Test Report

FCC ID: SS3-PS512M21610

Test Report

Download: PDF
FCCID_3205400

FCC PART 15 B TEST REPORT For SZ DJI TECHNOLOGY CO., LTD 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan, Shenzhen, Guangdong, China FCC ID: SS3-PS512M21610 Repo rt Typ e: Pro duct Na me: Orig inal Repor t DJI CINESSD STATION Test Engineer: Kevin Hu Report Number: RDG161009004 Report Date: 2016-11-11 Henry Ding EMC Leader Reviewed By: Bay Area Compliance Laboratories Corp. (Chengdu) Test Laboratory: 5040, HuiLongWan Plaza, No. 1, ShaWan Road, JinNiu District, ChengDu, China Tel: 028-65523123, Fax: 028-65525125 www.baclcorp.com Note: This test report was prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Chengdu). Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. This report was valid only with a valid digital signature.

Bay Area Compliance Laboratories Corp. (Chengdu) TABLE OF CONTENTS GENERAL INFORMATION ........................................................................................................................................3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ................................................................................3 OBJECTIVE ..................................................................................................................................................................3 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................................3 TEST METHODOLOGY .................................................................................................................................................4 TEST FACILITY .............................................................................................................................................................4 SYSTEM TEST CONFIGURATION ...........................................................................................................................5 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................5 EUT EXERCISE SOFTWARE ........................................................................................................................................5 EQUIPMENT MODIFICATIONS ......................................................................................................................................5 LOCAL SUPPORT EQUIPMENT LIST AND DETAILS ......................................................................................................5 SUPPORT CABLE LIST AND DETAILS...........................................................................................................................5 CONFIGURATION OF TEST SETUP...............................................................................................................................6 SUMMARY OF TEST RESULTS ...............................................................................................................................7 FCC§15.107 - CONDUCTED EMISSIONS ..............................................................................................................8 MEASUREMENT UNCERTAINTY ...................................................................................................................................8 EUT SETUP .................................................................................................................................................................8 EMI TEST RECEIVER SETUP ......................................................................................................................................9 TEST EQUIPMENT LIST AND DETAILS .........................................................................................................................9 TEST PROCEDURE ......................................................................................................................................................9 CORRECTED AMPLITUDE & MARGIN CALCULATION ...................................................................................................9 TEST DATA ................................................................................................................................................................10 FCC §15.109 - RADIATED SPURIOUS EMISSIONS ..........................................................................................13 MEASUREMENT UNCERTAINTY .................................................................................................................................13 EUT SETUP ...............................................................................................................................................................13 EMI TEST RECEIVER SETUP ....................................................................................................................................14 TEST PROCEDURE ....................................................................................................................................................14 TEST EQUIPMENT LIST AND DETAILS .......................................................................................................................15 CORRECTED AMPLITUDE & MARGIN CALCULATION .................................................................................................15 TEST DATA ................................................................................................................................................................15 Report No.: RDG161009004 Page 2 of 17

Bay Area Compliance Laboratories Corp. (Chengdu) GENERAL INFORMATION Product Description for Equipment Under Test (EUT) The SZ DJI TECHNOLOGY CO., LTD ’s product, model number: PS512M2 (FCC ID: SS3-PS512M21610) (the "EUT") in this report was a DJI CINESSD, which was measured approximately: 10.4 cm (L) × 2.6 cm (W) × 0.6 cm (H), rated input voltage: DC 3.3V from DJI CINESSD STATION. The highest operating frequency is 600MHz. *All measurement and test data in this report was gathered from final production sample, serial number: 161009004 (assigned by the BACL, Chengdu). It may have deviation from any other sample. The EUT supplied by the applicant was received on 2016-10-08, and EUT conformed to test requirement. Objective This test report is prepared on behalf of SZ DJI TECHNOLOGY CO., LTD in accordance with Part 2, Subpart J, and Part 15-Subparts A and B of the Federal Communications Commission’s rules. The objective of the manufacturer is to determine the compliance of EUT with FCC Part 15 B Class B. Related Submittal(s)/Grant(s) Submitted with the Part of a system with FCC ID: SS3-PR05GU31610. Report No.: RDG161009004 Page 3 of 17

Bay Area Compliance Laboratories Corp. (Chengdu) Test Methodology All measurements contained in this report were conducted with ANSI C63.4-2014, American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the range of 9 kHz to 40 GHz. The uncertainty of any RF tests which use conducted method measurement is ±3.17 dB, the uncertainty of any radiation on emissions measurement is: 30M~200MHz: ±4.7 dB; 200M~1GHz: ±6.0 dB; 1G-6GHz: ±5.13dB; 6G~25GHz: ±5.47dB; And the uncertainty will not be taken into consideration for all test data recorded in the report. Test Facility The test site used by BACL to collect test data is located in the 5040, HuiLongWan Plaza, No. 1, ShaWan Road, JinNiu District, ChengDu, China Test site at BACL has been fully described in reports submitted to the Federal Communication Commission (FCC). The details of these reports have been found to be in compliance with the requirements of Section 2.948 of the FCC Rules on April 24, 2015. The facility also complies with the radiated and AC line conducted test site criteria set forth in ANSI C63.4-2014. The Federal Communications Commission has the reports on file and is listed under FCC Registration No.: 560332. The test site has been approved by the FCC for public use and is listed in the FCC Public Access Link (PAL) database. Report No.: RDG161009004 Page 4 of 17

Bay Area Compliance Laboratories Corp. (Chengdu) SYSTEM TEST CONFIGURATION Description of Test Configuration The system was configured for testing in a typical fashion (as normally used by a typical user). EUT Exercise Software The software “Burn In” was used during test. Equipment Modifications No modification was made to the EUT tested. Local Support Equipment List and Details Manufacturer Description Model Serial Number IBM PC 8176 99Y7315 DELL Display E157FPC 060229-11 ANTER Modem EGW802 0508350054-1B Lenovo Keyboard KB-US19EB IMHYX011071016460 Lenovo Mouse MO-5013U IMJS011041409259 DJI DJI CINESSD STATION PR05GU3 N/A Support Cable List and Details Shielding Length Cable Description Ferrite Core From Port To Type (m) Serial Cable yes No 1.6 Serial Port of PC Modem Mouse Cable yes No 1.4 Parallel Port of PC Mouse Keyboard Cable yes No 1.3 USB Port of PC Keyboard D-SUB Cable yes yes 1.8 D-SUB Port of PC Display DJI CINESSD USB Cable yes No 0.5 USB Port of PC STATION Report No.: RDG161009004 Page 5 of 17

Bay Area Compliance Laboratories Corp. (Chengdu) Configuration of Test Setup Report No.: RDG161009004 Page 6 of 17

Bay Area Compliance Laboratories Corp. (Chengdu) SUMMARY OF TEST RESULTS FCC Rules Description of Test Results §15.107 Conducted Emissions Compliance §15.109 Radiated Emissions Compliance Report No.: RDG161009004 Page 7 of 17

Bay Area Compliance Laboratories Corp. (Chengdu) FCC§15.107 - CONDUCTED EMISSIONS Measurement Uncertainty All measurements involve certain levels of uncertainties, especially in field of EMC. The factors contributing to uncertainties are Receiver, cable loss, and LISN. Compliance or non- compliance with a disturbance limit shall be determined in the following manner： If Ulab is less than or equal to Ucispr of Table 1, then: –compliance is deemed to occur if no measured disturbance level exceeds the disturbance limit; –non - compliance is deemed to occur if any measured disturbance level exceeds the disturbance limit. If Ulab is greater than Ucispr of Table 1, then: –compliance is deemed to occur if no measured disturbance level, increased by (Ulab − Ucispr), exceeds the disturbance limit; –non - compliance is deemed to occur if any measured disturbance level, increased by (Ulab − Ucispr), exceeds the disturbance limit. Based on CISPR 16-4-2:2011, measurement uncertainty of conducted disturbance at mains port using AMN at Bay Area Compliance Laboratories Corp. (Chengdu) is ±3.17 dB (150 kHz to 30 MHz). Table 1 – Values of Ucispr Measurement Ucispr Conducted disturbance at mains port using AMN (150 kHz to 30 MHz) 3.4 dB EUT Setup Report No.: RDG161009004 Page 8 of 17

Bay Area Compliance Laboratories Corp. (Chengdu) The setup of EUT is according with per ANSI C63.4-2014 measurement procedure. The specification used was with the FCC Part 15 B Class B limits. The external I/O cables were draped along the test table and formed a bundle 30 to 40 cm long in the middle. The DJI CINESSD STATION from PC was connected to a 120V/60Hz AC power source. EMI Test Receiver Setup The EMI test receiver was set to investigate the spectrum from 150 kHz to 30 MHz. During the conducted emission test, the EMI test receiver was set with the following configurations: Frequency Range IF B/W 150 kHz – 30 MHz 9 kHz Test Equipment List and Details Serial Calibration Calibration Manufacturer Description Model Number Date Due Date EMI Test Rohde & Schwarz ESCS 30 836858/0016 2015-12-02 2016-12-01 Receiver Rohde & Schwarz L.I.S.N. ENV216 3560.6550.06 2015-12-02 2016-12-01 Rohde & Schwarz PULSE LIMITER ESH3Z2 357.8810.52 2015-10-31 2016-10-30 N/A Conducted Cable NO.5 N/A 2015-11-10 2016-11-09 * Statement of Traceability: BACL (Chengdu) attested that all calibrations have been performed, traceable to National Primary Standards and International System of Units (SI). Test Procedure During the conducted emission test, the adapter of laptop was connected to the outlet of the first LISN and the other support equipments were connected to the outlet of the second LISN. Maximizing procedure was performed on the six (6) highest emissions of the EUT. All data was recorded in the Quasi-peak and average detection mode. Corrected Amplitude & Margin Calculation The basic equation is as follows: VC = VR + AC + VDF Report No.: RDG161009004 Page 9 of 17

Bay Area Compliance Laboratories Corp. (Chengdu) Herein, VC: corrected voltage amplitude VR: reading voltage amplitude Ac: attenuation caused by cable loss VDF: voltage division factor of AMN or ISN The “Margin” column of the following data tables indicates the degree of compliance within the applicable limit. For example, a margin of 7dB means the emission is 7dB below the maximum limit. The equation for margin calculation is as follows: Margin = Limit – Corrected Amplitude Test Data Environmental Conditions Temperature: 30.1 °C Relative Humidity: 48 % ATM Pressure: 101.2 kPa The testing was performed by Kevin Hu on 2016-10-28. Report No.: RDG161009004 Page 10 of 17

Bay Area Compliance Laboratories Corp. (Chengdu) Test Mode: Read AC120V, 60Hz, Line: 100 80 Level in dB 礦 Quasi-Peak Limit 60 Average Limit 40 20 0 150k 300 400500 800 1M 2M 3M 4M 5M 6 8 10M 20M 30M Frequency in Hz Frequency QuasiPeak Bandwidth Corr. Margin Limit Line Comment (MHz) (dBμV) (kHz) (dB) (dB) (dBμV) 0.158948 58.2 9.000 L1 18.8 7.3 65.5 Compliance 1.153547 44.7 9.000 L1 20.0 11.3 56.0 Compliance 1.300465 46.9 9.000 L1 20.0 9.1 56.0 Compliance 1.348086 48.4 9.000 L1 20.0 7.6 56.0 Compliance 1.372546 44.3 9.000 L1 20.0 11.7 56.0 Compliance 1.419967 43.0 9.000 L1 20.0 13.0 56.0 Compliance Frequency Average Bandwidth Corr. Margin Limit Line Comment (MHz) (dBμV) (kHz) (dB) (dB) (dBμV) 0.157368 49.5 9.000 L1 18.8 6.1 55.6 Compliance 0.632195 40.3 9.000 L1 20.0 5.7 46.0 Compliance 0.711290 39.1 9.000 L1 19.9 6.9 46.0 Compliance 1.106148 39.5 9.000 L1 19.9 6.5 46.0 Compliance 1.264592 39.9 9.000 L1 20.0 6.1 46.0 Compliance 1.737473 35.5 9.000 L1 20.0 10.5 46.0 Compliance Report No.: RDG161009004 Page 11 of 17

Bay Area Compliance Laboratories Corp. (Chengdu) AC120V, 60Hz, Neutral: 100 80 Level in dB 礦 Quasi-Peak Limit 60 Average Limit 40 20 0 150k 300 400500 800 1M 2M 3M 4M 5M 6 8 10M 20M 30M Frequency in Hz Frequency QuasiPeak Bandwidth Corr. Margin Limit Line Comment (MHz) (dBμV) (kHz) (dB) (dB) (dBμV) 0.158314 60.9 9.000 N 18.8 4.7 65.6 Compliance 0.236555 52.9 9.000 N 19.1 9.3 62.2 Compliance 0.316047 46.5 9.000 N 19.6 13.3 59.8 Compliance 1.153547 43.2 9.000 N 20.0 12.8 56.0 Compliance 1.345395 47.0 9.000 N 20.0 9.0 56.0 Compliance 1.417133 45.4 9.000 N 20.0 10.6 56.0 Compliance Frequency Average Bandwidth Corr. Margin Limit Line Comment (MHz) (dBμV) (kHz) (dB) (dB) (dBμV) 0.156741 50.6 9.000 N 18.8 5.0 55.6 Compliance 0.236555 44.6 9.000 N 19.1 7.6 52.2 Compliance 0.551882 38.8 9.000 N 19.9 7.2 46.0 Compliance 0.630933 39.1 9.000 N 19.9 6.9 46.0 Compliance 0.708453 39.7 9.000 N 19.9 6.3 46.0 Compliance 1.179180 38.2 9.000 N 20.0 7.8 46.0 Compliance Report No.: RDG161009004 Page 12 of 17

Bay Area Compliance Laboratories Corp. (Chengdu) FCC §15.109 - RADIATED SPURIOUS EMISSIONS Measurement Uncertainty Compliance or non- compliance with a disturbance limit shall be determined in the following manner： If Ulab is less than or equal to Ucispr of Table 1, then: –compliance is deemed to occur if no measured disturbance level exceeds the disturbance limit; –non - compliance is deemed to occur if any measured disturbance level exceeds the disturbance limit. If Ulab is greater than Ucispr of Table 1, then: –compliance is deemed to occur if no measured disturbance level, increased by (Ulab − Ucispr), exceeds the disturbance limit; –non - compliance is deemed to occur if any measured disturbance level, increased by (Ulab − Ucispr), exceeds the disturbance limit. Based on CISPR 16-4-2-2011, measurement uncertainty of radiated emission at a distance of 3m at Bay Area Compliance Laboratories Corp. (Chengdu) is: 30M~200MHz: ±4.7 dB ; 200M~1GHz: ±6.0 dB ; 1G-6GHz: ±5.13dB; 6G~25GHz: ±5.47 dB; Table 1 – Values of Ucispr Measurement Ucispr Radiated disturbance (electric field strength at an OATS or in a SAC) (30 MHz to 1000 MHz) 6.3 dB Radiated disturbance (electric field strength in a FAR) (1 GHz to 6 GHz) 5.2 dB Radiated disturbance (electric field strength in a FAR) (6 GHz to 18 GHz) 5.5 dB EUT Setup Below 1GHz: Report No.: RDG161009004 Page 13 of 17

Bay Area Compliance Laboratories Corp. (Chengdu) Above 1GHz: The radiated emission tests were performed at the 3 meters distance in chamber, using the setup accordance with the ANSI C63.4-2014. The specification used was the FCC Part 15.109 Class B limits. EMI Test Receiver Setup The system was investigated from 30 MHz to 5 GHz. During the radiated emission test, the EMI test receiver was set with the following configurations: Frequency Range RBW Video B/W IF B/W Detector 30 MHz – 1000 MHz 120 kHz 300 kHz 120 kHz QP 1 MHz 3 MHz / Peak Above 1 GHz 1 MHz 10 Hz / AVG Test Procedure During the radiated emissions, the adapter of laptop was connected to the first AC floor outlet and the other support equipments were connected to the second AC floor outlet. Maximizing procedure was performed on the highest emissions to ensure that the EUT complied with all installation combinations. The data was recorded in the Quasi-peak detection mode for below 1 GHz, peak and average detection mode above 1 GHz. Report No.: RDG161009004 Page 14 of 17

Bay Area Compliance Laboratories Corp. (Chengdu) Test Equipment List and Details Serial Calibration Calibration Manufacturer Description Model Number Date Due Date Agilent Amplifier 8447D 2944A10442 2015-12-02 2016-12-01 Rohde & EMI Test Receiver ESCI 100028 2015-12-02 2016-12-01 Schwarz Sunol Sciences Broadband Antenna JB3 A101808 2016-04-10 2019-04-09 Rohde & Spectrum Analyzer FSEM30 100018 2015-12-02 2016-12-01 Schwarz EM TEST Horn Antenna 3115 003-6076 2015-12-02 2016-12-01 Ducommun 1007726-0113 Horn Antenna ARH-4223-02 2014-06-16 2017-06-15 Technologies 024 Mini-circuits Amplifier ZVA-213-S+ 771001215 2016-05-20 2017-05-19 Semi-Anechoic EMCT 966 N/A 2015-04-24 2018-04-23 Chamber RF Cable N/A NO.1 N/A 2015-11-10 2016-11-09 (below 1GHz) RF Cable N/A NO.4 N/A 2015-11-10 2016-11-09 (below 1GHz) RF Cable N/A NO.2 N/A 2015-11-10 2016-11-09 (above 1GHz) * Statement of Traceability: BACL (Chengdu) attested that all calibrations have been performed, traceable to National Primary Standards and International System of Units (SI). Corrected Amplitude & Margin Calculation The Corrected Amplitude is calculated by adding the Antenna Loss and Cable Loss, and subtracting the Amplifier Gain from the Meter Reading. The basic equation is as follows: Corrected Amplitude = Meter Reading + Antenna Loss + Cable Loss - Amplifier Gain The “Margin” column of the following data tables indicates the degree of compliance with the applicable limit. For example, a margin of 7 dB means the emission is 7 dB below the limit. The equation for margin calculation is as follows: Margin = Limit – Corrected Amplitude Test Data Environmental Conditions Temperature: 32 °C Relative Humidity: 52 % ATM Pressure: 101.5 kPa * The testing was performed by Kevin Hu on 2016-11-09. Test Result: Compliance Report No.: RDG161009004 Page 15 of 17

Bay Area Compliance Laboratories Corp. (Chengdu) Test Mode: Read 1) Below 1GHz: 80 70 60 Level in dBμV/ 50 40 30 20 10 0 30M 50 60 80 100M 200 300 400 500 800 1G Frequency in Hz Frequency QuasiPeak Height Azimuth Corr. Margin Limit Polarization (MHz) (dBμV/m) (cm) (deg) (dB) (dB) (dBμV/m) 36.426250 28.5 100.0 V 302.0 -10.0 11.5 40.0 421.395000 32.7 100.0 H 289.0 -10.1 13.3 46.0 433.398750 36.2 100.0 H 161.0 -10.0 9.8 46.0 438.733750 33.2 100.0 H 127.0 -10.0 12.8 46.0 599.996250 33.1 100.0 V 250.0 -7.5 12.9 46.0 720.033750 33.4 200.0 H 228.0 -5.5 12.6 46.0 Report No.: RDG161009004 Page 16 of 17

Bay Area Compliance Laboratories Corp. (Chengdu) 2) 1GHz-5GHz: Frequency Receiver Rx Antenna Cable Amplifier Corrected Limit Margin Reading Polar Factor loss Gain Amplitude (MHz) Detector (dB) (dB) (dBμV/m) (dBμV) (H/V) (dB) (dBμV/m) (dB) 1200.4 45.63 PK H 23.32 2.26 26.62 44.59 74.00 29.41 1200.4 33.12 AV H 23.32 2.26 26.62 32.08 54.00 21.92 1270.54 44.56 PK H 23.50 2.35 26.55 43.86 74.00 30.14 1270.54 32.1 AV H 23.50 2.35 26.55 31.40 54.00 22.60 2062.12 42.41 PK H 24.69 3.04 26.83 43.31 74.00 30.69 2062.12 29.87 AV H 24.69 3.04 26.83 30.77 54.00 23.23 1591.18 46.49 PK V 24.25 2.74 26.42 47.06 74.00 26.94 1591.18 33.68 AV V 24.25 2.74 26.42 34.25 54.00 19.75 1801.6 50.33 PK V 24.58 2.90 26.63 51.18 74.00 22.82 1801.6 37.64 AV V 24.58 2.90 26.63 38.49 54.00 15.51 2082.16 48.78 PK V 24.62 3.04 26.83 49.61 74.00 24.39 2082.16 36.24 AV V 24.62 3.04 26.83 37.07 54.00 16.93 ***** END OF REPORT ***** Report No.: RDG161009004 Page 17 of 17


Document Created: 2016-11-17 19:31:46
Document Modified: 2016-11-17 19:31:46
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC