Manual

FCC ID: SWX-M2B

Users Manual

Download: PDF
FCCID_1242947

M2B OEM Users Guide

TECHNICAL SPECIFICATIONS SYSTEM INFORMATION Processor Specs Atheros MIPS 24KC, 400MHz Memory Information 32MB SDRAM, 8MB Flash Networking Interface 1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface REGULATORY / COMPLIANCE INFORMATION Wireless Approvals FCC Part 15.247, IC RS210, CE RoHS Compliance YES OPERATING FREQUENCY 2412MHz-2462MHz TX POWER SPECIFICATIONS RX SPECIFICATIONS DataRate Avg. TX Tolerance DataRate Sensitivity Tolerance 1-24Mbps 28 dBm +/-2dB 1-24Mbps -97 dBm min. +/-2dB 36Mbps 27 dBm +/-2dB 36Mbps -80 dBm +/-2dB 11g 11g 48Mbps 26 dBm +/-2dB 48Mbps -77 dBm +/-2dB 54Mbps 24 dBm +/-2dB 54Mbps -75 dBm +/-2dB MCS0 28 dBm +/-2dB MCS0 -96 dBm +/-2dB MCS1 28 dBm +/-2dB MCS1 -95 dBm +/-2dB Airmax 11n Airmax11n MCS2 28 dBm +/-2dB MCS2 -92 dBm +/-2dB MCS3 28 dBm +/-2dB MCS3 -90 dBm +/-2dB MCS4 27 dBm +/-2dB MCS4 -86 dBm +/-2dB MCS5 25 dBm +/-2dB MCS5 -83 dBm +/-2dB MCS6 24 dBm +/-2dB MCS6 -77 dBm +/-2dB MCS7 23 dBm +/-2dB MCS7 -74 dBm +/-2dB PHYSICAL / ELECTRICAL / ENVIRONMENTAL Enclosure Size 16cm length x 8cm width x 3cm height Weight 0.5 kg Max Power Consumption 3.5 Watts Power Supply POE up to 24V DC (sold separately) Power Method Passive Power over Ethernet (pairs 4,5+; 7,8 return) Operating Temperature -30C to 75C Operating Humidity 5 to 95% Condensing Shock and Vibration ETSI300-019-1.4

COMPLIANCE INFORMATION FCC Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. The antennas used for this transmitter must be installed to provide a separation distance of at least following distance from all persons and must not be located or operating in conjunction with any other antenna or transmitter. 38cm distance for the Grid Antenna 20cm distance for the Omni Antenna Highest gains are 24dBi for Grid and 6dBi for Omni Antenna INDUSTRY CANADA This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication. The device has been designed to operate with the antennas listed below and having a maximum gain of 24dBi. Antennas not included in this list or having a gain greater than 24dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms This device must be professionally installed and is designed for for outdoor point-to-point wireless links.


Document Created: 2010-02-11 14:30:42
Document Modified: 2010-02-11 14:30:42
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC