MPE Calculation

FCC ID: SWX-M5LD

RF Exposure Info

Download: PDF
FCCID_1518179

EMC Test Data Client: Ubiquiti Networks Job Number: J82749 T-Log Number: T82792 Model: NanoStation Loco M5 Account Manager: Susan Pelzl Contact: Jennifer Sanchez Standard: FCC 15E, RSS-210 Class: N/A Maximum Permissible Exposure Test Specific Details The objective of this test session is to perform final qualification testing of the EUT with respect to the Objective: specification listed above. Date of Test: 7/28/2011 Test Engineer: Mark Briggs General Test Configuration Calculation uses the free space transmission formula: S = (PG)/(4 πd 2) Where: S is power density (W/m2), P is output power (W), G is antenna gain relative to isotropic, d is separation distance from the transmitting antenna (m). Summary of Results Device complies with Power Density requirements at Yes 20cm separation: Modifications Made During Testing No modifications were made to the EUT during testing Deviations From The Standard No deviations were made from the requirements of the standard. MPE Calculation Use: General Antenna: 16dBi integral antenna Power Density (S) MPE Limit Freq. EIRP EIRP at 20 cm at 20 cm Comments MHz dBm mW mW/cm^2 mW/cm^2 5.25-5.35 29.7 933.25 0.186 1.000 HT30 mode had the highest eirp 5.47-5.725 29.7 933.25 0.186 1.000 HT20 mode has the highest eirp T82792 Loco.xls MPE Page 1 of 1


Document Created: 2011-07-28 12:19:02
Document Modified: 2011-07-28 12:19:02
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC