Attestation for DFS functionality on the Client AF5

FCC ID: SWX-AF5

Attestation Statements

Download: PDF
FCCID_2187950

Date: 2014/2/12 Federal Communications Commission 445 12th Street, SW Washington, DC 20554 RE: Request for Confidentiality In reference to the application under FCC ID: SWX-AF5, and pursuant to FCC 06-96 Section 5.1, Table 1 and 2 of the Commission’s Rules, Ubiquiti Networks hereby attests that production units for the United States market, when configured for operation under Part 15 subpart E on separate TX and RX frequencies, the Client device will also enable DFS functionality similar to functionality of the Master device. The firmware that will enable this functionality will be incorporated in the initial product release and will be version AF02-2.0. This can be confirmed via the main index page where firmware version is displayed and also the system page. The frequency ranges for operation in the U-NII band are as follows. Equipment  Specifications   Center  Frequency   Center  Frequency   Channel     Selection   Selection   Bandwidth   Below  5600MHz   Above  5650MHz   10  MHz   5476   5594   5656   5719   20  MHz   5481   5589   5661   5714   40  MHz   5492   5578   5672   5703   50  MHz   5497   5573   5677   5698   Sincerely, Alexandros Pavlos Ubiquiti Networks Lead Certification/Test Engineer


Document Created: 0420-07-03 00:00:00
Document Modified: 0420-07-03 00:00:00
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC