RF Exposure

FCC ID: SS3-MM1A1702

RF Exposure Info

Download: PDF
FCCID_3402173

 Bay Area Compliance Laboratories Corp. (Chengdu)

FCC §15.247 (i) & §1.1310 & §2.1091- MAXIMUM PERMISSIBLE
EXPOSURE (MPE)
Applicable Standard
According to subpart 15.247(i)and subpart §1.1310, systems operating under the provisions of
this section shall be operated in a manner that ensures that the public is not exposed to radio
frequency energy level in excess of the Commission’s guidelines.
Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091)

                     (B) Limits for General Population/Uncontrolled Exposure
Frequency Range     Electric Field       Magnetic Field      Power Density          Averaging Time
                                                                         2
      (MHz)         Strength (V/m)       Strength (A/m)        (mW/cm )               (minutes)
    0.3–1.34              614                  1.63               *(100)                  30
    1.34–30              824/f                2.19/f             *(180/f²)                30
     30–300               27.5                0.073                 0.2                   30
   300–1500                 /                    /                f/1500                  30
 1500–100,000               /                    /                  1.0                   30

f = frequency in MHz; * = Plane-wave equivalent power density;

According to §1.1310 and §2.1091 RF exposure is calculated.


Calculated Formula:
Prediction of power density at the distance of the applicable MPE limit
S = PG/4πR² = power density (in appropriate units, e.g. mW/cm2);
P = power input to the antenna (in appropriate units, e.g., mW);
G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the
power gain factor, is normally numeric gain;
R = distance to the center of radiation of the antenna (appropriate units, e.g., cm);

For simultaneously transmit system, the calculated power density should comply with:




Report No.: RDG170226002C                                                              Page 11 of 66


Bay Area Compliance Laboratories Corp. (Chengdu)

Calculated Data:

                                          Tune-up      Evaluation     Power       MPE
      Frequency     Antenna Gain
                                           Power        Distance     Density      Limit
        (MHz)                                                               2           2
                   (dBi)   (numeric)   (dBm) (mW)         (cm)      (mW/cm )    (mW/cm )
        2400-
                   1.09      1.29       25    316.23     20.00       0.0809        1.0
        2483.5
      5725-5850    3.57      2.28       23    199.53     20.00       0.0904        1.0

The 2.4GHz and 5GHz band can`t transmit simultaneously:

Result: The device meet FCC MPE at 20 cm distance




Report No.: RDG170226002C                                                          Page 12 of 66



Document Created: 2017-05-08 17:41:24
Document Modified: 2017-05-08 17:41:24

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC