User Manual

FCC ID: SWX-ACBISP

Users Manual

Download: PDF
FCCID_3616812

airMAX® Home Wi-Fi
Access Point with PoE In/Out
Model: ACB-ISP




Introduction
Thank you for purchasing the airMAX® airCube™ ISP Access Point. This
Quick Start Guide is designed to guide you through installation and also
includes warranty terms.

Package Contents




                                             airMAX® Home Wi-Fi
                                             Access Point with PoE In/Out
                                             Model: ACB-ISP




         airCube ISP Access Point                       Quick Start Guide




                                                                            1


Hardware Overview
Access Point Front




             LED


The LED lights up when the airCube is powered on.




2


Access Point Back




                                                               WAN Port
                 LAN Ports
                                                              Power Port




     1-3              Three Fast Ethernet ports available to connect 10/100
                      Mbps devices to the Internet. Port 1 also allows 24V PoE
                      In and can be used to power the airCube.

       WAN
   24V PoE OUT        Connects to and powers a 24V PoE airMAX CPE radio.

                      The Power Port can be used to power the airCube. The
                      power adapter must be 5V with a Micro USB connector
                      (not included).




                                                                                 3


Hardware Installation

1. Connect one end of an Ethernet cable to the WAN Port on the back
   of the airCube. Connect the other end of the Ethernet cable to your
   airMAX CPE radio.




4


2. The airCube can be powered one of two ways: Micro USB adapter (5V)
   or PoE 24V In on LAN Port 1.
   • If using a Micro USB power adapter (not included) to power the
     airCube, connect the power adapter to the Power Port on the back of
     the airCube and the other end of the adapter into a power outlet.




                                                                       5


    • If using Power over Ethernet to power the airCube, connect one end
      of an Ethernet cable to LAN Port 1 and the other end of the cable to a
      24V PoE Out port on a PoE adapter.




3. The LED in the base of the airCube will light up as soon as the device
   is powered on.




6


UMobile App
The airCube can be installed and configured using the U Mobile app
on your mobile phone or tablet. Follow these steps to ensure proper
installation:
1. Download and install the U Mobile app from the App Store (iOS) or
   Google Play™ (Android).

        Ensure that Wi-Fi is enabled on your mobile phone
        or tablet.


2. Launch the U Mobile app and proceed to the section that corresponds
   with your mobile device: Android Users or iOS Users.




                                                                         7


Android Users

1. Tap the           icon to add a new device to U Mobile.
2. Select Discover to scan for devices on the active Wi-Fi networks in
   range.
3. Tap the airCube device from the list. U Mobile will activate a QR scanner
   using the camera function on your mobile device.
4. Scan the QR code located on the bottom of the airCube. Once the QR
   code is scanned, U Mobile will return to the main app screen.
5. Proceed to the section: Verify Connection to airCube
iOS Users

1. Tap the   Installer   icon to add a new device to U Mobile.
2. From the two options provided, select airCube. U Mobile will activate a
   QR scanner using the camera function on your mobile device.
3. Scan the QR code located on the bottom of the airCube. Once the QR
   code is scanned, U Mobile will return to the main app screen.

4. Exit U Mobile and open the Settings app on your mobile device.

5. Select Wi-Fi and connect to the SSID for the airCube wireless network
   named: airCube-<MAC Address>
6. Once the WPA key is filled in, return to the U Mobile app.

8


Verify Connection to airCube

1. Tap Status to verify connectivity to the airCube.




                                                       9


    Wesy                       System


sermncs
ssD                   airCube:235620M43B

Securty                        WPAZ—AES

WPA Preshared Key
1EEE 80211 Mode                 A/N mixed

Channel Width                     20 MHz
Frequency                       2420 MHz
Output Power                            Figh


                    High

                    Revert              Apply


 J          18        T


3. Tap More to see additional actions for the airCube.




4. Tap Disconnect to disconnect the app from the airCube.
                                                            11


Specifications
                          airCube-ISP
Dimensions                                          87.80 x 89.50 x 89.25 mm
                                                          (3.46 x 3.52 x 3.51")
Weight                                                         280 g (9.88 oz)
Management Interface                                          Wi-Fi / Ethernet
Networking Interface                               10/100 Fast Ethernet Ports
LED                                                                     Status
Antenna Gain                                                             4 dBi
Max. Speeds                                                         300 Mbps
Max. Power Consumption                                                     5W
Max. TX Power                                                         20 dBm
Power Supply                                                                5V
Power Method                                           Micro USB Adapter or
                                                    PoE 24V In on LAN Port 1
PoE Out                                 Controllable 24V PoE Out (+4, 5; -7, 8)
                                                               on WAN Port

Supported Power Voltage                                             4.95-5.05V
Operating Temperature                                              -10 to 50° C
                                                                (-14 to 122° F)
Operating Humidity                                  5 to 95% Noncondensing
ESD/EMP Protection                                     ± 24 kV RJ-45 Interface
Certifications                                                     CE, FCC, IC


12


Safety Notices
1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories specified by the manufacturer.
     WARNING: Do not use this product in location that can be
     submerged by water.
     WARNING: Avoid using this product during an electrical storm. There
     may be a remote risk of electric shock from lightning.




                                                                      13


Electrical Safety Information
1. Compliance is required with respect to voltage, frequency, and current
   requirements indicated on the manufacturer’s label. Connection to a
   different power source than those specified may result in improper
   operation, damage to the equipment or pose a fire hazard if the
   limitations are not followed.
2. There are no operator serviceable parts inside this equipment. Service
   should be provided only by a qualified service technician.
3. This equipment is provided with a detachable power cord which has
   an integral safety ground wire intended for connection to a grounded
   safety outlet.
     a. Do not substitute the power cord with one that is not the provided
        approved type. Never use an adapter plug to connect to a 2-wire outlet as
        this will defeat the continuity of the grounding wire.
     b. The equipment requires the use of the ground wire as a part of the safety
        certification, modification or misuse can provide a shock hazard that can
        result in serious injury or death.
     c. Contact a qualified electrician or the manufacturer if there are questions
        about the installation prior to connecting the equipment.
     d. Protective earthing is provided by Listed AC adapter. Building installation
        shall provide appropriate short-circuit backup protection.
     e. Protective bonding must be installed in accordance with local national
        wiring rules and regulations.




14


Limited Warranty
UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the
product(s) furnished hereunder (the “Product(s)”) shall be free from
defects in material and workmanship for a period of one (1) year from
the date of shipment by UBIQUITI NETWORKS under normal use and
operation. UBIQUITI NETWORKS’ sole and exclusive obligation and
liability under the foregoing warranty shall be for UBIQUITI NETWORKS,
at its discretion, to repair or replace any Product that fails to conform to
the above warranty during the above warranty period. The expense of
removal and reinstallation of any Product is not included in this warranty.
The warranty period of any repaired or replaced Product shall not extend
beyond its original term.




                                                                           15


Warranty Conditions
The warranty does not apply if the Product:
(I)   has been modified and/or altered, or an addition made thereto, except by
      Ubiquiti Networks, or Ubiquiti Networks’ authorized representatives, or as
      approved by Ubiquiti Networks in writing;
(II) has been painted, rebranded or physically modified in any way;
(III) has been damaged due to errors or defects in cabling;
(IV) has been subjected to misuse, abuse, negligence, abnormal physical,
      electromagnetic or electrical stress, including lightning strikes, or accident;
(V) has been damaged as a result of using third party firmware;
(VI) has no original Ubiquiti MAC label, or is missing any other original Ubiquiti
      label(s); or
(VII) has not been received by Ubiquiti within 30 days of issuance of the RMA.
In addition, the above warranty shall apply only if: the product has been properly
installed and used at all times in accordance, and in all material respects, with the
applicable Product documentation; all Ethernet cabling runs use CAT5 (or above),
and for outdoor installations, shielded Ethernet cabling is used, and for indoor
installations, indoor cabling requirements are followed.

Returns
No Products will be accepted for replacement or repair without obtaining a
Return Materials Authorization (RMA) number from UBIQUITI NETWORKS during
the warranty period, and the Products being received at UBIQUITI NETWORKS’
facility freight prepaid in accordance with the RMA process of UBIQUITI
NETWORKS. Products returned without an RMA number will not be processed
and will be returned freight collect or subject to disposal. Information on the RMA
process and obtaining an RMA number can be found at:
www.ubnt.com/support/warranty

16


Disclaimer
EXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI
NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA, SERVICE,
SOFTWARE AND HARDWARE PROVIDERS HEREBY DISCLAIM AND MAKE NO
OTHER REPRESENTATION OR WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR
STATUTORY, INCLUDING, BUT NOT LIMITED TO, REPRESENTATIONS, GUARANTEES,
OR WARRANTIES OF MERCHANTABILITY, ACCURACY, QUALITY OF SERVICE
OR RESULTS, AVAILABILITY, SATISFACTORY QUALITY, LACK OF VIRUSES, QUIET
ENJOYMENT, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
AND ANY WARRANTIES ARISING FROM ANY COURSE OF DEALING, USAGE OR
TRADE PRACTICE IN CONNECTION WITH SUCH PRODUCTS AND SERVICES.
BUYER ACKNOWLEDGES THAT NEITHER UBIQUITI NETWORKS NOR ITS THIRD
PARTY PROVIDERS CONTROL BUYER’S EQUIPMENT OR THE TRANSFER OF DATA
OVER COMMUNICATIONS FACILITIES, INCLUDING THE INTERNET, AND THAT THE
PRODUCTS AND SERVICES MAY BE SUBJECT TO LIMITATIONS, INTERRUPTIONS,
DELAYS, CANCELLATIONS AND OTHER PROBLEMS INHERENT IN THE USE OF
COMMUNICATIONS FACILITIES. UBIQUITI NETWORKS, ITS AFFILIATES AND
ITS AND THEIR THIRD PARTY PROVIDERS ARE NOT RESPONSIBLE FOR ANY
INTERRUPTIONS, DELAYS, CANCELLATIONS, DELIVERY FAILURES, DATA LOSS,
CONTENT CORRUPTION, PACKET LOSS, OR OTHER DAMAGE RESULTING FROM
ANY OF THE FOREGOING. In addition, UBIQUITI NETWORKS does not warrant
that the operation of the Products will be error-free or that operation will
be uninterrupted. In no event shall UBIQUITI NETWORKS be responsible for
damages or claims of any nature or description relating to system performance,
including coverage, buyer’s selection of products (including the Products) for
buyer’s application and/or failure of products (including the Products) to meet
government or regulatory requirements.



                                                                             17


Limitation of Liability
EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL UBIQUITI
OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE FOR DIRECT, SPECIAL,
INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES (INCLUDING LOST PROFIT,
LOST DATA, OR DOWNTIME COSTS), ARISING OUT OF THE USE, INABILITY TO USE,
OR THE RESULTS OF USE OF THE PRODUCT, WHETHER BASED IN WARRANTY,
CONTRACT, TORT OR OTHER LEGAL THEORY, AND WHETHER OR NOT ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES.

Note
Some countries, states and provinces do not allow exclusions of implied
warranties or conditions, so the above exclusion may not apply to you. You may
have other rights that vary from country to country, state to state, or province
to province. Some countries, states and provinces do not allow the exclusion
or limitation of liability for incidental or consequential damages, so the above
limitation may not apply to you. EXCEPT TO THE EXTENT ALLOWED BY LOCAL
LAW, THESE WARRANTY TERMS DO NOT EXCLUDE, RESTRICT OR MODIFY, AND
ARE IN ADDITION TO, THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE
LICENSE OF ANY SOFTWARE (EMBEDDED IN THE PRODUCT) TO YOU. The United
Nations Convention on Contracts for the International Sale of Goods shall not
apply to any transactions regarding the sale of the Products.




18


Compliance
FCC
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions.
1.   This device may not cause harmful interference, and
2.   This device must accept any interference received, including interference that may
     cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
  receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Operations of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
The airCube has been approved by the FCC under FCC ID: SWX-ACBISP

                                                                                          19


Industry Canada
CAN ICES-3(B)/NMB-3(B)
This Class B digital apparatus complies with Canadian CAN ICES-003.
To reduce potential radio interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more
than that permitted for successful communication.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
1.   This device may not cause interference, and
2.   This device must accept any interference, including interference that may cause
     undesired operation of the device.
The airCube has been approved by Industry Canada under IC: 6545A-ACBISP. The device
for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful
interference to co-channel mobile satellite systems.

CAN ICES-3(B)/NMB-3(B)
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Pour réduire le risque d’interférence aux autres utilisateurs, le type d’antenne et son gain
doivent être choisies de façon que la puissance isotrope rayonnée équivalente (PIRE) ne
dépasse pas ce qui est nécessaire pour une communication réussie.
Cet appareil est conforme à la norme RSS Industrie Canada exempts de licence norme(s).
Son fonctionnement est soumis aux deux conditions suivantes:
1.   Cet appareil ne peut pas provoquer d’interférences et
2.   Cet appareil doit accepter toute interférence, y compris les interférences qui peuvent
     causer un mauvais fonctionnement du dispositif.



20


Le airCube ont été approuvés par Industrie Canada en vertu IC: 6545A-ACBISP. Les
dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour
une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux
systèmes de satellites mobiles utilisant les mêmes canaux.

RF Exposure Warning
The antennas used for this transmitter must be installed to provide a separation distance
of at least 20 cm from all persons and must not be located or operating in conjunction
with any other antenna or transmitter.
Les antennes utilisées pour ce transmetteur doivent être installé en considérant une
distance de séparation de toute personnes d’au moins 20 cm et ne doivent pas être
localisé ou utilisé en conflit avec tout autre antenne ou transmetteur.

CE Marking
CE marking on this product represents the product is in compliance with all directives
that are applicable to it.




                                                                                            21


RoHS/WEEE Compliance Statement




English
European Directive 2012/19/EU requires that the equipment bearing this symbol on the
product and/or its packaging must not be disposed of with unsorted municipal waste.
The symbol indicates that this product should be disposed of separately from regular
household waste streams. It is your responsibility to dispose of this and other electric and
electronic equipment via designated collection facilities appointed by the government
or local authorities. Correct disposal and recycling will help prevent potential negative
consequences to the environment and human health. For more detailed information
about the disposal of your old equipment, please contact your local authorities, waste
disposal service, or the shop where you purchased the product.

Deutsch
Die Europäische Richtlinie 2012/19/EU verlangt, dass technische Ausrüstung, die direkt
am Gerät und/oder an der Verpackung mit diesem Symbol versehen ist, nicht zusammen
mit unsortiertem Gemeindeabfall entsorgt werden darf. Das Symbol weist darauf hin,
dass das Produkt von regulärem Haushaltmüll getrennt entsorgt werden sollte. Es liegt in
Ihrer Verantwortung, dieses Gerät und andere elektrische und elektronische Geräte über
die dafür zuständigen und von der Regierung oder örtlichen Behörden dazu bestimmten
Sammelstellen zu entsorgen. Ordnungsgemäßes Entsorgen und Recyceln trägt dazu bei,
potentielle negative Folgen für Umwelt und die menschliche Gesundheit zu vermeiden.
Wenn Sie weitere Informationen zur Entsorgung Ihrer Altgeräte benötigen, wenden Sie
sich bitte an die örtlichen Behörden oder städtischen Entsorgungsdienste oder an den
Händler, bei dem Sie das Produkt erworben haben.



22


Español
La Directiva 2012/19/UE exige que los equipos que lleven este símbolo en el propio
aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no
seleccionados. El símbolo indica que el producto en cuestión debe separarse de los
residuos domésticos convencionales con vistas a su eliminación. Es responsabilidad
suya desechar este y cualesquiera otros aparatos eléctricos y electrónicos a través de los
puntos de recogida que ponen a su disposición el gobierno y las autoridades locales. Al
desechar y reciclar correctamente estos aparatos estará contribuyendo a evitar posibles
consecuencias negativas para el medio ambiente y la salud de las personas. Si desea
obtener información más detallada sobre la eliminación segura de su aparato usado,
consulte a las autoridades locales, al servicio de recogida y eliminación de residuos de su
zona o pregunte en la tienda donde adquirió el producto.

Français
La directive européenne 2012/19/UE exige que l’équipement sur lequel est apposé
ce symbole sur le produit et/ou son emballage ne soit pas jeté avec les autres ordures
ménagères. Ce symbole indique que le produit doit être éliminé dans un circuit distinct
de celui pour les déchets des ménages. Il est de votre responsabilité de jeter ce matériel
ainsi que tout autre matériel électrique ou électronique par les moyens de collecte
indiqués par le gouvernement et les pouvoirs publics des collectivités territoriales.
L’élimination et le recyclage en bonne et due forme ont pour but de lutter contre l’impact
néfaste potentiel de ce type de produits sur l’environnement et la santé publique. Pour
plus d’informations sur le mode d’élimination de votre ancien équipement, veuillez
prendre contact avec les pouvoirs publics locaux, le service de traitement des déchets, ou
l’endroit où vous avez acheté le produit.




                                                                                         23


Italiano
La direttiva europea 2012/19/UE richiede che le apparecchiature contrassegnate
con questo simbolo sul prodotto e/o sull’imballaggio non siano smaltite insieme ai
rifiuti urbani non differenziati. Il simbolo indica che questo prodotto non deve essere
smaltito insieme ai normali rifiuti domestici. È responsabilità del proprietario smaltire
sia questi prodotti sia le altre apparecchiature elettriche ed elettroniche mediante le
specifiche strutture di raccolta indicate dal governo o dagli enti pubblici locali. Il corretto
smaltimento ed il riciclaggio aiuteranno a prevenire conseguenze potenzialmente
negative per l’ambiente e per la salute dell’essere umano. Per ricevere informazioni più
dettagliate circa lo smaltimento delle vecchie apparecchiature in Vostro possesso, Vi
invitiamo a contattare gli enti pubblici di competenza, il servizio di smaltimento rifiuti o il
negozio nel quale avete acquistato il prodotto.




24


Declaration of Conformity
български [Bulgarian]
С настоящото UBIQUITI NETWORKS декларира, че този тип радиосъоръжение
ACB-ISP е в съответствие с Директива 2014/53/ЕС. Цялостният текст на ЕС
декларацията за съответствие може да се намери на следния интернет адрес:
www.ubnt.com/compliance
Hrvatski [Croatian]
UBIQUITI NETWORKS ovime izjavljuje da je radijska oprema tipa ACB-ISP u skladu s
Direktivom 2014/53/EU. Cjeloviti tekst EU izjave o sukladnosti dostupan je na sljedećoj
internetskoj adresi: www.ubnt.com/compliance
Čeština [Czech]
Tímto UBIQUITI NETWORKS prohlašuje, že typ rádiového zařízení ACB-ISP je v souladu se
směrnicí 2014/53/EU. Úplné znění EU prohlášení o shodě je k dispozici na této internetové
adrese: www.ubnt.com/compliance
Dansk [Danish]
Hermed erklærer UBIQUITI NETWORKS, at radioudstyrstypen ACB-ISP er i overensstemmelse
med direktiv 2014/53/EU. EU‑overensstemmelseserklæringens fulde tekst kan findes på
følgende internetadresse: www.ubnt.com/compliance
Nederlands [Dutch]
Hierbij verklaar ik, UBIQUITI NETWORKS, dat het type radioapparatuur ACB-ISP conform is
met Richtlijn 2014/53/EU. De volledige tekst van de EU‑conformiteitsverklaring kan worden
geraadpleegd op het volgende internetadres: www.ubnt.com/compliance
English
Hereby, UBIQUITI NETWORKS declares that the radio equipment type ACB-ISP is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is
available at the following internet address: www.ubnt.com/compliance



                                                                                             25


Eesti keel [Estonian]
Käesolevaga deklareerib UBIQUITI NETWORKS, et käesolev raadioseadme tüüp ACB-ISP
vastab direktiivi 2014/53/EL nõuetele. ELi vastavusdeklaratsiooni täielik tekst on kättesaadav
järgmisel internetiaadressil: www.ubnt.com/compliance
Suomi [Finnish]
UBIQUITI NETWORKS vakuuttaa, että radiolaitetyyppi ACB-ISP on direktiivin 2014/53/EU
mukainen. EU‑vaatimustenmukaisuusvakuutuksen täysimittainen teksti on saatavilla
seuraavassa internetosoitteessa: www.ubnt.com/compliance
Français [French]
Le soussigné, UBIQUITI NETWORKS, déclare que l’équipement radioélectrique du type
ACB-ISP est conforme à la directive 2014/53/UE. Le texte complet de la déclaration UE de
conformité est disponible à l’adresse internet suivante: www.ubnt.com/compliance
Deutsch [German]
Hiermit erklärt UBIQUITI NETWORKS, dass der Funkanlagentyp ACB-ISP der Richtlinie
2014/53/EU entspricht. Der vollständige Text der EU‑Konformitätserklärung ist unter der
folgenden Internetadresse verfügbar: www.ubnt.com/compliance
Ελληνικά [Greek]
Με την παρούσα ο/η UBIQUITI NETWORKS, δηλώνει ότι ο ραδιοεξοπλισμός ACB-ISP πληροί
την οδηγία 2014/53/ΕΕ. Το πλήρες κείμενο της δήλωσης συμμόρφωσης ΕΕ διατίθεται στην
ακόλουθη ιστοσελίδα στο διαδίκτυο: www.ubnt.com/compliance
Magyar [Hungarian]
UBIQUITI NETWORKS igazolja, hogy a ACB-ISP típusú rádióberendezés megfelel a 2014/53/EU
irányelvnek. Az EU‑megfelelőségi nyilatkozat teljes szövege elérhető a következő internetes
címen: www.ubnt.com/compliance
Íslenska [Icelandic]
Hér með lýsir UBIQUITI NETWORKS yfir því að ACB-ISP er í samræmi við tilskipun
2014/53/ESB. Fullur texti ESB samræmisyfirlýsing er að finna á eftirfarandi netfangi:
www.ubnt.com/compliance

26


Italiano [Italian]
Il fabbricante, UBIQUITI NETWORKS, dichiara che il tipo di apparecchiatura radio ACB-ISP
è conforme alla direttiva 2014/53/UE. Il testo completo della dichiarazione di conformità UE è
disponibile al seguente indirizzo Internet: www.ubnt.com/compliance
Latvių kalba [Latvian]
Ar šo UBIQUITI NETWORKS deklarē, ka radioiekārta ACB-ISP atbilst Direktīvai
2014/53/ES. Pilns ES atbilstības deklarācijas teksts ir pieejams šādā interneta vietnē:
www.ubnt.com/compliance
Lietuvių kalba [Lithuanian]
Aš, UBIQUITI NETWORKS, patvirtinu, kad radijo įrenginių tipas ACB-ISP atitinka Direktyvą
2014/53/ES. Visas ES atitikties deklaracijos tekstas prieinamas šiuo interneto adresu:
www.ubnt.com/compliance
Malti [Maltese]
B’dan, UBIQUITI NETWORKS, niddikjara li dan it‑tip ta’ tagħmir tar‑radju ACB-ISP huwa
konformi mad‑Direttiva 2014/53/UE. Id‑dikjarazzjoni tal‑konformità tista’ tiġi kkonsultata
minn www.ubnt.com/compliance
Norsk [Norwegian]
UBIQUITI NETWORKS erklærer herved at utstyret ACB-ISP er i samsvar med direktiv
2014/53/EU. Den fulle teksten til EU‑samsvarserklæringen er tilgjengelig på følgende
internettadresse: www.ubnt.com/compliance
Polski [Polish]
UBIQUITI NETWORKS niniejszym oświadcza, że typ urządzenia radiowego ACB-ISP jest
zgodny z dyrektywą 2014/53/UE. Pełny tekst deklaracji zgodności UE jest dostępny pod
następującym adresem internetowym: www.ubnt.com/compliance
Português [Portuguese]
O(a) abaixo assinado(a) UBIQUITI NETWORKS declara que o presente tipo de equipamento
de rádio ACB-ISP está em conformidade com a Diretiva 2014/53/UE. O texto integral
da declaração de conformidade está disponível no seguinte endereço de Internet:
www.ubnt.com/compliance
                                                                                             27


Română [Romanian]
Prin prezenta, UBIQUITI NETWORKS declară că tipul de echipamente radio ACB-ISP este în
conformitate cu Directiva 2014/53/UE. Textul integral al declarației UE de conformitate este
disponibil la următoarea adresă internet: www.ubnt.com/compliance
Slovenčina [Slovak]
UBIQUITI NETWORKS týmto vyhlasuje, že rádiové zariadenie typu ACB-ISP je v súlade so
smernicou 2014/53/EÚ. Úplné EÚ vyhlásenie o zhode je k dispozícii na tejto internetovej
adrese: www.ubnt.com/compliance
Slovenščina [Slovenian]
UBIQUITI NETWORKS potrjuje, da je tip radijske opreme ACB-ISP skladen z Direktivo
2014/53/EU. Celotno besedilo izjave EU o skladnosti je na voljo na naslednjem spletnem
naslovu: www.ubnt.com/compliance
Español [Spanish]
Por la presente, UBIQUITI NETWORKS declara que el tipo de equipo radioeléctrico ACB-ISP
es conforme con la Directiva 2014/53/UE. El texto completo de la declaración UE de conformidad está
disponible en la dirección Internet siguiente: www.ubnt.com/compliance
Svenska [Swedish]
Härmed försäkrar UBIQUITI NETWORKS att denna typ av radioutrustning ACB-ISP överensstämmer med
direktiv 2014/53/EU. Den fullständiga texten till EU‑försäkran om överensstämmelse finns på följande
webbadress: www.ubnt.com/compliance




28




                                      www.ubnt.com

                                         Ubiquiti Networks, Inc.
                                      685 Third Avenue, 27th Floor
                                          New York, NY 10017
                                                  USA


©2017 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U
logo, the Ubiquiti beam logo, airMAX, and airCube are trademarks or registered trademarks of
Ubiquiti Networks, Inc. in the United States and in other countries. Apple, the Apple logo, and iPhone
are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark
of Apple Inc. Android, Google, Google Play, the Google Play logo and other marks are trademarks of
Google Inc. All other trademarks are the property of their respective owners.                          AJJL072817



Document Created: 2017-10-19 09:53:51
Document Modified: 2017-10-19 09:53:51

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC