Test Report

FCC ID: SS3-GL3581511

Test Report

Download: PDF
FCCID_2830954

FCC PART 15.249 TEST REPORT For SZ DJI TECHNOLOGY CO., LTD 14th floor, West Wing, Skyworth Semiconductor Design Building NO.18 Gaoxin South 4th Ave, Nanshan, Shenzhen, Guangdong, China FCC ID: SS3-GL3581511 Report Type: Product Type: Original Report Remote Controller Test Engineer: Allen Qiao Report Number: RDG151112003-00B Report Date: 2015-11-24 Sula Huang Reviewed By: RF Leader Test Laboratory: Bay Area Compliance Laboratories Corp. (Dongguan) No.69 Pulongcun, Puxinhu Industrial Zone, Tangxia, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Dongguan). This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0.

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG151112003-00B TABLE OF CONTENTS GENERAL INFORMATION .......................................................................................................................................3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) .....................................................................................3 OBJECTIVE ...................................................................................................................................................................3 RELATED SUBMITTAL(S)/GRANT(S) .............................................................................................................................3 TEST METHODOLOGY ..................................................................................................................................................3 TEST FACILITY .............................................................................................................................................................3 SYSTEM TEST CONFIGURATION ..........................................................................................................................4 JUSTIFICATION .............................................................................................................................................................4 EUT EXERCISE SOFTWARE ..........................................................................................................................................4 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................4 SUMMARY OF TEST RESULTS ...............................................................................................................................5 FCC§15.203 - ANTENNA REQUIREMENT..............................................................................................................6 APPLICABLE STANDARD ..............................................................................................................................................6 ANTENNA CONNECTOR CONSTRUCTION ......................................................................................................................6 FCC §15.207 (A) – AC LINE CONDUCTED EMISSIONS ......................................................................................7 APPLICABLE STANDARD ..............................................................................................................................................7 MEASUREMENT UNCERTAINTY ....................................................................................................................................7 EUT SETUP ..................................................................................................................................................................7 EMI TEST RECEIVER SETUP .........................................................................................................................................8 TEST PROCEDURE ........................................................................................................................................................8 CORRECTED AMPLITUDE & MARGIN CALCULATION ...................................................................................................8 TEST EQUIPMENT LIST AND DETAILS ...........................................................................................................................9 TEST RESULTS SUMMARY ............................................................................................................................................9 TEST DATA ..................................................................................................................................................................9 FCC§15.205, §15.209&§15.249- RADIATED EMISSIONS ....................................................................................12 APPLICABLE STANDARD ............................................................................................................................................12 MEASUREMENT UNCERTAINTY ..................................................................................................................................12 EUT SETUP ................................................................................................................................................................13 TEST EQUIPMENT SETUP ............................................................................................................................................14 TEST PROCEDURE ......................................................................................................................................................14 CORRECTED AMPLITUDE & MARGIN CALCULATION .................................................................................................14 TEST EQUIPMENT LIST AND DETAILS .........................................................................................................................15 TEST RESULTS SUMMARY ..........................................................................................................................................15 TEST DATA ................................................................................................................................................................15 FCC §15.215(C) – 20 DB BANDWIDTH TESTING ................................................................................................19 APPLICABLE STANDARD ............................................................................................................................................19 TEST PROCEDURE ......................................................................................................................................................19 TEST EQUIPMENT LIST AND DETAILS .........................................................................................................................19 TEST DATA ................................................................................................................................................................19 FCC§15.249(D) - OUT OF BAND EMISSION (50 DB ATTENUATION) ............................................................22 APPLICABLE STANDARD ............................................................................................................................................22 TEST PROCEDURE ......................................................................................................................................................22 TEST EQUIPMENT LIST AND DETAILS .........................................................................................................................22 TEST DATA ................................................................................................................................................................22 FCC Part 15.249 Page 2 of 23

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG151112003-00B GENERAL INFORMATION Product Description for Equipment under Test (EUT) The SZ DJI TECHNOLOGY CO., LTD’s product, model number: GL358wB (FCC ID: SS3-GL3581511) (the "EUT") in this report was a Remote Controller (Called C1 by applicant ), which measures approximately: 16.6 cm (L) x15.8 cm (W) x 8.9 cm(H), rated input voltage: DC 7.2V from lithium rechargeable battery or DC 17.4V from adapter. Adapter information: dji Model: A14-057N1A Input: AC 100-240V, 1.8A, 50-60Hz Output: DC 17.4V, 3.3A * All measurement and test data in this report was gathered from production sample serial number: 151112003. (Assigned by BACL.Dongguan). The EUT was received on 2015-11-13. Objective This type approval report is prepared on behalf of SZ DJI TECHNOLOGY CO., LTD in accordance with Part 2-Subpart J, and Part 15-Subparts A, B and C of the Federal Communications Commission’s rules. The tests were performed in order to determine compliance with FCC Part 15, Subpart C, and section 15.203, 15.205, 15.207, 15.209 and 15.249 rules. Related Submittal(s)/Grant(s) FCC Part 15C DTS submissions with FCC ID: SS3-GL3581511 Submitted with the Part of a system with ID: SS3-WM3251511 Test Methodology All measurements contained in this report were conducted with ANSI C63.10-2013, American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices. All radiated and conducted emissions measurement was performed at Bay Area Compliance Laboratories Corp. (Dongguan). Test Facility The Test site used by Bay Area Compliance Laboratories Corp. (Dongguan) to collect test data is located on the No.69 Pulongcun, Puxinhu Industrial Zone, Tangxia, Dongguan, Guangdong, China Test site at Bay Area Compliance Laboratories Corp. (Dongguan) has been fully described in reports submitted to the Federal Communications Commission (FCC). The details of these reports have been found to be in compliance with the requirements of Section 2.948 of the FCC Rules on February 06, 2015. The Federal Communications Commission has the reports on file and is listed under FCC Registration No.: 273710. The test site has been approved by the FCC for public use and is listed in the FCC Public Access Link (PAL) database. FCC Part 15.249 Page 3 of 23

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG151112003-00B SYSTEM TEST CONFIGURATION Justification The system was configured for testing in Engineering Mode, which was provided by the manufacturer. The system employed 16 channels in the frequency range 5738-5813MHz, which were provided by the manufacturer: Frequency Frequency Frequency Frequency Channel Channel Channel Channel (MHz) (MHz) (MHz) (MHz) 1 5738 5 5758 9 5778 13 5798 2 5743 6 5763 10 5783 14 5803 3 5748 7 5768 11 5788 15 5808 4 5753 8 5773 12 5793 16 5813 EUT was tested with Channel 5738 MHz, 5773 MHz and 5813 MHz EUT Exercise Software The software “DJI-RF Certification” was used in the test. The system configured maximum power as default setting. Block Diagram of Test Setup FCC Part 15.249 Page 4 of 23

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG151112003-00B SUMMARY OF TEST RESULTS FCC Rules Description of Test Result §15.203 Antenna Requirement Compliance §15.207(a) Conduction Emissions Compliance 15.205, §15.209, §15.249 Radiated Emissions Compliance §15.215 (c) 20 dB Bandwidth Compliance Outside of Band Emission §15.249(d) Compliance (50dB attenuation) FCC Part 15.249 Page 5 of 23

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG151112003-00B FCC§15.203 - ANTENNA REQUIREMENT Applicable Standard For intentional device, according to §15.203, an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used. Antenna Connector Construction The EUT has 2 internal antennas arrangement, the left antenna gain is 2.95dBi for 2.4G, the right antenna gain is 3.16dBi for 2.4G and 2.38dBi for 5.8G, fulfill the requirement of the item. Please refer to the internal photos. Result: Compliant. FCC Part 15.249 Page 6 of 23

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG151112003-00B FCC §15.207 (a) – AC LINE CONDUCTED EMISSIONS Applicable Standard FCC§15.207 Measurement Uncertainty Compliance or non- compliance with a disturbance limit shall be determined in the following manner： If Ulab is less than or equal to Ucispr of Table 1, then: –compliance is deemed to occur if no measured disturbance level exceeds the disturbance limit; –non - compliance is deemed to occur if any measured disturbance level exceeds the disturbance limit. If Ulab is greater than Ucispr of Table 1, then: –compliance is deemed to occur if no measured disturbance level, increased by (Ulab − Ucispr), exceeds the disturbance limit; –non - compliance is deemed to occur if any measured disturbance level, increased by (Ulab − Ucispr), exceeds the disturbance limit. Based on CISPR 16-4-2-2011, measurement uncertainty of conducted disturbance at mains port using AMN at Bay Area Compliance Laboratories Corp. (Dongguan) is 3.46 dB (150 kHz to 30 MHz). Table 1 – Values of Ucispr Measurement Ucispr Conducted disturbance at mains port using AMN (150 kHz to 30 MHz) 3.4 dB EUT Setup FCC Part 15.249 Page 7 of 23

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG151112003-00B The setup of EUT is according with per ANSI C63.10-2013 measurement procedure. The specification used was with the FCC Part 15.207 limits. The spacing between the peripherals was 10 cm. The adapter of laptop was connected to a 120 VAC/60 Hz power source. EMI Test Receiver Setup The EMI test receiver was set to investigate the spectrum from 150 kHz to 30 MHz. During the conducted emission test, the EMI test receiver was set with the following configurations: Frequency Range IF B/W 150 kHz – 30 MHz 9 kHz Test Procedure During the conducted emission test, the adapter of laptop was connected to the first LISN. Maximizing procedure was performed on the six (6) highest emissions of the EUT. All data was recorded in the Quasi-peak and average detection mode. Corrected Amplitude & Margin Calculation The basic equation is as follows: VC = VR + AC + VDF Cf = AC + VDF Herein, VC (cord. Reading): corrected voltage amplitude VR: reading voltage amplitude Ac: attenuation caused by cable loss VDF: voltage division factor of AMN Cf: Correction Factor The “Margin” column of the following data tables indicates the degree of compliance within the applicable limit. For example, a margin of 7dB means the emission is 7dB below the maximum limit. The equation for margin calculation is as follows: Margin = Limit – Corrected Amplitude FCC Part 15.249 Page 8 of 23

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG151112003-00B Test Equipment List and Details Serial Calibration Calibration Manufacturer Description Model Number Date Due Date R&S EMI Test Receiver ESCS 30 830245/006 2015-10-20 2016-10-20 R&S L.I.S.N ESH3-Z5 892107/021 2015-07-16 2016-07-15 R&S Two-line V-network ENV 216 3560.6550.12 2014-12-11 2015-12-11 R&S Test Software EMC32 Version8.53.0 N/A N/A * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Dongguan) attests that all calibrations have been performed, traceable to National Primary Standards and International System of Units (SI). Test Results Summary According to the recorded data in following table, the EUT complied with the FCC Part 15.207, with the worst margin reading of: 14.4 dB at 13.529825 MHz in the Neutral conducted mode Test Data Environmental Conditions Temperature: 27°C Relative Humidity: 53 % ATM Pressure: 100.6kPa The testing was performed by Allen Qiao on 2015-11-13 FCC Part 15.249 Page 9 of 23

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG151112003-00B Test Mode: Transmitting AC120 V, 60 Hz, Line: 80 70 Quasi-Peak Limit 60 Average Limit 50 Level in dBμ 40 30 20 10 0 150k 300 400 500 800 1M 2M 3M 4M 5M 6 8 10M 20M 30M Frequency in Hz Frequency Quasi Peak Bandwidth Corr. Margin Limit Line Comment (MHz) (dBμV) (kHz) (dB) (dB) (dBμV) 0.151200 47.3 9.000 L1 0.2 18.6 65.9 Compliance 0.312220 38.0 9.000 L1 0.2 21.9 59.9 Compliance 0.384091 35.7 9.000 L1 0.2 22.5 58.2 Compliance 0.499611 33.8 9.000 L1 0.2 22.2 56.0 Compliance 2.771062 35.4 9.000 L1 0.2 20.6 56.0 Compliance 13.422446 40.5 9.000 L1 0.7 19.5 60.0 Compliance Frequency Average Bandwidth Corr. Margin Limit Line Comment (MHz) (dBμV) (kHz) (dB) (dB) (dBμV) 0.681699 21.7 9.000 L1 0.2 24.3 46.0 Compliance 1.239175 25.1 9.000 L1 0.2 20.9 46.0 Compliance 1.310256 25.4 9.000 L1 0.2 20.6 46.0 Compliance 2.641698 26.0 9.000 L1 0.2 20.0 46.0 Compliance 4.997188 27.1 9.000 L1 0.3 18.9 46.0 Compliance 13.638064 33.5 9.000 L1 0.7 16.5 50.0 Compliance FCC Part 15.249 Page 10 of 23

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG151112003-00B AC120 V, 60 Hz, Neutral: 80 70 Quasi-Peak Limit 60 Average Limit 50 Level in dBμ 40 30 20 10 0 150k 300 400 500 800 1M 2M 3M 4M 5M 6 8 10M 20M 30M Frequency in Hz Frequency Quasi Peak Bandwidth Corr. Margin Limit Line Comment (MHz) (dBμV) (kHz) (dB) (dB) (dBμV) 0.156097 46.5 9.000 N 0.2 19.2 65.7 Compliance 0.262017 39.7 9.000 N 0.2 21.7 61.4 Compliance 0.454052 34.1 9.000 N 0.2 22.7 56.8 Compliance 0.879690 31.9 9.000 N 0.2 24.1 56.0 Compliance 4.840426 33.8 9.000 N 0.3 22.2 56.0 Compliance 13.529825 39.6 9.000 N 0.7 20.4 60.0 Compliance Frequency Average Bandwidth Corr. Margin Limit Line Comment (MHz) (dBμV) (kHz) (dB) (dB) (dBμV) 0.187494 31.1 9.000 N 0.2 23.0 54.1 Compliance 1.385415 23.8 9.000 N 0.3 22.2 46.0 Compliance 4.840426 25.9 9.000 N 0.3 20.1 46.0 Compliance 10.568557 28.0 9.000 N 0.4 22.0 50.0 Compliance 13.529825 35.6 9.000 N 0.7 14.4 50.0 Compliance 17.881783 29.3 9.000 N 1.2 20.7 50.0 Compliance FCC Part 15.249 Page 11 of 23

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG151112003-00B FCC§15.205, §15.209&§15.249- RADIATED EMISSIONS Applicable Standard As per FCC§15.249 (a), except as provided in paragraph (b) of this section, the field strength of emissions from intentional radiators operated within these frequency bands shall comply with the following: Fundamental Field strength of fundamental Field strength of harmonics frequency (millivolts/meter) (microvolts/meter) 902–928 MHz 50 500 2400–2483.5 MHz 50 500 5725–5875 MHz 50 500 24.0–24.25 GHz 250 2500 As per FCC§15.249 (c), Field strength limits are specified at a distance of 3 meters. (d) Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits in §15.209, whichever is the lesser attenuation. Measurement Uncertainty Compliance or non- compliance with a disturbance limit shall be determined in the following manner： If Ulab is less than or equal to Ucispr of Table 1, then: –compliance is deemed to occur if no measured disturbance level exceeds the disturbance limit; –non - compliance is deemed to occur if any measured disturbance level exceeds the disturbance limit. If Ulab is greater than Ucispr of Table 1, then: –compliance is deemed to occur if no measured disturbance level, increased by (Ulab − Ucispr), exceeds the disturbance limit; –non - compliance is deemed to occur if any measured disturbance level, increased by (Ulab − Ucispr), exceeds the disturbance limit. Based on CISPR 16-4-2: 2011, measurement uncertainty of radiated emission at a distance of 3m at Bay Area Compliance Laboratories Corp. (Dongguan) is: 30M~200MHz: 5.0 dB 200M~1GHz: 6.2 dB 1G~6GHz: 4.45 dB 6G~18GHz: 5.23 dB FCC Part 15.249 Page 12 of 23

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG151112003-00B Table 1 – Values of Ucispr Measurement Ucispr Radiated disturbance (electric field strength at an OATS or in a SAC) (30 MHz to 1000 MHz) 6.3 dB Radiated disturbance (electric field strength in a FAR) (1 GHz to 6 GHz) 5.2 dB Radiated disturbance (electric field strength in a FAR) (6 GHz to 18 GHz) 5.5 dB EUT Setup Below 1 GHz: Above 1 GHz: The radiated emission and out of band emission tests were performed in the 3 meters chamber test site, using the setup accordance with the ANSI C63.10-2013. The specification used was the FCC 15.209/15.205 and FCC 15.249 limits. FCC Part 15.249 Page 13 of 23

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG151112003-00B The external I/O cables were draped along the test table and formed a bundle 30 to 40 cm long in the middle. Test Equipment Setup The system was investigated from 30 MHz to 40 GHz. During the radiated emission test, the EMI test receiver & Spectrum Analyzer Setup were set with the following configurations: Frequency Range RBW Video B/W IF B/W Detector 30 MHz – 1000 MHz 120 kHz 300 kHz 120 kHz QP 1MHz 3 MHz / PK Above 1 GHz 1MHz 10 Hz / Ave. Test Procedure Maximizing procedure was performed on the highest emissions to ensure that the EUT complied with all installation combinations. All data was recorded in the Quasi-peak detection mode from 30MHz to 1GHz, Peak and average detection mode above 1 GHz. The above 1G test result shall be extrapolated to the specified distance using an extrapolation factor of 20dB/decade from 3m to 1.5m Distance extrapolation factor =20 log (specific distance [3m]/test distance [1.5m]) dB Extrapolation result = Corrected Amplitude (dBμV/m) - distance extrapolation factor (6dB) Corrected Amplitude & Margin Calculation The Corrected Amplitude is calculated by adding the Antenna Factor and Cable Loss, and subtracting the Amplifier Gain from the Meter Reading. The basic equation is as follows: Corrected Amplitude = Meter Reading + Antenna Factor + Cable Loss - Amplifier Gain The “Margin” column of the following data tables indicates the degree of compliance with the applicable limit. For example, a margin of 7dB means the emission is 7dB below the limit. The equation for margin calculation is as follows: Margin = Limit –Corrected Amplitude FCC Part 15.249 Page 14 of 23

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG151112003-00B Test Equipment List and Details Serial Calibration Calibration Manufacturer Description Model Number Date Due Date R&S EMI Test Receiver ESCI 100224 2015-08-03 2016-08-02 Sunol Antenna JB3 A060611-3 2014-11-06 2017-11-05 Sciences HP Amplifier 8447E 2434A02181 2015-09-01 2016-09-01 R&S Spectrum Analyzer E4440A SG43360054 2014-12-04 2015-12-04 ETS-Lindgren Horn Antenna 3115 9808-5557 2015-09-06 2018-09-06 ZVA-213- Mini-Circuit Amplifier 054201245 2015-02-19 2016-02-19 S+ R&S Spectrum Analyzer FSP 38 100478 2015-05-09 2016-05-09 Ducommun ARH-4223- 1007726-01 Horn Antenna 2014-06-16 2017-06-15 Technolagies 02 1304 Ducommun ARH-2823- 1007726-01 Horn Antenna 2014-06-16 2017-06-15 Technolagies 02 1302 QLW- Quinstar Amplifier 18405536- 15964001001 2015-09-06 2016-09-06 JO * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Dongguan) attests that all calibrations have been performed, traceable to National Primary Standards and International System of Units (SI). Test Results Summary According to the data in the following table, the EUT complied with the FCC Part 15.209 &15.205 & 15.249, with the worst margin reading of: 1.44 dB at 5773 MHz in the Vertical polarization Test Data Environmental Conditions Temperature: 26.1oC Relative Humidity: 54 % ATM Pressure: 101kPa The testing was performed by Allen Qiao on 2015-11-24. FCC Part 15.249 Page 15 of 23

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG151112003-00B Test Mode: Transmitting (the test distance is 1.5m for above 1GHz, 3m for below 1GHz) Receiver Rx Antenna Cable Amplifier Corrected Extrapolation Frequency result Limit Margin Reading Detector Polar Factor loss Gain Amplitude (MHz) (dBμV/m) (dBμV/m) (dB) (dBμV) (PK/QP/AV) (H/V) (dB(1/m)) (dB) (dB) (dBμV/m) Frequency: 5738MHz 5738 72.60 PK H 32.15 5.55 0.00 110.30 104.30 114.00 9.70 5738 80.30 PK V 32.15 5.55 0.00 118.00 112.00 114.00 2.00 5725 34.11 PK V 32.15 5.60 0.00 71.86 65.86 74.00 8.14 11476 29.33 PK V 37.88 8.92 26.15 49.98 43.98 74.00 30.02 17214 29.45 PK V 40.78 13.81 25.63 58.41 52.41 74.00 21.59 4625 32.32 PK V 30.13 5.23 27.34 40.34 34.34 74.00 39.66 4625 19.14 AV V 30.13 5.23 27.34 27.16 21.16 54.00 32.84 7475 31.83 PK V 34.74 6.93 26.07 47.43 41.43 74.00 32.57 7475 17.62 AV V 34.74 6.93 26.07 33.22 27.22 54.00 26.78 514.6 29.30 QP V 18.08 2.78 22.06 28.10 28.10 46.00 17.90 Frequency: 5773MHz 5773 73.21 PK H 32.15 5.48 0.00 110.84 104.84 114.00 9.16 5773 80.93 PK V 32.15 5.48 0.00 118.56 112.56 114.00 1.44 11546 29.53 PK V 37.90 8.93 26.09 50.27 44.27 74.00 29.73 17319 29.77 PK V 41.41 13.20 25.63 58.75 52.75 74.00 21.25 4625 32.70 PK V 30.13 5.23 27.34 40.72 34.72 74.00 39.28 4625 19.56 AV V 30.13 5.23 27.34 27.58 21.58 54.00 32.42 5365 32.89 PK V 31.83 5.58 27.01 43.29 37.29 74.00 36.71 5365 19.23 AV V 31.83 5.58 27.01 29.63 23.63 54.00 30.37 7475 32.27 PK V 34.74 6.93 26.07 47.87 41.87 74.00 32.13 7475 18.09 AV V 34.74 6.93 26.07 33.69 27.69 54.00 26.31 514.6 29.10 QP V 18.08 2.78 22.06 27.90 27.90 46.00 18.10 Frequency: 5813MHz 5813 72.29 PK H 32.16 5.61 0.00 110.06 104.06 114.00 9.94 5813 80.03 PK V 32.16 5.61 0.00 117.80 111.80 114.00 2.20 5875 32.42 PK V 32.18 5.97 0.00 70.57 64.57 74.00 9.43 11626 29.27 PK V 37.90 8.90 25.89 50.18 44.18 74.00 29.82 17439 29.36 PK V 42.13 12.50 25.51 58.48 52.48 74.00 21.52 4625 32.02 PK V 30.13 5.23 27.34 40.04 34.04 74.00 39.96 4625 19.06 AV V 30.13 5.23 27.34 27.08 21.08 54.00 32.92 7475 31.94 PK V 34.74 6.93 26.07 47.54 41.54 74.00 32.46 7475 17.67 AV V 34.74 6.93 26.07 33.27 27.27 54.00 26.73 514.6 29.70 QP V 18.08 2.78 22.06 28.50 28.50 46.00 17.50 *Within measurement uncertainty! FCC Part 15.249 Page 16 of 23

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG151112003-00B Field Strength (Average) Peak Duty Cycle Average Frequency Measurement Polar Correction Limit Margin Amp. (MHz) @ 3m (H/V) Factor (dBμV/m) (dB) (dBμV/m) (dB) (dBμV/m) Operating Frequency:5738 MHz 5738 104.30 H -22.63 81.67 94.00 12.33 5738 112.00 V -22.63 89.37 94.00 4.63 5725 65.86 V -22.63 43.23 54.00 10.77 11476 43.98 V -22.63 21.35 54.00 32.65 17214 52.41 V -22.63 29.78 54.00 24.22 Operating Frequency:5773 MHz 5773 104.84 H -22.63 82.21 94.00 11.79 5773 112.56 V -22.63 89.93 94.00 4.07 11546 44.27 V -22.63 21.64 54.00 32.36 17319 52.75 V -22.63 30.12 54.00 23.88 Operating Frequency:5813 MHz 5813 104.06 H -22.63 81.43 94.00 12.57 5813 111.80 V -22.63 89.17 94.00 4.83 5875 64.57 V -22.63 41.94 54.00 12.06 11626 44.18 V -22.63 21.55 54.00 32.45 17439 52.48 V -22.63 29.85 54.00 24.15 Note: Calculate Average value based on duty cycle correction factor: Duty cycle correction factor= 20*log (duty cycle) = 20*log (0.0739) = -22.63dB Conducted Peak Conducted Average Frequency Output Power Output Power (MHz) (dBm) (dBm) 5738 20.46 9.14 5773 19.55 8.23 5813 18.17 6.85 Note: Calculate Average value based on duty cycle correction factor: Duty cycle correction factor= 10*log (duty cycle) = 10*log (0.0739) = -11.31dB Ton Ton + T off Duty Cycle ms ms % 0.52 7.04 7.39 FCC Part 15.249 Page 17 of 23

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG151112003-00B Duty Cycle FCC Part 15.249 Page 18 of 23

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG151112003-00B FCC §15.215(c) – 20 dB BANDWIDTH TESTING Applicable Standard Intentional radiators operating under the alternative provisions to the general emission limits, as contained in §§ 15.217 through 15.257 and in Subpart E of this part, must be designed to ensure that the 20 dB bandwidth of the emission, or whatever bandwidth may otherwise be specified in the specific rule section under which the equipment operates, is contained within the frequency band designated in the rule section under which the equipment is operated. Test Procedure 1. Check the calibration of the measuring instrument using either an internal calibrator or a known signal from an external generator. 2. Position the EUT on the test table without connection to measurement instrument. Turn on the EUT. Then set it to any one convenient frequency within its operating range. Set a reference level on the measuring instrument equal to the highest peak value. 3. Measure the frequency difference of two frequencies that were attenuated 20 dB from the reference level. Record the frequency difference as the emission bandwidth. 4. Repeat above procedures until all frequencies measured were complete. Test Equipment List and Details Serial Calibration Calibration Manufacturer Description Model Number Date Due Date R&S Spectrum Analyzer FSP 38 100478 2015-05-09 2016-05-09 * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Dongguan) attests that all calibrations have been performed, traceable to National Primary Standards and International System of Units (SI). Test Data Environmental Conditions Temperature: 27.4 °C Relative Humidity: 59 % ATM Pressure: 100.8kPa * The testing was performed by Allen Qiao on 2015-11-14. Test Result: Compliant. Please refer to following tables and plots FCC Part 15.249 Page 19 of 23

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG151112003-00B Test Mode: Transmitting Frequency 20 dB Bandwidth Channel (MHz) (MHz) Low 5738 1.242 Middle 5773 1.242 High 5813 1.200 Low Channel FCC Part 15.249 Page 20 of 23

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG151112003-00B Middle Channel High Channel FCC Part 15.249 Page 21 of 23

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG151112003-00B FCC§15.249(d) - OUT OF BAND EMISSION (50 dB ATTENUATION) Applicable Standard Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits in §15.209, whichever is the lesser attenuation Test Procedure 1. Check the calibration of the measuring instrument using either an internal calibrator or a known signal from an external generator. 2. Position the EUT without connection to measurement instrument. Turn on the EUT and connect its antenna terminal to measurement instrument via a low loss cable. Then set it to any one measured frequency within its operating range, and make sure the instrument is operated in its linear range. 3. Set RBW to 100 kHz and VBW of spectrum analyzer to 300 kHz with a convenient frequency span including 100 kHz bandwidth from band edge. 4. Measure the highest amplitude appearing on spectral display and set it as a reference level. Plot the graph with marking the highest point and edge frequency. 5. Repeat above procedures until all measured frequencies were complete. Test Equipment List and Details Serial Calibration Calibration Manufacturer Description Model Number Date Due Date R&S Spectrum Analyzer FSP 38 100478 2015-05-09 2016-05-09 * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Dongguan) attests that all calibrations have been performed, traceable to National Primary Standards and International System of Units (SI). Test Data Environmental Conditions Temperature: 28.3 °C Relative Humidity: 59 % ATM Pressure: 101.1kPa * The testing was performed by Allen Qiao on 2015-11-20. Test Result: Compliant. Please refer to the following table and plots: Delta Peak to Band Emission Delta Limit Band Edge (dBc) (dBc) Left 49.23 50 Right 56.06 50 Note：The band edge emission compliant with the general radiated emission limits in §15.209, please refer to radiated emissions test section. FCC Part 15.249 Page 22 of 23

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG151112003-00B Band Edge, Left Side Band Edge, Right Side ***** END OF REPORT ***** FCC Part 15.249 Page 23 of 23


Document Created: 2015-12-04 10:19:59
Document Modified: 2015-12-04 10:19:59
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC