|Equipment||Digital Transmission Radio|
|Applicant Business||Ubiquiti Networks, Inc.|
|Business Address||685 Third Avenue, 27th Floor , New York,New York United States 10017|
|TCB Scope||A4: UNII devices & low power transmitters using spread spectrum techniques|
|TCB Email||[email protected]|
|Applicant||Mark Feil – Compliance Manager |
|Applicant Phone|| |
|Applicant Email||[email protected]|
|Test Firm||MET Laboratories, Inc.|
|Test Firm Contact||Frank Casbolt|
|Test Firm Phone|| |
|Test Firm Fax||4103543313|
|Test Firm Email||[email protected]|
|Certified By||Mark Feil – Compliance Manager|
Comment [/HKfsItNpOzrfdVN00kTvg==]: Power listed is combined conducted output power. The device supports 10/20/30/40/50MHz bandwidth. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 200 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures.
Comment [bHh69EgZFYurRRtwB5MlCA==]: Output Power listed is conducted.
Comment [rzAwcJ+OVu+bl33Lo9h50A==]: Power listed is the maximum combined conducted output power. This device must be professionally installed. Marketing to the General Public is prohibited. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 128 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. This device has 10 MHz and 20 MHz bandwidth modes. This device defined to high power device category. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The maximum antenna gain is 27dBi.