SAR REPORT APPENDIX C PART 2

FCC ID: STZSRP9170UW

RF Exposure Info

Download: PDF
FCCID_1857788

Calibration Laboratory of @g Schweizeischer Kalibrierdionst Schmid & Partner _ Service sulsse itétalonnage Engineering AG Servizio svizzoro d tarsturn Zeughausstrasse 43,8004 Zurich, Switzerland 8. swies Caltration Srvce Accredted by the Swiss Accreditaion Service (SAS) Accreditation No.: SCS 108 ‘Tre Siss Accreditation Service is one of the signatories o the EA MultLateral Agreement for the recognition of calbration certiicates Client EMC Technologies Certiiate No: D45OV3—1074_Nov10 CALIBRATION CERTIFICATE Object D450V3 — SN: 1074 Catiraton procedure(s) OA CAL—15.15 Calibration Procedure for dipole validation kits below 800 MHz Cattraton date November 30, 2010 This caltration contfeate docurrents thtraceabiity to natonalstandards, which reaize he physical unof measurements (5) "The measurements and tuncerainies wth caniddence probabity are given on the folowing pages and are par ofthe cortfcate. Allealbratons have been condusted in the losed aboratory facit: envionment emparature(2x 3)°C and hurmiity <70% Galbraton Equipment used (WATE crticalforcaltraton) Primary Standards o# Cal Date (Galtrated by. Cortfcato No) Schoduled Calbraton Poner meter E44108 ostzsoure +—Apr—10 (No.217.01130) Apet1 Power sensor Et 2A mvaraoser? 1—A010 (No.217.01130) Apett Poer sensor E4tA marasooer I—Apet0 (No.217.0r130) Reference 3 d Attencator sh: ssose 0) 30Mer—10 (io. 217.0r150) Reference 20 49 Ateruator sh: ssoee (eon) 30er—t0 (io. 217.0rt01) TyseN mismatch cominaton Sh: sorra/ osser so.mer—10 (io. 217—0rtee) Raterence Probe ET3DV$ sn: tsor 30—Apr—10 (No. E3—1807.Apric) vaee sicese 23—pe10 (No. DAEE05tAprio) Secondary Standarts n« neck Date (nthouse) Scheduled Check AF generator HP 26480 usseeeuot700 04—209—99 (n house check 0ct0%) in house checkOc—11 Network Analyzer HP a7so€ ussraatses $4208 18.Oct01 (nhouse checkOct10) In house check: Oc—t1 Name Functon Signature Cattrated by: Joton Kastrat Laboratoy Techrician W/ Approved by Techrical Managor essm Issued November 80, 2010 "This catbation ceriicate shall ot b reproduced excogt in ful without witten agproval o he laboratan. Certficate No: D4S0V3—1074_Nov10 Page 1 of 6 srnmto w

Calibration Laboratory of . Sehwelzerischer Kallbrerdionst Schmid & Partner Service sulsse d‘étionnage Engineering AG C dervicisastzzers alteatire Zeughausstrasse 43, 8004 Zurich, Suitzerland S swiss Calibration Service Aceredted by the Swiss Aceredtaion Sorvice (GAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one ofthe ignatoriesto the EA Mullfaterat Agreemantfor the recognition of cabration coticates Glossary: TSL tissue simulating liquid ConF sensitivity in TSL / NORM xy,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2003, ‘IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques®, December 2003 IEC 62209—1, *Procedure to measure the Specific Absorption Rate (SAR) for hand—held £ devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)‘, February 2005 c) Federal Communications Commission Office of Engineering & Technology (FCC OET), "Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields; Additional Information for Evaluating Compliance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiofrequency Emissions", Supplement C (Edition 01—01) to Bulletin 65 Additional Documentation: d) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: * Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. * Antenna Parameters with TSL: The dipole is mounted with the spacer to position it feed point exactly below the center marking of the flat phantom section, with the arms oriented parallel to the body axis. * Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned underthe liquid filed phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. * Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. * SAR measured: SAR measured at the stated antenna input power. * SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. + SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. Certficate No: D4soV3—t074_Novio Page 2 of 6

Measurement Conditions DASY system contiquration, as far as not iven on page 1 DASY Version basys vsee Extrapolation Advanced Extrapolation Phantom ELi Flat Phantom Shelthickness: 2 «0.2 mm Distance Dipole Center — TSL 15 mm with Spacer Area Scan Resolution d, dy = 15 mm Zoom Scan Resolution d, dy, dz =5 mm Frequency 450 MHz + 1 MHz Head TSL parameters The following parameters and calculations were applied. Temporature Pormittivity Conductivity Nominal Head TSL parameters 220°C ass 0.87 mho/m Measured Head TSL parameters geo02)°C 43616% 0.83 mom=6% Head TSL temporature during test @ges02)°C — SAR result with Head TSL SAR averaged over 1 em° (1 g) of Head TSL condition SAR measured 208 mW input power 1.79 mW /g SAR normalized normalized to 1W 4.50 mW / g SAF for nomina! Head TSL parameters normalized to 1W 4.60 mW / g = 18.1 % (c=2) SAR averaged over 10 em" (10 g) of Head TL conditin SAR measured 898 mW input power 1.20 mW /g SAR normalized normalized to 1W 302 mW /g SAfor nomina! Head TSL parameters normalized to 1W 3.11 mW / g « 17.6 % (c=2) Certficate No: D450V3—1074_Nov1 Page 3 of 6

Appendix Antenna Parameters with Head TSL Impedance, transformed to feed point 56.2 O — 4.6 jQ Return Loss — 22.8 dB General Antenna Parameters and Design Electrical Delay (one direction) 1.354 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Manufactured on June 24, 2010 Certificate No: D450V3—1074_Nov10 Page 4 of 6 NATA nevorcorern c rvueren imce w carnrgzim ror av eereriarein rvvaeg uie ui anre uen verren o un tvounrigy verimer eraiii e on m esns n n e es se Accrestanon No. sise eeee nn en ene n memern ne n hn n en mt e en e en n w

DASY5 Validation Report for Head TSL Date/Time: 30.11.2010 12:57:56 Test La boratory: SPEAG DUT: Dipole 450 MHz; Type: D450V3; Serial: D450V3 — SN:1074 Communication System: CW; Frequency: 450 MHz; Duty Cyele: 1:1 Medium: HSL450 Medium parameters used: f = 450 MHz; 0 =0.83 mho/m; £ = 43.6; p = 1000 kg/m‘ Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/TEC/ANSI C63.19—2007) DASY3 Configuration: Probe: ETIDV6— SNIS07; ConvR.2, 7.2, 7.2; C Mbrared: 30.04.2010 SensorSurface:4mm(Mechanical Surface Detection) Electronics: DAFS4 Sn6S4; Calibrted: 23.04.2010 Phantom: EL1 4.0; Type: QDOVAOOIBA; Seria: 1002 Measurement SW DASYS2, V52.2 Build 0, Version 52.2.0 (163) Postprocessing SW: SEMCAD X, V14.2 Build 2, Version 14.2.2 (1685) Pin=398mW /d=15mm /Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=3mm, dz=3mm Reference Value = 49.7 V/m; PowerDrift =—0.023 dB Peak SAR (extrapolated) = .75 We SAR(I g) = 1.79 mWi/g: SAR(1O g) 1.2 mW/g Maximum value of SAR (measured) 1.91 mW/g 0 dB = 1.91mW/g Certficate No: D4S0V3—1074_Nov10 Page 5 of 6 rrnme w

Report No.: M121040F Page 72 of 78 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full.

Report No.: M121040F Page 73 of 78 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full.

Calibration Laboratory of Schweizerischer Kalibriardionst Schmid & Partner Service suisse d‘étalonnage Engineering AG Servizlo svizzero dltaratura Zeughausstrasse 43, 004 Zurich, Switzerland Sss Calloration Service Accredied by ho Sufes Accredtaton Sorvice (GAS) Accreditation No.: SCS 108 "The Swiss Accredtation Serviceis one ofthe signataris to the EA MultJateral Agreement for the recognition ofcallbration cartfates Cliem. EMC Technologies Corificate No: DAE—442_Dec11 CALIBRATION CERTIFICATE Object DAE3 — SD 000 D03 AE — SN: 442 Calibation procedire(s) QA CAL—06v28 Calibration procedure for the data acquisition electronics (DAE) Calbraton date: December 5, 2011 This calbration cenifeate dacumentsthe trceabiity to naional standards, which reatze the physicauns of mensurements (S) "The measurementsand the uncerainties wih confience probabity aregiven on the alovingpages and are parol the coriicate. Allealbratons have been conducted in the closed aboratafaciiy: anvronment temporature(22 3)°C and humidiy « 70%. Callbation Equipment used (MBTE criical focalbraton) Pimary Standards PB Cal Date (Gorticate No.) Scheduled Caltraton Kelthley Mutimeter Type 2001 |SN: ogrozre 2680511 (No:t1e50) Sepr2 Secondary Standards n« Check Date in house) _ Scheduled Check Callbator Box Vi1 se Uo06 AB 1008 OB—Jun—t1 (n house checl) in house chedic Jur—12 Name Function Calbrated by Andres Gurt Techrician Approved by Fin Bomot A& Direstor Issued: DecermberS, 2011 "This callation contieate shalns be reproduced exceptin ful wihout writen approval f the labortoy Certficate No: DAES—442_Dect 1 Page 1 ot5

Calibration , Laboratory of . SehwelzerischorKalbrerdionst Schmid & Partner c sulsse diétalonnage Engineering AG Servizlo svizzero dl uratura Zeughausstrasse 43, 6004 Zurich, Swtzorland $ swiss Caltpration Service Accredted by the Swise Accredtaion Sonico (GAS) Acereditation No.: SCS 108 The Sss Accreditation Service is one ofthe signators to the EA Multfateral Agroement for the recagnition of callration cortficates Glossary DAE data acquisition electronics Connector angle information used in DASY system to align probe sensor X to the robot coordinate system. Methods Applied and Interpretation of Parameters * DC Voltage Measurement: Calibration Factor assessed for use in DASY system by comparison with a calibrated instrument traceable to national standards. The figure given corresponds to the full scale range of the voltmeter in the respective range. * Connector angle: The angle of the connector is assessed measuring the angle mechanically by a tool inserted. Uncertainty is not required. * The following parameters as documented in the Appendix contain technical information as a result from the performancetest and require no uncertainty. * DC Voltage Measurement Linearity: Verification of the Linearity at +10% and —10% of the nominal calibration voltage. Influence of offset voltage is included in this measurement. * Common mode sensitivity: Influence of a positive or negative common mode voltage on thedifferential measurement. * Channel separation: Influenceof a voltage on the neighbor channels not subject to an input voltage. * AD Converter Values with inputs shorted: Values on the internal AD converter corresponding to zero input voltage * Input Offset Measurement: Output voltage and statistical results over a large number of zero voltage measurements. * Input Offset Current: Typical value for information; Maximum channel input offset current, not considering the input resistance. * Input resistance: Typical value for information: DAE input resistance at the connector, during internal auto—zeroing and during measurement. * Low Battery Alarm Voltage: Typical value for information. Below this voltage, a battery alarm signal is generated. * Power consumption: Typical value for information. Supply currents in various operating modes. Cortficate No: DAES—442_Dect1 Page 2 of 5

DC Voltage Measurement A/D — Converter Resolution nominal High Range: 1LSB= 6.1uV , full range = —100...+300 mV Low Range: 1LSB= 6inv , full range = ~1.......+3mV DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 sec Calibration Factors X Y¥ Z High Range 404.367 + 0.1% (k=2) 405.009 + 0.1%(k=2) 405.229 + 0.1% (k=2) Low Range 3.98363 + 0.7% (k=2) 3.98114 +0.7% (k=2) 3.98948 + 0.7% (k=2) Connector Angle Connector Angle to be used in DASY system 57.0°%#1° Certificate No: DAE3—442_Dec11 Page 3 of 5 NATA nevorcorern c rvueren imce w carnrgzim ror av eereriarein rvvaeg uie ui anre uen verren o un tvounrigy verimer eraiii e on m esns n n e es se Accrestanon No. sise eeee nn en ene n memern ne n hn n en mt e en e en n w

Appendix 1. DC Voltage Linearity High Range Reading (1V) Difference (x¥) Error (%) Channel X _ _+ Input 2000022 005 0.00 ChannelX____+ input 20000.16 066 0.00 Channel X___— input —19097.14 280 ao1 Channel Y + input 2000088 215 000 Channel Y +input 19900.72 208 001 Channel Y — input —19908.02 o8 000 ChannelZ + input 2000085 080 000 ChannelZ + input 20000.01 00 000 Channel 2 — Input —19998.00 1.90 001 Low Range Reading (1¥) Difference (1V) Error (%) Channel X____+ Input 19008 0.20 ao1 Channel X____+ Input 200.22 022 on Channel X — Input —198.99 1.01 0.50 Channel Y _ _+ input 20006 004 005 Channel Y _ _+ input 190.0 051 026 Channel Y — input 200.74 o8 o42 Channel 2 _ _+ input 2000.0 ona 001 Channel2 + Input 19871 120 ass Channel Z —Input —200.84 —0.94 047 2. Common mode sensitivity DASY measurement parameters: Auto Zero Time: 3 soc; Measuring tme: 3 seo Common mode High Range Low Range Input Voitage (mV) Average Reading (1V) Average Reading (1V) Channel x 200 .70 1083 ~200 ma1 10.05 Channel Y 200 oo1 ost —200 437 —176 Channel Z 200 see 459 —200 208 aze 3. Channel separation DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 see Input Voltage (mV) Channel X (4V) Channel Y (uV) Channel Z (uV) Channel x 200 176 472 Channel Y 200 175 — 174 Channel 2 200 200 048 — Certficate No: DAES—442_Dect1 Page 4 of $

Report No.: M121040F Page 78 of 78 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full.


Document Created: 2012-11-29 13:17:16
Document Modified: 2012-11-29 13:17:16
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC