User Manual

FCC ID: SS3-RC1B1809

Users Manual

Download: PDF
FCCID_4047829

MAVIC 2 PRO Quick Start Guide V1.0

Aircraft The DJITM MAVICTM 2 Pro features omnidirectional Vision Systems and Infrared Sensing Systems*, and a fully stabilized 3-axis gimbal with a 1" CMOS sensor camera (jointly developed by DJI and Hasselblad) that shoots 4K video and 20-megapixel photos. DJI signature technologies such as Obstacle Sensing and Intelligent Flight Modes like HyperLapse, ActiveTrackTM 2.0, QuickShot, Panorama, and Advanced Pilot Assistance Systems, help you capture complex shots effortlessly. The Mavic 2 Pro boasts a maximum flight speed of 44.7 mph (72 kph) and a maximum flight time** of 31 minutes. 9 10 2 8 4 1 7 12 3 5 6 11 16 17 15 13 18 19 20 1. Gimbal and Camera 2. Forward Vision System 14 3. Downward Vision System 9. Motors 4. Lateral Vision System 10. Propellers 16. Battery Level LEDs 5. Downward Infrared 11. Antennas 17. Power Button Sensing System 12. Aircraft Status Indicator 18. Battery Buckles 6. Auxiliary Bottom Light 13. Upward Infrared Sensing System 19. USB-C Port 7. microSD Card Slot 14. Backward Vision System 20. Link Button/Linking 8. Front LEDs 15. Intelligent Flight Battery Status Indicator * The Vision Systems and Infrared Sensing Systems are affected by surrounding conditions. Read the Disclaimer and Safety Guidelines, User Manual, and watch the tutorial videos in the DJI GOTM 4 app or on the official DJI website to learn more. http://www.dji.com/mavic-2 ** Maximum flight time was tested in an environment with no wind while flying at a consistent 15.5 mph (25 kph). This value is for reference only.

Remote Controller Built into the remote controller is the DJI’s long-range transmission technology OCUSYNCTM 2.0, offering a maximum transmission range of 5 mi (8 km) and displaying video from the aircraft to the DJI GO 4 app on your mobile device at up to 1080p. An on-board LCD screen gives real- time aircraft data information and the detachable control sticks make the remote controller easier to store. Maximum run time: 2 hours and 15 minutes* Folded 1. LCD Screen 6 2. Flight Pause Button 3. 5D Button 7 4. Removable Control Sticks 5. Power Button 1 4 5 2 6. Antennas 3 7. RTH Button 8 8. Control Sticks Storage Slot 11 9 9. Reserve Video-Downlink Port (USB) 10 10. Mobile Device Clamp 11. Flight Mode Switch 17 18 12. Gimbal Dial 12 13 13. Aperture/Shutter Adjustment Dial 14. Record Button 16 14 15 15. Focus/Shutter Button 16. Video-Downlink/Power Port (micro USB) 17. C1 Button (Customizable) 18. C2 Button (Customizable) * The remote controller is able to reach its maximum transmission distance (FCC) in a wide-open area with no electromagnetic Interference at an altitude of about 400 ft (120 m). The maximum runtime is tested in a laboratory environment. This value is for reference only.

1. Download the DJI GO 4 App and Watching Tutorial Videos Search “DJI GO 4” in the App Store or Google Play or scan the QR code below to download the app on your mobile device. DJI GO 4 Watch the tutorial videos at www.dji.com/mavic-2 or in DJI GO 4 by tapping the icon in the top right corner of your screen. Tutorial videos DJI GO 4 is compatible with iOS 9.0 (or later) or Android 4.4 (or later). 2. Preparing the Aircraft 2 2 1 1 3 3 Remove the gimbal Unfold the front arms. Unfold the rear arms. cover from the camera. Marked Unmarked Match the propellers Press the propellers Unfolded to motors. down firmly and rotate in the lock direction. Unfold the front arms and the propellers before the rear ones. All arms and propellers must be unfolded before takeoff.

3. Charging the Batteries Use the provided charger to fully charge the Intelligent Flight Battery before first use. Remove the Intelligent Flight Battery Power Outlet 100 - 240V B B A A Charging Time: Charging Time: ~1 hour 30 minutes ~2 hour 15 minutes Remove the remote controller cable before charging. Checking the Battery Levels and Powering On/Off Low High Press once to check the battery level. Press once to check the battery level on Press, then press and hold to turn on/off. the LCD screen. Press once, then press and hold to turn on/ off the remote controller.

4. Preparing the Remote Controller Strong Unfold the antennas and mobile device clamps, then attach the control sticks. Weak Set the antennas parallel to each other 1 Place one end of the RC cable to the end of the slot. 2 3 Optimal Transmission Range Attach your mobile device within the clamps. Ensure the control sticks are firmly mounted. The remote controller cable with the Lightning connector is mounted by default. Use the appropriate cable for your mobile device to connect to the remote controller. When using an iPad or tablet, use the USB port on the remote controller. Do not use the Micro USB and the USB ports simultaneously for linking video.

5. Preparing for Takeoff DJI GO 4 App Power on the remote controller Power on the aircraft Launch DJI GO 4 Use your DJI account to activate the aircraft. Activation requires an internet connection. Internet 6. Flight Before taking off, make sure the Aircraft Status Bar in Ready to Go (GPS) DJI GO 4 displays “Ready to Go”. Auto Takeoff / Landing Auto Takeoff Auto Landing Manual Takeoff / Landing Combination stick command to start/stop OR the motors Left stick down (slowly) until you touch the Left stick up (slowly) ground to take off Hold a few seconds to stop the motors The motors can only be stopped mid-flight when the flight controller detects critical error.

Remote Controller Operation The default flight control is known as Mode 2. The left stick controls the aircraft's altitude and heading, while the right stick controls its forward, backward, left and right movements. The gimbal dial controls the camera's tilt. Left Stick Right Stick Forward Up Down Backward Turn Left Turn Right Left Right Press the Flight Pause button for emergency braking during flight. In DJI GO 4 Normal HyperLapse QuickShot ActiveTrack Point of Interest Waypoints TapFly Cinematic Mode Watch the tutorials in DJI GO 4 or at the official DJI website to learn more. Always set an appropriate RTH altitude before takeoff. When the aircraft is returning to the Home Point, you should guide it with the control sticks.

7. Fly Safe 120m Fly in Open Strong GPS Maintain Line of Fly Below 400 Feet Areas Signal Sight (120 m) Avoid flying over or near obstacles, crowds, high voltage power lines, trees or bodies of water. DO NOT fly near strong electromagnetic sources such as power lines and base stations as it may affect the onboard compass. ≥10 m/s DO NOT use the aircraft in adverse weather conditions such as rain, snow, fog and wind speeds exceeding 10 m/s or 22 mph. No Fly Zone Stay away from the rotating propellers Learn more at: and motors. http://flysafe.dji.com/no-fly It’s important to understand basic flight guidelines, for the safety of both you and those around you. Don't forget to read the Disclaimer and Safety Guidelines. MAVIC is a trademark of DJI. Copyright © 2018 DJI All Rights Reserved. Designed by DJI. Printed in China.

Specifications Aircraft Weight 907 g Max Speed 44.7 mph (72 kph) in Sport mode without wind Max Service Ceiling Above 19685 ft (6000 m) Sea Level Operating Temperature 14° to 104° F (-10° to 40° C) GNSS GPS + GLONASS Operating Frequency 2.4-2.4835 GHz; 5.725-5.850 GHz Gimbal Controllable Range Pitch: -90° to +30° Camera Sensor 1" CMOS; Effective pixels: 20M Lens FOV: approx. 77° 35 mm format equivalent: 28 mm Aperture: f/2.8-f/11 Focus: 1 m to ∞ ISO Range Video: 100-6400 Photo: 100-3200 (auto); 100-12800 (manual) Electronic Shutter Speed 8-1/8000 s Max Image Size 5472×3648 Still Photography Modes Single shot Burst shooting: 3/5 frames Auto Exposure Bracketing (AEB): 3/5 bracketed frames at 0.7 EV Bias Interval Video Recording Modes 4K Ultra HD: 3840×2160 24/25/30p 2.7K: 2688×1512 24/25/30/48/50/60p FHD: 1920×1080 24/25/30/48/50/60/120p Video Storage Bitrate 100 Mbps Photo JPEG, DNG (RAW) Video MP4, MOV (MPEG-4 AVC/H.264, HEVC) Supported SD Cards microSD Max Capacity: 128 GB (UHS-I Speed Grade 3 rating required) Remote Controller Operating Frequency 2.4-2.4835 GHz; 5.725-5.850 GHz Max Transmission Distance (Unobstructed and free of FCC: 5 mi (8 km); CE/MIC: 3.1 mi (5 km); SRRC: 3.1 mi (5 km) interference) Operating Temperature 32° to 104° F (0° to 40° C) Battery 3950mAh @ 3.83V

Operating Voltage 1800mA @ 3.83V (when charging the mobile device) Supported Mobile Device Thickness supported: 6.5 - 8.5 mm, Max length: 160 mm Size Supported USB port types: Lightning, Micro USB (Type-B) USB-C Charger Voltage 17.6±0.1 V Rated Power 60 W Intelligent Flight Battery Capacity 3850 mAh Voltage 17.6 V (max) 15.4 V (typical) Battery Type LiPo 4S Energy 59.29 Wh Net Weight Approx. 297 g Charging Temperature 41° to 104° F (5° to 40° C) Range Max Charging Power 80 W For more information, read the User Manual: http://www.dji.com/mavic-2 ※ This content is subject to change without prior notice.

FCC/ISEDC Compliance Notice This device complies with Part 15 of the FCC Rules and ISEDC licence‐exempt RSS standard. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received,including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Cet appareil est conforme à la section 15 du règlement de la FCC et à la norme RSS sans licence ISEDC. Son utilisation est soumise aux deux conditions suivantes: (1) Cet appareil ne doit pas causer d’interférences nuisibles et (2) Cet appareil doit accepter toutes les interférences reçues, y compris celles pouvant entraîner un fonctionnement indésirable. Tout changement ou modification non expressément approuvé par la partie responsable de la conformité peut annuler l'autorité de l'utilisateur à utiliser l'équipement. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐Reorient or relocate the receiving antenna. ‐Increase the separation between the equipment and receiver. ‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. RF Exposure Information Aircraft complies with FCC/ISEDC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC/ISEDC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm during normal operation. For Remote Controller (model RC1B),SAR tests are conducted using standard operating positions accepted by the FCC/ISEDC with the device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. Before a new model is a available for sale to the public, it must be tested and certified to the FCC/ISEDC that it does not exceed the exposure limit established by the FCC/ISEDC, Tests for each product are performed in positions and locations as required by the FCC/ISEDC. For Handheld operation,

this device has been tested and meets the FCC/ISEDC RF exposure guidelines when used with an accessory designated for this product or when used with an acces sory that contains no metal. For body worn operation, Remote Controller (model RC1B) has been tested and meets the FCC/ISEDC RF exposure guidelines when used with an accessory designated for this product. Non‐compliance with the above restrictions may result in violation of RF exposure guidelines. Informations sur l'exposition RF L’aéronef est conforme aux limites d’exposition aux rayonnements FCC / ISEDC établies pour un environnement non contrôlé. Afin d'éviter tout risque de dépassement des limites d'exposition aux radiofréquences FCC / ISEDC, la proximité humaine de l'antenne ne doit pas être inférieure à 20 cm en fonctionnement normal. Pour le contrôleur à distance (modèle RC1B), les tests SAR sont effectués à l'aide de positions de fonctionnement standard acceptées par la FCC / ISEDC, le dispositif émettant à son niveau de puissance certifié le plus élevé dans toutes les bandes de fréquences testées, bien que le SAR soit déterminé au niveau de puissance certifié le plus élevé. le niveau SAR réel de l'appareil en cours d'utilisation peut être bien inférieur à la valeur maximale. Avant qu'un nouveau modèle ne soit disponible à la vente au public, il doit être testé et certifié conforme par la FCC / ISEDC qu'il ne dépasse pas la limite d'exposition fixée par la FCC / ISEDC. Les tests de chaque produit sont effectués à requis par la FCC / ISEDC. Pour le fonctionnement en mode portatif, cet appareil a été testé et respecte les directives d'exposition RF de la FCC / ISEDC lorsqu'il est utilisé avec un accessoire conçu pour ce produit ou avec un accessoire ne contenant pas de métal. Pour le fonctionnement porté sur le corps, la télécommande (modèle RC1B) a été testée et répond aux directives d'exposition RF de la FCC / ISEDC lorsqu'elle est utilisée avec un accessoire conçu pour ce produit. Le non‐respect des restrictions ci‐dessus peut entraîner une violation des consignes d'exposition aux RF.

MAVIC 2 PRO For online support, please scan this c ode with Facebook Messenger 0M6DPARM01UK


Document Created: 2019-03-23 10:38:24
Document Modified: 2019-03-23 10:38:24
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC