RF Exposure

FCC ID: SS3-U11X1710

RF Exposure Info

Download: PDF
FCCID_3720625

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG171013002-00A FCC §15.407 (f) & §1.1310 & §2.1091- MAXIMUM PERMISSIBLE EXPOSURE (MPE) Applicable Standard According to subpart 15.407(f)and subpart §1.1310, systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091) (B) Limits for General Population/Uncontrolled Exposure Frequency Range Electric Field Magnetic Field Power Density Averaging Time (MHz) Strength (V/m) Strength (A/m) (mW/cm2) (minutes) 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f²) 30 30–300 27.5 0.073 0.2 30 300–1500 / / f/1500 30 1500–100,000 / / 1.0 30 f = frequency in MHz; * = Plane-wave equivalent power density; According to §1.1310 and §2.1091 RF exposure is calculated. Calculation formula: Prediction of power density at the distance of the applicable MPE limit S = PG/4R² = power density (in appropriate units, e.g. mW/cm2); P = power input to the antenna (in appropriate units, e.g., mW); G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is normally numeric gain; R = distance to the center of radiation of the antenna (appropriate units, e.g., cm); Calculated Data: Conducted output power Evaluation Power MPE Frequency Antenna Gain including Tune- Distance Density Limit (MHz) up Tolerance (cm) (mW/cm2) (mW/cm2) (dBi) (numeric) (dBm) (mW) 5745-5825 3.39 2.18 28 630.96 20.00 0.2741 1.0 The 2.4GHz and 5GHz can`t transmit simultaneously Result: The device meet FCC MPE at 20 cm distance Page 12 of 119


Document Created: 2019-09-06 19:00:18
Document Modified: 2019-09-06 19:00:18
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC