RF Exposure

FCC ID: SS3-PM8201512

RF Exposure Info

Download: PDF

FCCID_2958369

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG151219002-00A

FCC §15.247 (i) & §1.1307 & §2.1091- MAXIMUM PERMISSIBLE
EXPOSURE (MPE)
Applicable Standard
According to subpart 15.247(i) and subpart §1.1307, systems operating under the provisions of this section
shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in
excess of the Commission’s guidelines.

Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091)

(B) Limits for General Population/Uncontrolled Exposure

Frequency Range Electric Field Magnetic Field Power Density Averaging Time
(MHz) Strength (V/m) Strength (A/m) (mW/cm2) (minutes)

0.3–1.34 614 1.63 *(100) 30
1.34–30 824/f 2.19/f *(180/f²) 30
30–300 27.5 0.073 0.2 30
300–1500 / / f/1500 30
1500–100,000 / / 1.0 30

f = frequency in MHz; * = Plane-wave equivalent power density;

According to §1.1310 and §2.1091 RF exposure is calculated.

Calculated Formulary:

Predication of MPE limit at a given distance
S = PG/4πR² = power density (in appropriate units, e.g. mW/cm2);
P = power input to the antenna (in appropriate units, e.g., mW);
G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain
factor, is normally numeric gain;
R = distance to the center of radiation of the antenna (appropriate units, e.g., cm);

Calculated Data:

Maximum Evaluation Power MPE
Frequency Antenna Gain
Power Distance Density Limit
(MHz)
(dBi) (numeric) (dBm) (mW) (cm) (mW/cm2) (mW/cm2)
2406.5-
2 1.58 30 1000 20.00 0.314 1.0
2476.5

Note: The tune-up power is 28+/-2dBm.

Result: The device meet FCC MPE at 20 cm distance

FCC Part 15.247 Page 6 of 30

Document Created: 2017-11-23 12:12:42
Document Modified: 2017-11-23 12:12:42

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC