unii device declaration letter

FCC ID: SS4SF550

Cover Letter(s)

Download: PDF
FCCID_2914139

Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 UNII Device Declaration Letter To whom it may concern: We have declared below featured for FCC equipment authorization, Device FCC ID: SS4SF550 (1) DFS Device: Master Client with Radar detection capability N/A Client without radar detection capability, (2) Active / Passive Scanning , adhoc mode access point capability Frequency Band Active Scanning (the passive scanning Ad Hoc Mode Access point (MHz) device can transmit a (where the device is capability capability probe (beacon)) can listen only with no probes) 2412-2462 Yes No Yes No Yes No Yes No 5745-5825 Yes No Yes No Yes No Yes No 5775-5775 Yes No Yes No Yes No Yes No 5755-5795 Yes No Yes No Yes No Yes No 5180-5240 Yes No Yes No Yes No Yes No 5190-5230 Yes No Yes No Yes No Yes No 5210-5210 Yes No Yes No Yes No Yes No (3) Country code selection ability Yes No If no, pls explain how it was implemented: (4) Meet 15.202 requirement Yes No pls check below : A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. (5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non- DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by end user or an installer. Apply Does not apply (If apply, pls help to provide explanation on it was implement, and how software was controlled)


Document Created: 2016-02-20 11:38:26
Document Modified: 2016-02-20 11:38:26
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC