User Manual

FCC ID: SWX-L2

Users Manual

Download: PDF
FCCID_1318058

L2 OEM Users Guide

TECH SPECS SYSTEM INFORMATION Processor Specs Atheros MIPS 4KC, 180MHz Memory Information 16MB SDRAM, 4MB Flash Networking Interface 1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface REGULATORY / COMPLIANCE INFORMATION Wireless Approvals FCC Part 15.247, IC RS210, CE RoHS Compliance YES RADIO OPERATING FREQUENCY 2412-2462 MHz TX SPECIFICATIONS RX SPECIFICATIONS DataRate TX Power Tolerance DataRate Sensitivity Tolerance 1Mbps 20 dBm +/-1dB 1Mbps -95 dBm +/-1dB 802.11b 802.11b 2Mbps 20 dBm +/-1dB 2Mbps -94 dBm +/-1dB 5.5Mbps 20 dBm +/-1dB 5.5Mbps -93 dBm +/-1dB 11Mbps 20 dBm +/-1dB 11Mbps -90 dBm +/-1dB 6Mbps 20 dBm +/-1dB 6Mbps -92 dBm +/-1dB 802.11g OFDM 802.11g OFDM 9Mbps 20 dBm +/-1dB 9Mbps -91 dBm +/-1dB 12Mbps 20 dBm +/-1dB 12Mbps -89 dBm +/-1dB 18Mbps 20 dBm +/-1dB 18Mbps -88 dBm +/-1dB 24Mbps 20 dBm +/-1dB 24Mbps -84 dBm +/-1dB 36Mbps 18 dBm +/-1dB 36Mbps -81 dBm +/-1dB 48Mbps 16 dBm +/-1dB 48Mbps -75 dBm +/-1dB 54Mbps 15 dBm +/-1dB 54Mbps -72 dBm +/-1dB PHYSICAL / ELECTRICAL / ENVIRONMENTAL Enclosure Size 16.3 cm. length x 3.1 cm. height x 8cm. width Weight 0.18kg Enclosure Characteristics Outdoor UV Stabalized Plastic Mounting Kit Pole Mounting Kit included Max Power Consumption 4 Watts Power Supply 12V, 1A (12 Watts). Supply and injector included Power Method Passive Power over Ethernet (pairs 4,5+; 7,8 return) Operating Temperature -20C to +70C Operating Humidity 5 to 95% Condensing Shock and Vibration ETSI300-019-1.4

COMPLIANCE INFORMATION FCC Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. The antennas used for this transmitter must be installed to provide a separation distance of at least following from all users: 20cm INDUSTRY CANADA This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication. The device has been designed to operate with the antennas listed below and having a maximum gain of 8dBi. Antennas not included in this list or having a gain greater than 8dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. This device must be professionally installed and is designed strictly for for outdoor point- to-point wireless links.


Document Created: 2010-07-16 05:56:24
Document Modified: 2010-07-16 05:56:24
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC