Declaration Letter

FCC ID: SWX-AFP

Cover Letter(s)

Download: PDF
FCCID_3024076

                            Ubiquiti Networks, Inc.
                2580 Orchard Parkway, San Jose, California 95131, United States
                           Tel: 408-942-3084 ; Fax: 408-904-5255


We have declared below featured for device identified as
FCC ID: SWX-AFP

(1) DFS Device --            Master,       Client with Radar detection capability ,
                             Client without radar detection capability,     N/A

(2) Active / Passive Scanning , adhoc mode access point capability

         Frequency         Scanning      Ad Hoc       Access        WiFi        WiFi      Extender
         Band (MHz)           Plan        Mode         point       Direct       Direct     Mode
                           (Active or   capability   capability    Group        Group
                            Passive)                               Owner        Client
         2412 – 2462         Active         No          Yes         No           No          Yes
         5180 – 5240         Active         No          Yes         No           No          Yes
         5745 – 5825         Active         No          Yes         No           No          Yes

(3) Country code selection capability to end user-       Yes ,     No
    If yes, pls explain how it was implemented : (pls also help to provide detail of options for each
    country selection)


(4) Meet Part 15.202 requirement -          Yes ,     No ,
    * A master device is defined as a device operating in a mode in which it has the capability to
    transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate
    a network by sending enabling signals to other devices
    * A client device is defined as a device operating in a mode in which the transmissions of the
    device are under control of the master. A device in client mode is not able to initiate a network.

(5) For client devices that have software configuration control to operate in different modes (active
    scanning in some and passive scanning in others) in different bands (devices with multiple
    equipment classes or those that operate on non-DFS frequencies) or modular devices which
    configure the modes of operations through software, the application must provide software and
    operations description on how the software and / or hardware is implemented to ensure that proper
    operations modes can not be modified by end user or an installer.
        Apply ,     No Apply ,    (If apply , pls help to provide explanation on it was implement , and
    how software was controlled)




_________________________________
Michael Taylor
compliance@ubnt.com



Document Created: 2017-12-08 05:24:34
Document Modified: 2017-12-08 05:24:34

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC