MPE

FCC ID: SS3-201309581

RF Exposure Info

Download: PDF
FCCID_2095682

Report No.: $Z13090014801 s uEt t RF EXPOSURE EVALUATION REPORT Issued to SZ DJ1 TECHNOLOGY CO., LTD For 5.8G Transmitte Model Name PVTS81 Trade Name : DJI Brand Name :; DJI FCC ID : $§3—201309581 Standard : 47CFR 2.1091 KDB 447498 DO1 General RF Exposure Guidance vO5r01 Test date : 2013—10—8 Issue date : 2013—10—10 Shenzhen MORLAB t nology Co., Ltd. Testedby___2, om Review ty ZAu Zhan Zou Jian Zhu Zhan (Test Engineer) (SAR Manager) Date 29 it ; 18. 19 Date ZUI;A /0 /0 SFi U (TAF GcrMx @Bluetooth OFTA jeg., haniinatles mrexer®se EMENR CC FCC ~o satr Cosre IEEE 1725 OTA The report refers only to the sample tested and does not apply o the bulk. This report is isued in confidence to the cient andit will bestritly treated as such by the Shenzhen MORLAR Communication Technology Co.. Lid.It may not be reproduced rather in ts entirety or i part and it may not be used for adverting. The client to whom the report is isaued may, hawever, show or sendi. or a certfied capythere of prepared bythe Shenthen MORLAB Telecommunication Co.,Lid to his GPRSer Supplier or others persons directly concerned. Shonzhen MORLAB Telecommunication Co,, Li will not, withoutthe consent of theclient enter into any discussion of correspondence with any third party concerning the contents ofthe report.Inthe event of the improper use ofthe report, Shenthen MORLAB Telecommunication Co., Lireserves the rights to withdrav iandto adlapt anyother remedies which maybe appropriate Shenzhen MORLAB Communication Technology Co. Ltd

SZ13090014S01 DIRECTORY DIRECTORY ................................................................................................................................... 2 1.TESTING LABORATORY ......................................................................................................... 3 1.1. Identification of the Responsible Testing Location .................................................................... 3 1.2. Accreditation Certificate ............................................................................................................. 3 2.TECHNICAL INFORMATION.................................................................................................. 4 2.1. Identification of Applicant .......................................................................................................... 4 2.2. Identification of Manufacturer .................................................................................................... 4 2.3. Equipment Under Test (EUT) ..................................................................................................... 4 2.3.1. Photographs of the EUT........................................................................................................... 4 2.3.2. Identification of all used EUT .................................................................................................. 4 2.4. Applied Reference Documents ................................................................................................... 5 3. DEVICE CATEGORY AND RF EXPOSURE LIMIT ............................................................ 6 4. MEASUREMENT OF CONDUCTED PEAK OUTPUT POWER. ....................................... 7 5. RF EXPOSURE EVALUATION ............................................................................................... 8 Change History Issue Date Reason for change 1.0 Oct. 10, 2013 First edition Page 2 of 8

SZ13090014S01 1.Testing Laboratory 1.1. Identification of the Responsible Testing Location Name: Shenzhen Morlab Communications Technology Co., Ltd. Morlab Laboratory Address: FL.3, Building A, FeiYang Science Park, No.8 LongChang Road, Block 67, BaoAn District, ShenZhen, GuangDong Province, P. R. China 518101 FCC Registration Number: 695796 1.2. Accreditation Certificate Accredited Testing Laboratory: No. CNAS L3572 Page 3 of 8

SZ13090014S01 2.Technical Information Note: the following data is based on the information by the applicant. 2.1. Identification of Applicant Company Name: SZ DJI TECHNOLOGY CO., LTD Address: Room 613、614, 6/F, HKUST SZ IER Bldg, No.9 Yuexing 1st Rd Hi-Tech Park(south), Nanshan District, Shenzhen, Guangdong, China 2.2. Identification of Manufacturer Company Name: SZ DJI TECHNOLGY CO., LTD (Baoan Branch) Address: Room 311~320,Office Bldg., Zhongyuntai Industrial Park, Songbai Rd., Shiyan Town, Bao'an District, Shenzhen, Guangdong, Chin 2.3. Equipment Under Test (EUT) Model Name: PVT581 Trade Name: DJI Brand Name: DJI Hardware Version: V2.0 Software Version: V1.0 Frequency Bands: 5.8GHz: 5728-5844 MHz Modulation Mode: 5.8GHz : GFSK Antenna type: External Monopole Antenna Development Stage: Identical prototype 2.3.1. Photographs of the EUT Please see for photographs of the EUT. 2.3.2. Identification of all used EUT The EUT identity consists of numerical and letter characters, the letter character indicates the test sample, and the following two numerical characters indicate the software version of the test sample. EUT Hardware Version Software Version Identity 1# V2.0 V1.0 Page 4 of 8

SZ13090014S01 2.4. Applied Reference Documents Leading reference documents for testing: No. Identity Document Title 1 47 CFR§2.1091 Radiofrequency Radiation Exposure Evaluation: mobile devices 2 KDB 447498 D01 General RF Exposure Guidance V05r01 Page 5 of 8

SZ13090014S01 3. Device Category and RF Exposure Limit Per user manual, this device is a wireless remote controller. Based on 47CFR 2.1091, this device belongs to mobile device category with General Population/Uncontrolled exposure. Mobile Devices: 47CFR 2.1091(b) For purposes of this section, a mobile device is defined as a transmitting device designed to be used in other than fixed locations and to generally be used in such a way that a separation distance of at least 20 centimeters is normally maintained between the transmitter's radiating structure(s) and the body of the user or nearby persons. In this context, the term “fixed location” means that the device is physically secured at one location and is not able to be easily moved to another location. Transmitting devices designed to be used by consumers or workers that can be easily re-located, such as wireless devices associated with a personal computer, are considered to be mobile devices if they meet the 20 centimeter separation requirement. GENERAL POPULATION / UNCONTROLLED EXPOSURE The general population/uncontrolled exposure limits are applicable to situations in which the general public may be exposed or in which persons who are exposed as a consequence of their employment may not be made fully aware of the potential for exposure or cannot exercise control over their exposure. Members of the general public would come under this category when exposure is not employment-related; for example, in the case of a wireless transmitter that exposes persons in its vicinity. Warning labels placed on low-power consumer devices such as cellular telephones are not considered sufficient to allow the device to be considered under the occupational/controlled category, and the general population/uncontrolled exposure limits apply to these devices. TABLE 1—LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Electric field Magnetic field Power Averaging range strength strength density time (MHz) (V/m) (A/m) (mW/cm2) (minutes) (B) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *(100) 30 1.34-30 824/f 2.19/f *(180/f2) 30 30-300 27.5 0.073 0.2 30 300-1500 f/1500 30 1500-100,000 1.0 30 f = frequency in MHz * = Plane-wave equivalent power density Page 6 of 8

SZ13090014S01 4. Measurement Of Conducted Peak Output Power. 1. 5.8GHz Conducted average output power Frequency Output Power(dBm) Band Channel (MHz) GFSK 1 5728 17.26 5.8GHz 8 5784 17.39 16 5844 17.69 Page 7 of 8

SZ13090014S01 5. RF Exposure Evaluation Standalone transmission MPE evaluation Bands Frequency Antenna Conducted Time-averaging Calculated to (MHz) Gain Average Power EIRP ERP (dBi) (dBm) (mW) (mW) 5.8GHz 5844 2.00 17.69 93.111 56.754 Note: Per 47CFR 2.1091(c) Mobile device are subject to routine environmental evaluation for RF exposure prior to equipment authorization or use if they operate at frequencies of 1.5 GHz or below and their effective radiated power (ERP) is 1.5 watts or more, or if they operate at frequencies above 1.5 GHz and their ERP is 3 watts or more. So standalone MPE evaluation is not required for 5.8GHz antenna. EIRP=P*G, ERP=EIRP-2.15dB Simultaneous transmission MPE evaluation There are only one 5.8GHz transmitter incorporated in this remote controller, so simultaneous transmission is not required. Page 8 of 8


Document Created: 2013-10-11 14:00:24
Document Modified: 2013-10-11 14:00:24
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC