RF Exposure

FCC ID: SS3-M200V21811

RF Exposure Info

Download: PDF
FCCID_4117062

Bay Area Compliance Laboratories Corp. (Dongguan)                               Report No.: RDG181113002-00B

FCC §15.247 (i) & §1.1310 & §2.1091- MAXIMUM PERMISSIBLE
EXPOSURE (MPE)
Applicable Standard
According to subpart 15.247(i)and subpart §1.1310, systems operating under the provisions of this section
shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in
excess of the Commission’s guidelines.

Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091)

                          (B) Limits for General Population/Uncontrolled Exposure
Frequency Range         Electric Field       Magnetic Field        Power Density               Averaging Time
      (MHz)            Strength (V/m)        Strength (A/m)           (mW/cm2)                   (minutes)
     0.3–1.34                614                   1.63                 *(100)                       30
     1.34–30                824/f                 2.19/f               *(180/f²)                     30
     30–300                  27.5                 0.073                   0.2                        30
    300–1500                  /                      /                  f/1500                       30
  1500–100,000                /                      /                    1.0                        30

f = frequency in MHz; * = Plane-wave equivalent power density;

According to §1.1310 and §2.1091 RF exposure is calculated.


Calculation formula:

Prediction of power density at the distance of the applicable MPE limit
S = PG/4R² = power density (in appropriate units, e.g. mW/cm2);
P = power input to the antenna (in appropriate units, e.g., mW);
G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain
factor, is normally numeric gain;
R = distance to the center of radiation of the antenna (appropriate units, e.g., cm);


Calculated Data:

                                              Max. Target Power
                                                                     Evaluation       Power        MPE
       Frequency         Antenna Gain              including
                                                                      Distance       Density       Limit
         Band                                     Tolerance
                                                                        (cm)         (W/m2)       (W/m2)
                       (dBi)    (numeric)     (dBm)       (mW)
      2.4GHz Band       2.29       1.69        26.5       446.68        20.00          0.15         1.0
      5.8GHz Band       2.51       1.78         21        125.89        20.00         0.045         1.0

Note: the Max. Target Power including Tolerance was declared by manufacturer.
      The 2.4GHz band and 5.8GHz band can`t transmit simultaneously

Result: Compliance, The device meets MPE requirement for Devices Used by the General Public
(Uncontrolled Environment) at distance ≥20 cm.




                                                                                                   Page 11 of 66



Document Created: 2019-11-12 00:15:31
Document Modified: 2019-11-12 00:15:31

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC