User manual

FCC ID: SU3RMWIFIC

Users Manual

Download: PDF
FCCID_4327999

RAE Systems by Honeywell RMWIFIC User Manual Document Information Info Content Author(s) Revision 1.0 Document Status Draft Date 2019-5-16 Distribution Approvals Name Date Signature Copyright © 2019 Honeywell Analytics, All rights reserved. Revision3 Page 1 of 8

RAE Systems by Honeywell Release Histroy Rev. Date Author Descripition 1.0 2019-5-16 FengJunjie Initial draft Copyright © 2019 Honeywell Analytics, All rights reserved. Revision3 Page 2 of 8

RAE Systems by Honeywell Contents 1. Overview: ........................................................................................................................................ 4 1.1 Modem Overview:............................................................................................................... 4 1.2 Key Features: ...................................................................................................................... 4 2. Modem Pin Definitions: ................................................................................................................... 4 2.1 Block Diagram:.................................................................................................................... 4 2.2 Pin map: .............................................................................................................................. 5 3. Specifications .................................................................................................................................. 5 3.1 Physical Characteristics: ..................................................................................................... 5 3.2 Power supplier (powered by host PCBAs): ........................................................................ 6 3.3 RF specification: ................................................................................................................... 6 4. Regulatory ...................................................................................................................................... 7 Copyright © 2019 Honeywell Analytics, All rights reserved. Revision3 Page 3 of 8

RAE Systems by Honeywell 1. Overview: 1.1 Modem Overview: The RMWIFIC is a highly-integrated WIFI module, which offers a complete solution containing all hardware features necessary for development of wireless application. The RMWIFIC is a device with the feature of 802.11b/g/n that works with most of the wireless router in market. 1.2 Key Features:  Ultra-compact size (18.8 x 13.5mm)  UART interfaces  High data rate  DSSS; CCK and OFDM modulation for 802.11b/g/n  RoHS compliant 2. Modem Pin Definitions: 2.1 Block Diagram: Copyright © 2019 Honeywell Analytics, All rights reserved. Revision3 Page 4 of 8

RAE Systems by Honeywell 2.2 Pin map: 3. Specifications 3.1 Physical Characteristics: Parameter Unit 18.8*13.5 mm Dimension -40 to +55 ℃ Operation temperature Below diagram shows the PCB layout. Copyright © 2019 Honeywell Analytics, All rights reserved. Revision3 Page 5 of 8

RAE Systems by Honeywell 3.2 Power supplier (powered by host PCBAs): Symbol Min Typ Max Unit 1.9V 1.85 1.9 2.0 V 3.3 RF specification: Test condition Min typ Max Unit Frequency Range 2412 2462 MHz TX power 18 dBm 802.11b:8% PER -96 Rx sensitivity 802.11g:10% PER -90.5 dBm 802.11n:10% PER -74.5 Bandwidth 20 MHz Copyright © 2019 Honeywell Analytics, All rights reserved. Revision3 Page 6 of 8

RAE Systems by Honeywell 4. Regulatory Caution: This device complies with Part 15 of the FCC Rules / Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. Copyright © 2019 Honeywell Analytics, All rights reserved. Revision3 Page 7 of 8

RAE Systems by Honeywell —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. Copyright © 2019 Honeywell Analytics, All rights reserved. Revision3 Page 8 of 8


Document Created: 2019-05-16 16:30:45
Document Modified: 2019-05-16 16:30:45
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC