Test report Bluetooth - HR1956-2 plots

FCC ID: SSVNAEPI02

Test Report

Download: PDF
FCCID_4191800

Annex 1: Measurement diagrams to PARTIAL T E S T R E P O R T No.: 18-1-0210201T03a According to: FCC Regulations Part 15.205, Part 15.209, Part 15.247 ISED-Regulations RSS-Gen, Issue 5, RSS-247, Issue 2 for Miele & Cie. KG Wireless Food Probe System (Host: HR1956-2) Contains FCC ID: SSVNAEPI02 Contains ISED: 5669B-NAEPI02 Laboratory Accreditation and Listings Accredited EMC-Test Laboratory accredited according to DIN EN ISO/IEC 17025 CETECOM GmbH Laboratory Radio Communications & Electromagnetic Compatibility Im Teelbruch 116 • 45219 Essen • Germany Registered in Essen, Germany, Reg. No.: HRB Essen 8984 Tel.: + 49 (0) 20 54 / 95 19-954 • Fax: + 49 (0) 20 54 / 95 19-964 E-mail: info@cetecom.com • Internet: www.cetecom.com Page 1 of 21 The test results relate only to the individual items that have been tested. This report shall not be reproduced in parts without the written approval of the testing laboratory © Copyright: All rights reserved by CETECOM

Annex 1 to Test Report 18-1-0210201T03a, Page 2 of 21 TABLE OF CONTENTS: 1. CONDUCTED EMISSIONS ON AC-POWER LINES ............................................................................................................................ 3 2. CONDUCTED MEASUREMENTS ........................................................................................................................................................... 4 2.1. Conducted Power .................................................................................................................................................................................... 4 2.2. Time of Channel Occupancy................................................................................................................................................................... 7 3. RADIATED FIELD STRENGTH MEASUREMENTS.......................................................................................................................... 13 3.1. Radiated Field Strength Emissions - 9kHz to 30MHz........................................................................................................................... 13 3.2. Radiated Field Strength Emissions - 30MHz to 1GHz .......................................................................................................................... 14 3.3. Radiated Field Strength Emissions - 1GHz to 18GHz .......................................................................................................................... 15 3.4. Radiated Field Strength Emissions - 18GHz to 26.5GHz ..................................................................................................................... 17 3.5. Radiated Band-Edge Measurements ..................................................................................................................................................... 18 CETECOM_TR18-1-0210201T03a-A1

Annex 1 to Test Report 18-1-0210201T03a, Page 3 of 21 1. Conducted emissions on AC-Power lines 1.01 Common Information Test Description: Conducted Voltage Measurement Class B Test Site & Location: Conducted Emission, CETECOM GmbH Düsseldorf Test Software: R&S EMC32 v9.15 Test Specification: FCC 15.207 , RSS 247 Operating Mode: Oven heating up Measured on line: 120V AC N/L1 Diagram details: Shows the peak values as a sum of measured ports in maxhold mode Environmental Conditions: Temperature: 20.5°C; Pressure: 997hPa; Huminity: 45% Operator: MAh EUT Information Manufacturer: Miele &Cie KG EUT Model: HR1956-2 HW: Pre Production B0 Series SW; Pre Production B0 Series Serial Nr.: 153703216 Level in dBµV Frequency QuasiPeak Average Limit Margin Meas. Bandwidth Line PE Corr. (MHz) (dBµV) (dBµV) (dBµV) (dB) Time (kHz) (dB) (ms) 1.002000 40.84 --- 56.00 15.16 1000.0 9.000 L1 GND 0.2 1.248000 42.01 --- 56.00 13.99 1000.0 9.000 N GND 0.2 11.826000 --- 16.88 50.00 33.12 1000.0 9.000 N GND 0.7 11.826000 29.66 --- 60.00 30.34 1000.0 9.000 N GND 0.7 15.687000 47.90 --- 60.00 12.10 1000.0 9.000 L1 GND 0.9 15.687000 --- 37.80 50.00 12.20 1000.0 9.000 L1 GND 0.9 CETECOM_TR18-1-0210201T03a-A1

Annex 1 to Test Report 18-1-0210201T03a, Page 4 of 21 2. Conducted Measurements 2.1. Conducted Power Peak output power (Sweep) (2401,62 MHz; 20,000 dBm; 133 kHz; Test Mode) Test according to FCC title 47 part 15 §15.247(b), ANSI C63.10 Measurement uncertainty calculated in accordance with ETSI TR 100 028-1. Expanded Combined Uncertainty of absolute Level Measurement (K=2) < 1 dB Result DUT Frequency Peak Power Limit Max Result (MHz) (dBm) (dBm) 2401.620000 20.8 21.0 PASS Level in dBm CETECOM_TR18-1-0210201T03a-A1

Annex 1 to Test Report 18-1-0210201T03a, Page 5 of 21 Peak output power (Sweep) (2441,38 MHz; 20,000 dBm; 133 kHz; Test Mode) Test according to FCC title 47 part 15 §15.247(b), ANSI C63.10 Measurement uncertainty calculated in accordance with ETSI TR 100 028-1. Expanded Combined Uncertainty of absolute Level Measurement (K=2) < 1 dB Result DUT Frequency Peak Power Limit Max Result (MHz) (dBm) (dBm) 2441.380000 20.0 21.0 PASS Level in dBm CETECOM_TR18-1-0210201T03a-A1

Annex 1 to Test Report 18-1-0210201T03a, Page 6 of 21 Peak output power (Sweep) (2481,28 MHz; 20,000 dBm; 133 kHz; Test Mode) Test according to FCC title 47 part 15 §15.247(b)and ANSI C63.10 Measurement uncertainty calculated in accordance with ETSI TR 100 028-1. Expanded Combined Uncertainty of absolute Level Measurement (K=2) < 1 dB Result DUT Frequency Peak Power Limit Max Result (MHz) (dBm) (dBm) 2481.280000 2.2 21.0 PASS Level in dBm CETECOM_TR18-1-0210201T03a-A1

Annex 1 to Test Report 18-1-0210201T03a, Page 7 of 21 2.2. Time of Channel Occupancy 2.2.1. Low Channel DWelltime_low Channel DWelltime_low Channel_300ms Sweep CETECOM_TR18-1-0210201T03a-A1

Annex 1 to Test Report 18-1-0210201T03a, Page 8 of 21 DWelltime_low_Channel_1s_Sweep DWelltime_low_Channel_24s_Sweep CETECOM_TR18-1-0210201T03a-A1

Annex 1 to Test Report 18-1-0210201T03a, Page 9 of 21 2.2.2. Mid Channel DWelltime_mid Channel DWelltime_midChannel_300ms_Sweep CETECOM_TR18-1-0210201T03a-A1

Annex 1 to Test Report 18-1-0210201T03a, Page 10 of 21 DWelltime_mid_Channel_1s_Sweep DWelltime_mid_Channel_24s_Sweep CETECOM_TR18-1-0210201T03a-A1

Annex 1 to Test Report 18-1-0210201T03a, Page 11 of 21 2.2.3. High Channel DWelltime_high Channel DWelltime_high Channel_300ms_Sweep CETECOM_TR18-1-0210201T03a-A1

Annex 1 to Test Report 18-1-0210201T03a, Page 12 of 21 DWelltime_highChannel_1s_Sweep DWelltime_highChannel_24s_Sweep CETECOM_TR18-1-0210201T03a-A1

Annex 1 to Test Report 18-1-0210201T03a, Page 13 of 21 3. Radiated Field Strength Measurements 3.1. Radiated Field Strength Emissions - 9kHz to 30MHz 2.01 Common Information Test description: Magnetic Field Strength Measurement related to 30/300 m distance Test site and distance: Ref.-Nr. 441 Semi Anechoic Room (SAR) with 3 m measurement distance Test Location Cetecom GmbH Düsseldorf Version of Testsoftware: EMC32 V9.25.0 Rec. antenna (pre-scan): height 1.00 m, parallel and 90° to EUT polarisation Test specification: FCC 15.205 § 15.209; RSS-Gen: Issue 5 Operator: MAh Operating conditions: Oven heating up, TX-on, Ch low Power during tests: 120V AC EUT Information Manufacturer: Miele & Cie KG EUT Model: HR1956-2 HW: Pre Production B0 Series SW; Pre Production B0 Series Serial Nr.: 153703216 Level in dBµV/m CETECOM_TR18-1-0210201T03a-A1

Annex 1 to Test Report 18-1-0210201T03a, Page 14 of 21 3.2. Radiated Field Strength Emissions - 30MHz to 1GHz 3.01 Common Information Test description: Electric Field Strength Measurement Test site and distance: Ref.-Nr. 441 Semi Anechoic Chamber 2 (SAC5) with 3m measurement distance Test location: CETECOM GmbH Düsseldorf Version of Testsoftware: EMC32 V9.25.0 Test specification: FCC15.109, class B; RSS-Gen.: Issue 5 Measured sides of EUT: front, right, rear, left Environmental Conditions: Temperature: 20.5°C; Pressure: 997hPa; Huminity: 45% Operator: MAh Operating conditions: Oven heating up, TX-on, Ch low, Power during tests: 120V AC EUT Information Manufacturer: Miele & Cie KG EUT Model: HR1956-2 HW: Pre Production B0 Series SW; Pre Production B0 Series Serial Nr.: 153703216 Level in dBµV/m Final_Result Frequency QuasiPeak Limit Margin Bandwidth Height Pol Azimuth Corr. (MHz) (dBµV/m) (dBµV/m) (dB) (kHz) (cm) (deg) (dB) 96.348000 29.23 43.50 14.27 120.000 100.0 V 80.0 11.3 129.992000 33.80 43.50 9.70 120.000 104.0 V 23.0 11.5 149.992000 34.55 43.50 8.95 120.000 100.0 V 272.0 10.0 444.000000 24.05 46.00 21.95 120.000 113.0 V 355.0 16.3 CETECOM_TR18-1-0210201T03a-A1

Annex 1 to Test Report 18-1-0210201T03a, Page 15 of 21 3.3. Radiated Field Strength Emissions - 1GHz to 18GHz 4.01a Common Information Test description: Electric Field Strength Measurement Test site and distance: Ref.-Nr. 441 Semi Anechoic Chamber 2 (SAC5) with 3m measurement distance Test location: CETECOM GmbH Düsseldorf Version of Testsoftware: EMC32 V9.25.0 Test specification: FCC15.209 / RSS-Gen Issue 5 Measured sides of EUT: front, right, rear, left Height 100-250 Used filter: none up to 3GHz / High Pass from 3GHz Environmental Conditions: Temperature: 20.5°C; Pressure: 997hPa; Huminity: 45% Operator: MAh Operating conditions: Oven heating up, TX-on, Ch low, Power during tests: 120V AC EUT Information Manufacturer: Miele & Cie KG EUT Model: HR1956-2 HW: Pre Production B0 Series SW; Pre Production B0 Series Serial Nr.: 153703216 Level in dBµV/m CETECOM_TR18-1-0210201T03a-A1

Annex 1 to Test Report 18-1-0210201T03a, Page 16 of 21 4.01b Common Information Test description: Electric Field Strength Measurement Test site and distance: Ref.-Nr. 441 Semi Anechoic Chamber 2 (SAC5) with 3m measurement distance Test location: CETECOM GmbH Düsseldorf Version of Testsoftware: EMC32 V9.25.0 Test specification: FCC15.209 / RSS-Gen Issue 5 Measured sides of EUT: front, right, rear, left Used filter: none up to 3GHz / High Pass from 3GHz Environmental Conditions: Temperature: 20.5°C; Pressure: 997hPa; Huminity: 45% Operator: MAh Operating conditions: Oven heating up, TX-on, Ch low, Power during tests: 120V AC EUT Information Manufacturer: Miele & Cie KG EUT Model: HR1956-2 HW: Pre Production B0 Series SW; Pre Production B0 Series Serial Nr.: 153703216 Level in dBµV/m Final_Result Frequency MaxPeak Limit Margin Meas. Time Bandwidth Azimuth Corr. (MHz) (dBµV/m) (dBµV/m) (dB) (ms) (kHz) (deg) (dB) 4803.233333 53.70 74.00 20,3 100.0 1000.000 -35.0 -15.5 7204.855000 48.00 74.00 26,00 100.0 1000.000 110.0 -10.9 14409.695000 51.91 74.00 22,09 100.0 1000.000 0.0 3.9 Final_Result Average Frequency MaxPeak DC Avg Limit Margin (MHz) (dBµV/m) (dB) (dBµV/m) (dBµV/m) (dB) 4803.233 55.51 28,76 24,94 54,00 29,06 7204.855 54.33 28,76 19,24 54,00 34,76 14409.695 61.60 28,76 23,15 54,00 30,85 CETECOM_TR18-1-0210201T03a-A1

Annex 1 to Test Report 18-1-0210201T03a, Page 17 of 21 3.4. Radiated Field Strength Emissions - 18GHz to 26.5GHz 4.01c CETECOM_TR18-1-0210201T03a-A1

Annex 1 to Test Report 18-1-0210201T03a, Page 18 of 21 3.5. Radiated Band-Edge Measurements 3.5.1. Low Channel 2402.5 MHz (2.4 GHz ISM: left band edge) 9.01a Common Information Test description: Band-Edge Electric Field Strength Measurement related to 3m distance Test site and distance: Ref.-Nr. 441x Semi Anechoic Chamber (SAC5) with 3m measurement distance Test Location: CETECOM GmbH Düsseldorf Version of Testsoftware: EMC32 V10.0.0 Test specification: FCC15.209 / RSS-Gen Issue 5 Distance correction: none Operating Mode: Channel low, Non Hopping Mode on Used filter: none Power during test: 120V AC 60 Hz Measured side(s): front, right, rear, left Operator: MAh Level in dBµV/m CETECOM_TR18-1-0210201T03a-A1

Annex 1 to Test Report 18-1-0210201T03a, Page 19 of 21 9.02a Common Information Test description: Band-Edge Electric Field Strength Measurement related to 3m distance Test site and distance: Ref.-Nr. 441x Semi Anechoic Chamber (SAC5) with 3m measurement distance Test Location: CETECOM GmbH Düsseldorf Version of Testsoftware: EMC32 V10.0.0 Test specification: FCC15.209 / RSS-Gen Issue 5 Distance correction: none Operating Mode: Channel low, Hopping Mode on Used filter: none Power during test: 120V AC 60 Hz Measured side(s): front, right, rear, left Operator: MAh CETECOM_TR18-1-0210201T03a-A1

Annex 1 to Test Report 18-1-0210201T03a, Page 20 of 21 3.5.2. High Channel 2471.5 MHz ( 2.4 GHz ISM: right band edge) 9.01b Common Information Test description: Band-Edge Electric Field Strength Measurement related to 3m distance Test site and distance: Ref.-Nr. 441x Semi Anechoic Chamber (SAC5) with 3m measurement distance Test Location: CETECOM GmbH Düsseldorf Version of Testsoftware: EMC32 V10.0.0 Test specification: FCC15.209 / RSS-Gen Issue 5 Distance correction: none Operating Mode: Channel high, non Hopping Mode on, Used filter: none Power during test: 120V AC 60 Hz Measured side(s): front, right, rear, left Operator: MAh Level in dBµV/m CETECOM_TR18-1-0210201T03a-A1

Annex 1 to Test Report 18-1-0210201T03a, Page 21 of 21 9.02b Common Information Test description: Band-Edge Electric Field Strength Measurement related to 3m distance Test site and distance: Ref.-Nr. 441x Semi Anechoic Chamber (SAC5) with 3m measurement distance Test Location: CETECOM GmbH Düsseldorf Version of Testsoftware: EMC32 V10.0.0 Test specification: FCC15.209 / RSS-Gen Issue 5 Distance correction: none Operating Mode: Channel high, Hopping Mode on, Used filter: none Power during test: 120V AC 60 Hz Measured side(s): front, right, rear, left Operator: MAh Level in dBµV/m CETECOM_TR18-1-0210201T03a-A1


Document Created: 2019-02-08 15:33:43
Document Modified: 2019-02-08 15:33:43
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC