate the receiving antenna. Certifications CE, FCC, IC safety outlet. strikes, or accident; ITS THIRD PARTY PROVIDERS CONTROL BUYER’S EQUIPMENT OR THE • Increase the separation between the equipment and receiver. a. Do not substitute the power cord with one that is not the provided TRANSFER OF DATA OVER COMMUNICATIONS FACILITIES, INCLUDING Mounting Pole-Mount (Kit Included) (V) has been damaged or impaired as a result of using third party • Connect the equipment into an outlet on a circuit different from that to approved type. Never use an adapter plug to connect to a 2-wire THE INTERNET, AND THAT THE PRODUCTS AND SERVICES MAY BE Wall-Mount (Not Included) firmware; which the receiver is connected. outlet as this will defeat the continuity of the grounding wire. SUBJECT TO LIMITATIONS, INTERRUPTIONS, DELAYS, CANCELLATIONS Operating Temperature -40 to 80° C (VI) has no original Ubiquiti MAC label, or is missing any other original AND OTHER PROBLEMS INHERENT IN THE USE OF COMMUNICATIONS • Consult the dealer or an experienced radio/TV technician for help. (-40 to 176° F) b. The equipment requires the use of the ground wire as a part of the Ubiquiti label(s); or FACILITIES. UBIQUITI NETWORKS, ITS AFFILIATES AND ITS AND THEIR THIRD safety certification, modification or misuse can provide a shock Operations of this equipment in a residential area is likely to cause Operating Humidity 5 to 95% Noncondensing (VII) has not been received by Ubiquiti within 30 days of issuance of PARTY PROVIDERS ARE NOT RESPONSIBLE FOR ANY INTERRUPTIONS, harmful interference in which case the user will be required to correct the hazard that can result in serious injury or death. DELAYS, CANCELLATIONS, DELIVERY FAILURES, DATA LOSS, CONTENT the RMA. interference at his own expense. Salt Fog Test IEC 68-2-11 (ASTM B117), c. Contact a qualified electrician or the manufacturer if there CORRUPTION, PACKET LOSS, OR OTHER DAMAGE RESULTING FROM ANY In addition, the above warranty shall apply only if: the product has been This radio transmitter (FCC: SWX-NBE2M13) has been approved by FCC Equivalent: MIL-STD-810 G Method 509.5 are questions about the installation prior to connecting the OF THE FOREGOING. In addition, UBIQUITI NETWORKS does not warrant properly installed and used at all times in accordance, and in all material to operate with the antenna types listed below with the maximum Vibration Test IEC 68-2-6 equipment. that the operation of the Products will be error-free or that operation will respects, with the applicable Product documentation; all Ethernet cabling permissible gain and required antenna impedance for each antenna type d. Protective earthing is provided by Listed AC adapter. Building be uninterrupted. In no event shall UBIQUITI NETWORKS be responsible Temperature Shock Test IEC 68-2-14 runs use CAT5 (or above), and for outdoor installations, shielded Ethernet indicated. Antenna types not included in this list, having a gain greater installation shall provide appropriate short-circuit backup for damages or claims of any nature or description relating to system cabling is used, and for indoor installations, indoor cabling requirements than the maximum gain indicated for that type, are strictly prohibited for UV Test IEC 68-2-5 at 40° C (104° F) protection. performance, including coverage, buyer’s selection of products (including are followed. use with this device. Equivalent: ETS 300 019-1-4 the Products) for buyer’s application and/or failure of products (including e. Protective bonding must be installed in accordance with local • Integrated antenna, gain: 13 dBi the Products) to meet government or regulatory requirements. Wind-Driven Rain Test ETS 300 019-1-4 national wiring rules and regulations. Equivalent: MIL-STD-810 G Method 506.5 CAN ICES-3(B)/NMB-3(B) RF Exposure Warning RoHS/WEEE Compliance Statement Español Declaration of Conformity Latviski Ar o UBIQUITI NETWORKS deklarē, ka UBIQUITI NETWORKS ierīce, [Latvian] atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to Pour réduire le risque d’interférence aux autres utilisateurs, le type The antennas used for this transmitter must be installed to provide a La Directiva 2002/96/CE de la UE exige que los equipos que lleven este saistītajiem noteikumiem. d’antenne et son gain doivent être choisies de façon que la puissance símbolo en el propio aparato y/o en su embalaje no deben eliminarse Česky UBIQUITI NETWORKS tímto prohla uje, e tento UBIQUITI NETWORKS separation distance of at least 113 20 cm from all persons and must not be device, je ve shod se základními po adavky a dal ími p íslu n mi isotrope rayonnée équivalente (PIRE) ne dépasse pas ce qui est nécessaire junto con otros residuos urbanos no seleccionados. El símbolo indica [Czech] Lietuviškai UBIQUITI NETWORKS deklaruoja, kad šis UBIQUITI NETWORKS located or operating in conjunction with any other antenna or transmitter. ustanoveními sm rnice 1999/5/ES. įrenginys atitinka esminius reikalavimus ir kitas 1999/5/EB pour une communication réussie. que el producto en cuestión debe separarse de los residuos domésticos [Lithuanian] Les antennes utilisées pour ce transmetteur doivent être installé en Dansk Undertegnede UBIQUITI NETWORKS erklærer herved, at følgende Direktyvos nuostatas. Cet appareil est conforme à la norme RSS Industrie Canada exempts de considérant une distance de séparation de toute personnes d’au moins convencionales con vistas a su eliminación. Es responsabilidad suya desechar este y cualesquiera otros aparatos eléctricos y electrónicos a [Danish] udstyr UBIQUITI NETWORKS device, overholder de væsentlige krav Malti Hawnhekk, UBIQUITI NETWORKS, jiddikjara li dan UBIQUITI licence norme(s). Son fonctionnement est soumis aux deux conditions 113 20 cm et ne doivent pas être localisé ou utilisé en conflit avec tout autre English og øvrige relevante krav i direktiv 1999/5/EF. [Maltese] NETWORKS device, jikkonforma mal- ti ijiet essenzjali u ma suivantes: antenne ou transmetteur. través de los puntos de recogida que ponen a su disposición el gobierno y provvedimenti o rajn relevanti li hemm fid-Dirrettiva 1999/5/EC. European Directive 2002/96/EC requires that the equipment bearing las autoridades locales. Al desechar y reciclar correctamente estos aparatos Nederlands Hierbij verklaart UBIQUITI NETWORKS dat het toestel UBIQUITI 1. Cet appareil ne peut pas provoquer d’interférences et this symbol on the product and/or its packaging must not be disposed estará contribuyendo a evitar posibles consecuencias negativas para el [Dutch] NETWORKS device, in overeenstemming is met de essentiële eisen Norsk UBIQUITI NETWORKS erklærer herved at utstyret UBIQUITI 2. Cet appareil doit accepter toute interférence, y compris les CE Marking of with unsorted municipal waste. The symbol indicates that this en de andere relevante bepalingen van richtlijn 1999/5/EG. [Norwegian] NETWORKS device, er i samsvar med de grunnleggende krav og medio ambiente y la salud de las personas. Si desea obtener información Bij deze verklaart UBIQUITI NETWORKS dat deze UBIQUITI øvrige relevante krav i direktiv 1999/5/EF. interférences qui peuvent causer un mauvais fonctionnement du CE marking on this product represents the product is in compliance with all product should be disposed of separately from regular household waste más detallada sobre la eliminación segura de su aparato usado, consulte a dispositif. directives that are applicable to it. streams. It is your responsibility to dispose of this and other electric and las autoridades locales, al servicio de recogida y eliminación de residuos de NETWORKS device, voldoet aan de essentiële eisen en aan de Slovensky UBIQUITI NETWORKS t mto vyhlasuje, e UBIQUITI NETWORKS electronic equipment via designated collection facilities appointed by the su zona o pregunte en la tienda donde adquirió el producto. overige relevante bepalingen van Richtlijn 1999/5/EC. [Slovak] device, sp a základné po iadavky a v etky príslu né ustanovenia Cet émetteur radio (IC: 6545A-NBE2M13) a été approuvée par Industrie Smernice 1999/5/ES. Canada pour l’exploitation avec l’antenne types énumérés ci-dessous avec government or local authorities. Correct disposal and recycling will help English Hereby, UBIQUITI NETWORKS, declares that this UBIQUITI le gain maximal admissible et requis l’impédance de l’antenne pour chaque prevent potential negative consequences to the environment and human Français NETWORKS device, is in compliance with the essential Svenska Härmed intygar UBIQUITI NETWORKS att denna UBIQUITI health. For more detailed information about the disposal of your old requirements and other relevant provisions of Directive 1999/5/EC. [Swedish] NETWORKS device, står I överensstämmelse med de väsentliga type d’antenne indiqué. Types d’antenne non inclus dans cette liste, ayant La directive européenne 2002/96/CE exige que l’équipement sur lequel egenskapskrav och övriga relevanta bestämmelser som framgår av un gain supérieur au gain maximal indiqué pour ce type, sont strictement equipment, please contact your local authorities, waste disposal service, or Eesti Käesolevaga kinnitab UBIQUITI NETWORKS seadme UBIQUITI est apposé ce symbole sur le produit et/ou son emballage ne soit pas jeté direktiv 1999/5/EG. interdits pour une utilisation avec cet appareil. Immédiatement suite à la the shop where you purchased the product. [Estonian] NETWORKS device, vastavust direktiivi 1999/5/EÜ põhinõuetele ja avec les autres ordures ménagères. Ce symbole indique que le produit Español Por medio de la presente UBIQUITI NETWORKS declara que el remarque, le fabricant doit fournir une liste de tous les types d’antenne nimetatud direktiivist tulenevatele teistele asjakohastele sätetele. Deutsch doit être éliminé dans un circuit distinct de celui pour les déchets des [Spanish] UBIQUITI NETWORKS device, cumple con los requisitos esenciales approuvé pour une utilisation avec l’émetteur, ce qui indique le gain ménages. Il est de votre responsabilité de jeter ce matériel ainsi que tout Suomi UBIQUITI NETWORKS vakuuttaa täten että UBIQUITI NETWORKS y cualesquiera otras disposiciones aplicables o exigibles de la maximal d’antenne permis (en dBi) et requis d’impédance pour chacun. Die Europäische Richtlinie 2002/96/EC verlangt, dass technische autre matériel électrique ou électronique par les moyens de collecte [Finnish] device, tyyppinen laite on direktiivin 1999/5/EY oleellisten Directiva 1999/5/CE. Ausrüstung, die direkt am Gerät und/oder an der Verpackung mit diesem indiqués par le gouvernement et les pouvoirs publics des collectivités vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen. • Antenne intégré, gain: 13 dBi Polski Niniejszym, firma UBIQUITI NETWORKS o wiadcza, e produkt serii Symbol versehen ist, nicht zusammen mit unsortiertem Gemeindeabfall territoriales. L’élimination et le recyclage en bonne et due forme ont pour Français Par la présente UBIQUITI NETWORKS déclare que l’appareil UBIQUITI NETWORKS device, spełnia zasadnicze wymagania i inne [Polish] entsorgt werden darf. Das Symbol weist darauf hin, dass das Produkt but de lutter contre l’impact néfaste potentiel de ce type de produits [French] UBIQUITI NETWORKS, device est conforme aux exigences istotne postanowienia Dyrektywy 1999/5/EC. www.ubnt.com von regulärem Haushaltmüll getrennt entsorgt werden sollte. Es sur l’environnement et la santé publique. Pour plus d’informations sur le essentielles et aux autres dispositions pertinentes de la directive Português UBIQUITI NETWORKS declara que este UBIQUITI NETWORKS device, liegt in Ihrer Verantwortung, dieses Gerät und andere elektrische mode d’élimination de votre ancien équipement, veuillez prendre contact 1999/5/CE. [Portuguese] está conforme com os requisitos essenciais e outras disposições da und elektronische Geräte über die dafür zuständigen und von der avec les pouvoirs publics locaux, le service de traitement des déchets, ou Deutsch Hiermit erklärt UBIQUITI NETWORKS, dass sich dieses UBIQUITI Directiva 1999/5/CE. Regierung oder örtlichen Behörden dazu bestimmten Sammelstellen zu l’endroit où vous avez acheté le produit. [German] NETWORKS Gerät in Übereinstimmung mit den grundlegenden Română Prin prezenta, UBIQUITI NETWORKS declară că acest dispozitiv entsorgen. Ordnungsgemäßes Entsorgen und Recyceln trägt dazu bei, Anforderungen und den anderen relevanten Vorschriften der UBIQUITI NETWORKS este în conformitate cu cerințele esențiale și Italiano [Romanian] potentielle negative Folgen für Umwelt und die menschliche Gesundheit Richtlinie 1999/5/EG befindet. (BMWi) alte prevederi relevante ale Directivei 1999/5/CE. zu vermeiden. Wenn Sie weitere Informationen zur Entsorgung Ihrer Ελληνική ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ UBIQUITI NETWORKS ΔΗΛΩΝΕΙ ΟΤΙ UBIQUITI La direttiva europea 2002/96/EC richiede che le apparecchiature Altgeräte benötigen, wenden Sie sich bitte an die örtlichen Behörden oder städtischen Entsorgungsdienste oder an den Händler, bei dem Sie das contrassegnate con questo simbolo sul prodotto e/o sull’imballaggio non [Greek] NETWORKS device, ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ Online Resources siano smaltite insieme ai rifiuti urbani non differenziati. Il simbolo indica Produkt erworben haben. 1995/5/ΕΚ. Support support.ubnt.com che questo prodotto non deve essere smaltito insieme ai normali rifiuti domestici. È responsabilità del proprietario smaltire sia questi prodotti sia Magyar Alulírott, UBIQUITI NETWORKS nyilatkozom, hogy a Community community.ubnt.com [Hungarian] UBIQUITI NETWORKS device, megfelel a vonatkozó alapvetõ le altre apparecchiature elettriche ed elettroniche mediante le specifiche követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak. Downloads downloads.ubnt.com strutture di raccolta indicate dal governo o dagli enti pubblici locali. Il corretto smaltimento ed il riciclaggio aiuteranno a prevenire conseguenze Íslenska Hér me l sir UBIQUITI NETWORKS yfir ví a UBIQUITI NETWORKS potenzialmente negative per l’ambiente e per la salute dell’essere umano. [Icelandic] device, er í samræmi vi grunnkröfur og a rar kröfur, sem ger ar eru í tilskipun 1999/5/EC. Per ricevere informazioni più dettagliate circa lo smaltimento delle vecchie apparecchiature in Vostro possesso, Vi invitiamo a contattare gli enti Italiano Con la presente UBIQUITI NETWORKS dichiara che questo UBIQUITI pubblici di competenza, il servizio di smaltimento rifiuti o il negozio nel [Italian] NETWORKS device, è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. ©2015 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the quale avete acquistato il prodotto. Ubiquiti U logo, the Ubiquiti beam logo, airMAX, airOS, EdgeRouter, EdgeSwitch, NanoBeam, TOUGHCable, and TOUGHSwitch are trademarks or registered trademarks of Ubiquiti Networks, Inc. in the United States and in other countries. All other trademarks are the property of their respective owners. PHJL032015


Document Created: 2019-10-28 22:48:04
Document Modified: 2019-10-28 22:48:04
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC