User Manual Part 3

FCC ID: SS3-PV3311402

Users Manual

Download: PDF
FCCID_2214440

Three Field of View (FOV) options are supported when shooting in 1920x1080 60i, 1920x1080 30pand 1920x1080 25p: Wide (140°), Medium (120°) and Narrow (90°). [4]Photo Format JPEG RAW The PHANTOM 2 VISION+ camera shoots in JPEG and RAW file formats simultaneouslywhen this option is selected. See the following table for detailed specifications. JPEG photo size 4384X3288 4384X2922 4384X2466 RAW photo size 4384X3288 4384X2920 4384X2464 RAW format supports to be manipulated in Photoshop, including Photoshop CS, Photoshop Elements 3, Photoshop Elements 10 and Photoshop Lightroom. [5] Selectable ISO AUTO 100 200 400 [6] White Balance AWB (auto white balance) Sunny Cloudy Incandescentlamp [7]Exposure Metering Center Average Spot ©2014 DJI Innovations. All Rights Reserved.60 |

[8] Exposure Compensation -2.0（EV） 2.0（EV） -1.7（EV） 1.7（EV） -1.3（EV） 1.3（EV） -1.0（EV） 1.0（EV） -0.7（EV） 0.7（EV） -0.3（EV） 0.3（EV） 0（EV） [9] Sharpness Standard Hard Soft [10]Anti-flicker Auto 50Hz 60Hz [11]Restore Default Settings Restores all cameradefault settings. Camera reboot is needed to allowrestoration to take effect. [12]Format Micro-SD Card FormattheMicro-SD card. All data stored in the Micro-SD cardwill be lost after formatting. Remember to backup before formatting. ©2014 DJI Innovations. All Rights Reserved.61 |

4 Album Page DJI VISION App has SD CARD album and Mobile Device album. The captures and videos in SD CARD album store in Micro-SD card and those in Mobile Device album store in the storage devices of mobile device. The captures and videos in SD CARD album can be synchronized to Mobile Device album. In DJI VISION App, tap to enter into SD CARD album and tap to enter into Mobile Device album. SD C A R D A lbum M obile D evice A lbum SD CARD album is accessible when the mobile device is well connected to the Wi-Fi of PHANTOM 2 VISION+. SD CARDAlbum The pictures stored in the camera is presented to you in the thumbnail fashion. Tap the corresponding thumbnail to view the picture that you wish to see. [4] [1] [3] [2] ©2014 DJI Innovations. All Rights Reserved.62 |

[1]Photos and Videos are listed and grouped by date. [2]All photos and videos that have already been synced to your mobile device are identified with the icon. [3]Tap any thumbnail for single view mode. Tap a Photo thumbnail that hasn’t been synchronized to the mobile device to view the photo. Swipe left or right to view the previous or next photo item. Tap on a video thumbnail to play it and view the video’s length. A progress bar will also appear at the bottom of the screen.Tap to enter single synchronization mode to synchronize a singlephoto or video, orto synchronize and play a video at the same time. [4]Tapthe button to enter multiplesynchronization mode (as shown in the following diagram).Tap thumbnails to select photos or videos to synchronize to your mobile device (The thumbnails identified by the check markaresuccessfully selected.). Or you can select one or more groups to be synchronized by checking the box before the group, and then Tap to start synchronizing. During the synchronization process, users can tap to cancel the synchronization. Photos and videos that have been synchronized to the mobile devicewill remain. Some mobile devices does not support the synchronization of 1080i60 video files. [5] Select a group Select a single photo or video [5]Tap“Cancel”or “Finished” to exit themultiple synchronization mode and return to the SD CARD page. ©2014 DJI Innovations. All Rights Reserved.63 |

Mobile Device Album [2] [1] [3] [4] [1]You can browse all photos and videos in the album which have been synchronized to the mobile device, view a selected photo or play a selected video. [2]Photos and videos are listed in thumbnail style and sorted by capture time. [3]Pictures and videos are sorted by captured/recordedGeo-tagged locations. Internet access is required for downloading the map. Geo-tagged locations [4]Tap any thumbnail for single view;you can slide left or right to view the previous or next photo.Tap a video thumbnailto play a single video. [5] ©2014 DJI Innovations. All Rights Reserved.64 |

[5] [5]Tap to share your photos and videos to social network sites. Access to the Internet is requiredto share your photos and videos. ©2014 DJI Innovations. All Rights Reserved.65 |

5 News Page View the latest DJI news. (Internet access is required.) News List News Details ©2014 DJI Innovations. All Rights Reserved.66 |

6 Settings Page [8] [1] [9] [2] [10] [3] [11] [4] [12] [13] [5] [6] [14] [15] [7] [16] [1] Toolbar Auto Hide Slide the switch from left to right to enable this function. The toolbar will auto hide on the camera page. Toolbar Auto HideDisabled Toolbar Auto Hide Enabled [2] When Connection Lost [17] [18] [17]Stop Recording: Enabled:Stop recording when the Wi-Ficonnection between the mobile device and the camera breaks while the camera is recording. ©2014 DJI Innovations. All Rights Reserved.67 |

Disabled:Keep recording when the Wi-Ficonnection between the mobile device and the camera breaks while the camera is recording. [18] Selectthe state the camera will enter in the event of a Wi-Fi Connection break between the mobile device and the camera.Use this function to ensure you continue to capture the scenesyou don’t want to miss during a flight. [3] Camera Settings Display For iOS users, an enabled item will display in the camera settings toolbar, while a disabled item will be hidden. For Android users,there is no this item. [4]Preview Quality High: 640x480@30fps Medium: 640x480@15fps Medium: 320x240@30fps Low: 320x240@15fps (Recommended when there is a lot of interference.) [5] Parameter Unit Select imperial or metric units of measurement. ©2014 DJI Innovations. All Rights Reserved.68 |

[6]YAW Axial Control Perform the YAW axial rotate when this function is enabled. [7] Auto Flips The user interface of DJIVISION App will flip if the mobile device’s auto-flip is enabled. [8] Battery Low Warning If enabled, an alarm will sound when the battery level is too low. We recommended you to adjust the mobile devicevolume to the highestlevel. [9] Tutorial Usage tips will be displayed. [10] Clear News Cache Tap to flush thenews cache. [11] Binding In the eventthe camera and range extender bind is lost or one of them requires repair or replacement, camera and range extender binding should be performed via the DJI VISIONApp. Refer to the<How to PerformaCamera &Range Extender Binding> for details. [12]Rename SSID of Range Extender Tap to rename the SSID of range extender. ©2014 DJI Innovations. All Rights Reserved.69 |

[13] Find My PHANTOM 2 VISION+ M y location M y location PH A N TO M 2 PH A N TO M 2 V ISIO N ’ S location V ISIO N ’ S location Satellite M ode Standard M ode [14] Account Tap to see user’s account information. [15] Rate Tap to rate the DJI VISION App. Internet accessis required. Android App doesn’t have Rate item. [16] About Tap to see the current version of the DJI VISION App and also for contact information. ©2014 DJI Innovations. All Rights Reserved.70 |

Assistant Software For better use of PHANTOM 2 VISION+, PHANTOM 2 VISION+ Assistant Software and PHANTOM RC Assistant Software are involved. Both of them can run on Windows or Mac OS X system. 1Installing Driver and PHANTOM 2 VISION+Assistant Software Installing and running on Windows 1. Download driver installer and Assistant Software installer in EXE format from the download page of PHANTOM 2 VISION+on the DJI website. 2. Connect thePHANTOM 2 VISION+ to a PC via a Micro-USB cable. 3. Run the driver installer and follow the prompts to finish installation. 4. Next, run the Assistant Software installer and follow the prompts to finish installation. 5. Double click the PHANTOM 2 VISION+ icon on your Windows desktop to launch the software. The installer in EXE format only supports Windows operating systems (Win XP, Win7, Win8 (32 or 64 bit)). Installing and running on Mac OS X 1. Download theAssistant Software installer in DMG format from the download page of PHANTOM 2 VISION+ on the DJI website. 2. Run the installer and follow the prompts to finish installation. 3. When launching for the first timeif use Launchpad to run the PHANTOM 2 VISION+Assistant Software,Launchpad won’t allow access because the software has not been reviewed by Mac App Store. ©2014 DJI Innovations. All Rights Reserved.71 |

4. Locate the PHANTOM 2 VISION+ icon in the Finder,press the Control key and then click the icon (or right-click the icon using a mouse). Choose Open from the shortcut menu, click Open in the prompt dialog box and then software will launch. 5. After the first successful launch, direct launching of the software can be achieved by double-clicking the PHANTOM 2 VISION+icon in the Finder or using Launchpad. Installer in DMG format supports only Mac OS X 10.6or above. Usage of PHANTOM 2 VISION+Assistant Software on Mac OS X and Windows are exactly the same. The Assistant Software pages appear in other places of this manual are on the Windows for example. ©2014 DJI Innovations. All Rights Reserved.72 |

2Using the Assistant Software 2.1 Using the PHANTOM 2 VISION+ Assistant Software 1. Startup the PC, power on the PHANTOM 2 VISION+, thenconnect the PHANTOM 2 VISION+ to the PC with a Micro-USB cable. DO NOT disconnect until configuration is finished. 2. Run the PHANTOM 2 VISION+Assistant Software and wait for the PHANTOM 2 VISION+ to connect to the Assistant Software. Observe the indicators on the bottomof the screen. When connected successfully, the connection indicator is and communication indicator is blinking . 3. Choose [Basic] or [Advanced] configuration pages. 4. View and check the current configuration in the [View] page. Function sw itch betw een PH A N TO M 2 V ISIO N and N A ZA -M Language sw ap V iew configurations A ccount,softw are version R C ,G ain Firm w are upgrade G im bal,B attery IM U calibration C om m unication *This im age is for reference indicator only.Please refer to the actualuser interface. C onnection indicator (1) Users should not enable the Naza-M function before finishing the “Advanced Flight Maneuvers” procedure, in accordance with the "Phantom Pilot Training Guide”. If the Naza-M function is enabled, users can switch the control mode to either the ATTI. Mode, GPS Mode or Manual Mode, and accessthe advanced settings (e.g. IOC). In addition, the LED located on the rear frame arms will display the flight status according to the Naza-M's indicator, instead of the PHANTOM 2 VISION+'s indicator. Do not enable the Naza-M function unless you are an experienced user or guided by a professional. (2)You can change to the PHANTOM 2 VISION+ function by tapping the same button if the Naza-M function is enabled. This operation will disable the Naza-M function and enable the PHANTOM 2 VISION+ function.All parameters will bereturned to factory settings. Firmware upgrade of the PHANTOM 2 VISION+ 1. Click the [Upgrade] icon to check the current firmware version and whether the installed firmware is ©2014 DJI Innovations. All Rights Reserved.73 |

the latest version. If not, click the relative links to upgrade. 2. Be sure to wait until the Assistant Software shows “finished”. Click OK and power cycle the PHANTOM 2 VISION+ after 5 seconds. Once completed, the firmware is up to date. Firm w are upgradable item s U pgrade link C urrent firm w are version *This im age is for reference only.Please refer to the actualuser interface. （1） An internet connection is required to upgrade the PHANTOM 2 VISION+’s firmware. （2） DO NOT power off until the upgrade is finished. （3） If the firmware upgrade failed, the main controller will enter a waiting for firmware upgrade status automatically. If this happens, repeat the above procedures. Firmware upgradable items: (1)Main Controller (2)GPS (3)5.8GReceiver (4)P330CB (Main Board) (5)Battery (6)Gimbal IMU 2.2PHANTOM RC Assistant SoftwareUsage Please refer to the PHANTOM 2 VISION+Assistant Software to install PHANTOM RC Assistant Software, and then follow the procedures to finish the configuration of the remote controller. 1. Turn off the remote controller and find the Micro-USB port on the back of it. (If there is no one, users should open the rear cover to find the Micro-USB port on the board inner the remote controller.) 2. Start up the PC, power on the remote controller, and then Connect the remote controller to the PC with a Micro-USB cable. DO NOT disconnect until the configuration is finished. 3. Run the PHANTOM RC Assistant Software and wait for the remote controller to connect to the Assistant Software. Observe the indicators on the bottom left of the screen. When connected successfully, the connection indicator is and communication indicator is blinking . 4. Finish configuration in the [Main] page. 5. Finish upgrade in the [Info] page if necessary. ©2014 DJI Innovations. All Rights Reserved.74 |

Language sw ap M ain page Firm w are upgrade A ccount,softw are version *This im age is for C om m unication indicator reference only.Please refer to the actual C onnection indicator user interface. ©2014 DJI Innovations. All Rights Reserved.75 |

Appendix 1 LED Flight Indicator Status Normal status LEDFlight Indicators Power On Self-Test Warming Up Ready to Fly Ready to Fly (non-GPS) Warning and Error LEDFlight Indicators Remote Controller Signal Lost Low Battery Level Warning CriticalBattery Capacity Warning Not Stationary or Sensor Bias is too big Error* Compass Needs Calibration *You can figure out the error by connecting the PHANTOM 2 VISION+ to the PHANTOM 2 VISION+’s Assistant Software. ©2014 DJI Innovations. All Rights Reserved.76 |

2 Specifications Aircraft Supported Battery DJI 5200mAh Li-Po Battery PHANTOM 2 VISION+ Weight 1240g Hovering Accuracy (Ready to Fly) Vertical: 0.8m;Horizontal: 2.5m Max Yaw Angular Velocity 200°/s Max Pitch Angle 35° Max Ascent / Descent Speed 6m/s Max Flight Speed 15m/s (Not Recommended) Wheelbase 350mm Remote Controller Operating Frequency 5.728 GHz－5.85 GHz Communication Distance (open area) CE Compliance: 300m; FCC Compliance: 500m Receiver Sensitivity (1%PER) -93dBm Transmitting Power(EIRP) CE Compliance: 25mW; FCC Compliance: 125mW Working Current/Voltage 80 mA@6V Battery 4 AA Batteries Gimbal Static : 750mA Working Current Dynamic : 900mA Control Accuracy ±0.03° Controllable Range Pitch : -90°~+15° Maximum Angular Speed Pitch : 90°/s Camera Operating EnvironmentTemperature 0℃-40℃ Resolution 14 Megapixels FOV 140°/ 120° / 90° Sensor Size 1/2.3” Range Extender Operating Frequency 2412MHz -2462MHz Communication Distance (open area) 500m Transmitting Power 18dBm Power Consumption 2W ©2014 DJI Innovations. All Rights Reserved.77 |

3 Troubleshooting（FAQ） 3.1How to solve large margin(s) mid-point error? If the Remote Controller stick(s) mid-point margin of error is too big, the motors will fail to start when you execute the Combination Stick Commands (CSC) and the aircraft willnot takeoff. Below are possible situations where the Remote Controller’s stick(s) mid-point margins of error could be too big: (1)One of the Remote Controller’s stick position (except the throttle stick) is not centered when powering on the PHANTOM 2 VISION+. Solution:Place all Remote Controller sticks at their mid-point positions and then power cycle the PHANTOM 2 VISION+ to re-record the mid-point. If the problem persists, this can be caused by scenario (2). (2)The Remote Controller sticks have been trimmed which leads to a large deviation of the mid-point position. Solution:Use the Assistant Software to perform aRemote Controller calibration. To do so, carry out the following procedures. (a) Connect to the Assistant Software, tap Basic-> RC-> Command Sticks Calibration, and push all Remote Controller sticks through their complete travel range to see if any stick cannot reach its outer most position. (b) Power cycle the PHANTOM 2 VISION+. Note that a power cycle is required. (c) Redo the Remote Controller calibration according to the Assistant Software. If the above solutions do not solve your issue, please send your Remote Controller to DJI Customer service for repair. 3.2 How to restore a video file if power is turned off during a recording session? Solution: Keep or place the Micro-SD card back intothe camera. Power cycle the camera and wait about 30 seconds for the video file to be restored. 3.3 Failure to acquire the SSID. Solution:Double check whether both the camera and Range Extender are powered on and the power switch of the camera is switched to“WIFI ON.” 3.4 What to do ifPHANTOM 2 VISION+ is out of sight andthe Wi-Fi connections is lost? Solution:Turn off the Remote Controller to trigger the Failsafe mode and the aircraft will start to fly back, descend, and land at the Home point automatically. Please make sure there are no obstacles within the go home route and you are familiar with the regaining control procedure. 3.5 Wi-Fi connection fails all the time. Solution:Double check the current Wi-Fi connection status of the mobile device.The mobile device may be ©2014 DJI Innovations. All Rights Reserved.78 |

connecting to other Wi-Fi networks after a connection breaks with thePHANTOM 2 VISION+. 3.6 Files fail to synchronize. Solution:Videofiles that are too large (file sizes close to 4GB) cannot be synchronized to the mobile device. Some mobile devices also fail to support synchronization of the 1080i60 video files. 3.7 iOSAlbumsfail to synchronize. Solution:Reset the settings of your mobile device as illustrated below. Enable the Settings ->Private->Photos->DJI VISION. Otherwise the Albums will fail to synchronize with your mobile device. 3.8 Failure to share. Solution:Please make sure the mobile device has access to the Internet. 3.9Some mobile Android devices have a problem connecting to the PHANTOM 2 VISION+ Wi-Fi Extender. Solution:Some mobile Android devices do not allow for both a Wi-Fi connection and a mobile data connection at the same time. When trying to connect to the PHANTOM 2 VISION+ Wi-Fi network, most devices will check whether an Internet connection has a certain Wi-Fi setting enabled, e.g. Auto network switch or Test for Internet connection. If no Internet connection is found because the PHANTOM 2 VISION+ creates a non-routable connection it will drop the PHANTOM 2 VISION+ Wi-Fi network connection and scan for the next available connection. Example: For the Samsung Note 3, carry out the following procedures to solve this issue. Tap Settings -> Wi-Fi, and then tap the “Menu” button. Select “Advanced” then uncheck the “Auto network switch”. You might see a warning that indicates the Internet connection is unstable but just ignore this message. ©2014 DJI Innovations. All Rights Reserved.79 |

3.10 Usage tips for the App used on multiple mobile devices. During flight, if you use the App on multiple mobile devices, please turn off the App on the first mobile device, and then turn on the App on the second one to ensure the App can work normally on the second mobile device. 3.11 How to land the aircraft smoothly in a better way? First pull the throttle stick position down to lower than 5%, then execute the CSC command to stop the motors. 3.12 Why the discharge times of a new battery not at zero? A battery aging test is performed prior to delivery which affects the discharge time of the new battery. This is why the discharge time of a new battery is not zero. The battery is okay to use. ©2014 DJI Innovations. All Rights Reserved.80 |


Document Created: 2014-03-03 17:55:27
Document Modified: 2014-03-03 17:55:27
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC