RF Exposure

FCC ID: SS3-M1P1607

RF Exposure Info

Download: PDF
FCCID_3146139

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.:RDG160806002-00B FCC §15.407 (f) & §1.1310 & §2.1091- MAXIMUM PERMISSIBLE EXPOSURE (MPE) Applicable Standard According to subpart 15.407(f)and subpart §1.1310, systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091) (B) Limits for General Population/Uncontrolled Exposure Frequency Range Electric Field Magnetic Field Power Density Averaging Time (MHz) Strength (V/m) Strength (A/m) (mW/cm2) (minutes) 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f²) 30 30–300 27.5 0.073 0.2 30 300–1500 / / f/1500 30 1500–100,000 / / 1.0 30 f = frequency in MHz; * = Plane-wave equivalent power density; According to §1.1310 and §2.1091 RF exposure is calculated. Calculated Formulary: Predication of MPE limit at a given distance S = PG/4πR² = power density (in appropriate units, e.g. mW/cm2); P = power input to the antenna (in appropriate units, e.g., mW); G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is normally numeric gain; R = distance to the center of radiation of the antenna (appropriate units, e.g., cm); Predication of MPE limit at a given distance S = PG/4πR² = power density (in appropriate units, e.g. mW/cm2); P = power input to the antenna (in appropriate units, e.g., mW); G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is normally numeric gain; R = distance to the center of radiation of the antenna (appropriate units, e.g., cm); For simultaneously transmit system, the calculated power density should comply with: FCC Part 15.407 Page 11 of 64

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.:RDG160806002-00B Calculated Data: Maximum Power Frequency Evaluation Power Antenna Gain Including MPE Limit Modes Range Distance Density Tolerance (mW/cm2) (MHz) (cm) (mW/cm2) (dBi) (numeric) (dBm) (mW) 1.4MHz 2403.5-2477.5 3.93 2.47 30 1000.00 20.00 0.4920 1.0 10MHz 2405.5-2477.5 3.93 2.47 30 1000.00 20.00 0.4920 1.0 20MHz 2410.5-2472.5 3.93 2.47 30 1000.00 20.00 0.4920 1.0 802.11b 2412-2462 3.93 2.47 25 316.23 20.00 0.1556 1.0 802.11g 2412-2462 3.93 2.47 25 316.23 20.00 0.1556 1.0 802.11n 1.0 2412-2462 3.93 2.47 25 316.23 20.00 0.1556 ht20 802.11a 5180-5825 5.05 3.20 16 39.81 20.00 0.0253 1.0 802.11n 5180-5825 5.05 3.20 16 39.81 20.00 0.0253 1.0 ht20 Note: The Maximum Power Including Tolerance was declared by manufacturer. All of the modes can`t transmit simultaneously. Result: Compliance, The device meet FCC MPE at 20 cm distance FCC Part 15.407 Page 12 of 64


Document Created: 2016-09-05 20:08:33
Document Modified: 2016-09-05 20:08:33
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC