Cover Letter Modular Approval Request

FCC ID: SUZ-PBM

Cover Letter(s)

Download: PDF

FCCID_1259038

FCC ID: SUZ-PBM

Modular Approval Request Letter

Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch

March 26, 2010

Dear Application Examiner,

Coretronic Corp., It’s a PointBlank Module, FCC ID: SUZ-PBM would like to have
your authorization as a modular device.

The requirements of section 15.212 of FCC rules have been met and shown on the
following statements.

1. “The modular transmitter must have its own RF shielding.”: The radio portion of
this module has been shielded, please see exhibition External Photo.

2. “The modular transmitter must have buffered modulation/data inputs.” The EUT
has buffered data inputs, it is integrated in chip CC250.

3. “The modular transmitter must have its own power supply regulation.” The part
number of this regulator is CC250.

4. “The modular transmitter must comply with the antenna requirements of section
15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The
spurious emission, unique antenna connector and photo of antennas are shown
in the test report.

5. “The modular transmitter must be tested in a stand-alone configuration” The EUT
was tested in a stand-alone configuration via an data cable extender. Please see
section Photographs of Test Configuration in the test report, the EUT was
plugged in this extender.

6. “The modular transmitter must be labeled with its own FCC ID number.” Please
see exhibition Label Sample for the FCC ID of this module. And also in the
exhibition Users Manual, there are instructions give to the OEM on how to label
the end product.

Report No.: RF990222L04

Document Created: 2010-03-26 14:59:56
Document Modified: 2010-03-26 14:59:56

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC