MPE

FCC ID: SWX-MICRO

RF Exposure Info

Download: PDF
FCCID_2486945

RF EXPOSURE REPORT REPORT NO.: SA141024D09 MODEL NO.: UVC-Micro FCC ID: SWX-MICRO RECEIVED: Oct. 27, 2014 TESTED: Nov. 3 ~ Dec. 11, 2014 ISSUED: Dec. 12, 2014 APPLICANT: Ubiquiti Networks, Inc. ADDRESS: 12F, No105, Song Ren Rd., SinYi District, Taipei, Taiwan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C. ) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: SA141024D09 1 of 6 Report Format Version 5.0.1

TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................ 3 1. CERTIFICATION ........................................................................................... 4 2. RF EXPOSURE LIMIT .................................................................................. 5 3. MPE CALCULATION FORMULA .................................................................. 5 4. CLASSIFICATION ......................................................................................... 5 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER ............... 6 Report No.: SA141024D09 2 of 6 Report Format Version 5.0.1

RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA141024D09 Original release Dec. 12, 2014 Report No.: SA141024D09 3 of 6 Report Format Version 5.0.1

1. CERTIFICATION PRODUCT: Video Camera MODEL NO.: UVC-Micro APPLICANT: Ubiquiti Networks, Inc. TESTED: Nov. 3 ~ Dec. 11, 2014 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1091) KDB 447498 D03 IEEE C95.1 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Dec. 12, 2014 ( Annie Chang / Supervisor ) APPROVED BY : , DATE: Dec. 12, 2014 ( Rex Lai / Assistant Manager ) Report No.: SA141024D09 4 of 6 Report Format Version 5.0.1

2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY ELECTRIC FIELD MAGNETIC FIELD POWER DENSITY AVERAGE TIME RANGE (MHz) STRENGTH (V/m) STRENGTH (A/m) (mW/cm2) (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 … … F/1500 30 1500-100,000 … … 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA141024D09 5 of 6 Report Format Version 5.0.1

5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER TUNE UP MAX. ANTENNA POWER FREQUENCY MAX POWER DISTANCE LIMIT POWER GAIN DENSITY BAND (MHz) (dBm) (cm) (mW/cm2) (dBm) (dBi) (mW/cm2) 2.4GHz 14.66 17.16 1 20 0.0130 1.00 5.0GHz 17.47 19.97 1 20 0.0249 1.00 Note: 1. The 2.4G and 5G frequency can’t transmit at the same time. 2. Tune up tolerance= 2.5 --- END --- CONCULSION: Both of the modules can transmit simultaneously, the formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ……etc. < 1 CPD = Calculation power density LPD = Limit of power density 1. BLUETOOTH + WLAN =0.0003 /1 + 0.0665 /1 = 0.0668 OR PIFA ANTENNA 1. WLAN (2.4G) + WLAN (5.0G BAND 1) = 0.0726/1 + 0.0051/1 = 0.0777 2. WLAN (2.4G) + WLAN (5.0G BAND 4) = 0.0726/1 + 0.0168/1 = 0.0894 Therefore, the maximum calculation of this situation is 0.0894, which is less than the “1” limit. Report No.: SA141024D09 6 of 6 Report Format Version 5.0.1


Document Created: 2019-11-12 06:27:04
Document Modified: 2019-11-12 06:27:04
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC