Test Report

FCC ID: SS3-201309001

Test Report

Download: PDF
FCCID_2112313

Report No.: $Z13080123E02 \‘“‘Ill.,’lll /4 FCC TEST REP Issued to SZ DJI TECHNOLOGY CO., LTD. For 2.4G Bluetooth Datalink Model Name: LK24—BT Trade Name: DJI Brand Name: DJI FCC ID: $$3—201309001 Standard: 47 CFR Part 15 Subpart B Test date: September 16, 2013 — September 30, 2013 Issue date: November 1, 2013 €, 2 Tested by _YiG# KFrr‘l, 4 , S Review by lh/afi Xiao Xiong Huang Pulong (Test Engineer) (EMC Manager) Date 2a15 .|| . | oBB.1[. [ B t OBluetoot CC IEEE 1725 OTA BQTF Reg. No: 695796 The report refers onlyto the sample tested anddoes not apply to the bult. This report is isuedin confidence to the client andit will be strietly reatedas such by the Shenthon MORLAB Communication TechnologyCo—. Lid. It may not be reproduced rather in ts entietyor in part and it maynot be usedfor adverting. The elientto whom the report is issued may, hawever, showor send it or a certified capy there of prepared bythe Shenzhen MORLABTelecommunication Ca., Lid to his customer Supplieror others persons directly concerned. Shenzhen MORLAB Telecommunication Co., Ltd will not, without the consent of the client enter io n discussion ofcommespondence with anythind party concerning the contents ofthe report. In the event ofthe improperuse ofthe report, Shenzhen MORLAB Telecommunication Co., Lid reserves the rights to withdrav it and to adopt enother remedies which maybe appropriate Shenzhen MORLAB Communication Technology Co., Ltd FL—3, Building A. F i Scie rk, No 8 LongChang Road, Block BaoAn Distriet,

Report No.: SZ13080123E02 TABLE OF CONTENTS 1. GENERAL INFORMATION ....................................................................................................3 1.1 EUT Description .........................................................................................................................3 1.2 Test Standards and Results ........................................................................................................4 1.3 Facilities and Accreditations ......................................................................................................5 1.3.1 Facilities ....................................................................................................................................5 1.3.2 Test Environment Conditions ....................................................................................................5 1.3.3 Measurement Uncertainty .........................................................................................................5 2. TEST CONDITIONS SETTING...............................................................................................6 2.1 Test Mode ....................................................................................................................................6 2.2 Test Setup and Equipments List ................................................................................................7 2.2.1 Conducted Emission..................................................................................................................7 2.2.2 Radiated Emission .....................................................................................................................8 3. 47 CFR PART 15B REQUIREMENTS .................................................................................. 11 3.1 Conducted Emission ................................................................................................................. 11 3.1.1 Requirement ............................................................................................................................ 11 3.1.2 Test Description ...................................................................................................................... 11 3.1.3 Test Result ............................................................................................................................... 11 3.2 Radiated Emission ....................................................................................................................13 3.2.1 Requirement ............................................................................................................................13 3.2.2 Test Description ......................................................................................................................13 3.2.3 Frequency range of measurement ...........................................................................................13 3.2.4 Test Result ...............................................................................................................................14 ** END OF REPORT ** ......................................................................................................................16 Change History Issue Date Reason for change 1.0 November 1, 2013 First edition Page 2 of 16

Report No.: SZ13080123E02 1. GENERAL INFORMATION 1.1 EUT Description EUT Type .......................... 2.4G Bluetooth Datalink Serial No. .......................... (n.a., marked #1 by test site) Hardware Version ............. V1 Software Version ............... 1.0 Applicant........................... SZ DJI TECHNOLOGY CO., LTD. Room 613、614, 6/F, HKUST SZ IER Bldg, No.9 Yuexing 1st Rd Hi-Tech Park(South), Nanshan District, Shenzhen, Guangdong, China Manufacturer..................... SZ DJI TECHNOLOGY CO., LTD. 6F, HKUST SZ IER Bldg. No.9 Yuexing 1st Rd. Hi-Tech Park(South), Nanshan Dist. Shenzhen, Guangdong, China Modulation Type ............... GFSK Working Voltage ............... 12V Working Current ............... 0.2A Speed of the processor ... 100MHz Note: 1. The EUT is a 2.4G Bluetooth Datalink, it consists of the Air end and the Ground end, which provides reliable and stable remote wireless transmissions for Ground Station based application. The Ground end has a USB port for charging and updating software when connected with the PC. 2. Please refer to ANNEX A for the photographs of the EUT. For a more detailed description, please refer to Specification or User’s Manual supplied by the applicant and/or manufacturer. Page 3 of 16

Report No.: SZ13080123E02 1.2 Test Standards and Results The objective of the report is to perform testing according to 47 CFR Part 15 Subpart B: No. Identity Document Title 1 47 CFR Part 15(10-1-12 Edition) Radio Frequency Devices Test detailed items/section required by FCC rules and results are as below: No. Section Description Result 1 15.107 Conducted Emission PASS 2 15.109 Radiated Emission PASS NOTE: The tests were performed according to the method of measurements prescribed in ANSI C63.4-2009. Page 4 of 16

Report No.: SZ13080123E02 1.3 Facilities and Accreditations 1.3.1 Facilities Shenzhen Morlab Communications Technology Co., Ltd. Morlab Laboratory is a testing organization accredited by China National Accreditation Service for Conformity Assessment (CNAS) according to ISO/IEC 17025. The accreditation certificate number is L3572. All measurement facilities used to collect the measurement data are located at FL.3, Building A, FeiYang Science Park, No.8 LongChang Road, Block 67, BaoAn District, ShenZhen, GuangDong Province, P. R. China 518101. The test site is constructed in conformance with the requirements of ANSI C63.4-2009 and CISPR Publication 22:2010; the FCC registration number is 695796. 1.3.2 Test Environment Conditions During the measurement, the environmental conditions were within the listed ranges: Temperature (°C): 15 - 35 Relative Humidity (%): 30 - 60 Atmospheric Pressure (kPa): 86 -106 1.3.3 Measurement Uncertainty The uncertainty is calculated using the methods suggested in the "Guide to the Expression of Uncertainty in Measurement" (GUM) published by ISO. Uncertainty of Conducted Emission: ±1.8dB Uncertainty of Radiated Emission: ±3.1dB Page 5 of 16

Report No.: SZ13080123E02 2. TEST CONDITIONS SETTING 2.1 Test Mode The EUT configuration of the emission tests is EUT + PC. During the measurement, the Ground end was connected with a PC through the USB port, it powered by the PC and worked as unintentional equipments. Page 6 of 16

Report No.: SZ13080123E02 2.2 Test Setup and Equipments List 2.2.1 Conducted Emission A. Test Setup: < 40cm > < 80cm > EUT Pulse Limiter < 80cm > LISN Receiver The EUT is placed on a 0.8m high insulating table, which stands on the grounded conducting floor, and keeps 0.4m away from the grounded conducting wall. The EUT is connected to the power mains through a LISN which provides 50Ω/50µH of coupling impedance for the measuring instrument. A Pulse Limiter is used to protect the measuring instrument. The factors of the whole test system are calibrated to correct the reading. B. Equipments List: Description Manufacturer Model Serial No. Cal. Date Due. Date EMC Analyzer Agilent E7405A US44210471 12/05/2013 11/05/2014 Receiver Narda PMM 9010 595WX11007 12/11/2012 11/11/2013 LISN Schwarzbeck NSLK 8127 812744 12/05/2013 11/05/2014 Pulse Limiter (20dB) Schwarzbeck VTSD 9391 (n.a.) (n.a.) 9561-D System Simulator Agilent E5515C GB43130131 12/05/2013 11/05/2014 PC Lenovo ThinkPadT61 ZZF3077 (n.a.) (n.a.) Page 7 of 16

Report No.: SZ13080123E02 2.2.2 Radiated Emission A. Test Setup: 1) For radiated emissions from 9kHz to 30MHz 2) For radiated emissions from 30MHz to1GHz Page 8 of 16

Report No.: SZ13080123E02 3) For radiated emissions above 1GHz The test is performed in a 3m Semi-Anechoic Chamber; the antenna factor, cable loss and so on of the site (factors) is calculated to correct the reading. The EUT is placed on a 0.8m high insulating Turn Table, and keeps 3m away from the Test Antenna, which is mounted on a variable-height antenna master tower. For the test Antenna: 1) In the frequency range of 9KHz to 30MHz, magnetic field is measured with Loop Test Antenna. The Test Antenna is positioned with its plane vertical at 1m distance from the EUT. The center of the Loop Test Antenna is 1m above the ground. During the measurement the Loop Test Antenna rotates about its vertical axis for maximum response at each azimuth about the EUT. 2) In the frequency range above 30MHz, Bi-Log Test Antenna (30MHz to 1GHz) and Horn Test Antenna (above 1GHz) are used. Test Antenna is 3m away from the EUT. Test Antenna height is varied from 1m to 4m above the ground to determine the maximum value of the field strength. The emission levels at both horizontal and vertical polarizations should be tested. B. Equipments List: Description Manufacturer Model Serial No. Cal. Date Due. Date EMC Analyzer Agilent E7405A US44210471 12/05/2013 11/05/2014 Semi-Anechoic Albatross 9m*6m*6m (n.a.) 12/05/2012 11/05/2014 Chamber Test Antenna - Bi-Log Schwarzbeck VULB 9163 9163-274 12/05/2012 11/05/2014 Page 9 of 16

Report No.: SZ13080123E02 Description Manufacturer Model Serial No. Cal. Date Due. Date Test Antenna - Horn Schwarzbeck BBHA 9120D 9120D-963 12/05/2012 11/05/2014 Test Antenna -Loop Schwarzbeck FMZB 1519 1519-022 12/05/2012 11/05/2014 PC Lenovo ThinkPadT61 ZZF3077 (n.a.) (n.a.) Page 10 of 16

Report No.: SZ13080123E02 3. 47 CFR PART 15B REQUIREMENTS 3.1 Conducted Emission 3.1.1 Requirement According to FCC section 15.107, the radio frequency voltage that is conducted back onto the AC power line on any frequency within the band 150kHz to 30MHz shall not exceed the limits in the following table, as measured using a 50µH/50Ω line impedance stabilization network (LISN). Conducted Limit (dBµV) Frequency range (MHz) Quasi-peak Average 0.15 - 0.50 66 to 56 56 to 46 0.50 - 5 56 46 5 - 30 60 50 NOTE: a) The limit subjects to the Class B digital device. b) The lower limit shall apply at the band edges. c) The limit decreases linearly with the logarithm of the frequency in the range 0.15 - 0.50MHz. 3.1.2 Test Description See section 2.2.1 of this report. 3.1.3 Test Result The maximum conducted interference is searched using Peak (PK), Quasi-peak (QP) and Average (AV) detectors; the emission levels more than the AV and QP limits, and that have narrow margins from the AV and QP limits will be re-measured with AV and QP detectors. Tests for both L phase and N phase lines of the power mains connected to the EUT are performed. All test modes are considered, refer to recorded points and plots below. 3.1.3.1 Test Mode A. Test Plot and Suspicious Points: Page 11 of 16

Report No.: SZ13080123E02 (Plot A: L Phase) (Plot B: N Phase) Test Result: PASS Page 12 of 16

Report No.: SZ13080123E02 3.2 Radiated Emission 3.2.1 Requirement According to FCC section 15.109(a)(e), the field strength of radiated emissions from unintentional radiators at a distance of 3 meters shall not exceed the following values: Frequency Field Strength Field Strength Limitation at 3m Measurement Dist range (MHz) µV/m Dist (uV/m) (dBuV/m) 0.009 - 0.490 2400/F(KHz) 300m 10000* 2400/F(KHz) 20log 2400/F(KHz) + 80 0.490 - 1.705 2400/F(KHz) 30m 100* 2400/F(KHz) 20log 2400/F(KHz) + 40 1.705 - 30.00 30 30m 100*30 20log 30 + 40 30.0 - 88.0 100 3m 100 20log 100 88.0 - 216.0 150 3m 150 20log 150 216.0 - 960.0 200 3m 200 20log 200 Above 960.0 500 3m 500 20log 500 Note: The limits of frequency below 30MHz is quoted from FCC section 15.209. As shown in FCC section 15.35(b), for frequencies above 1000MHz, the field strength limits are based on average detector. When average radiated emission measurements are specified in this part, including emission measurements below 1000MHz, there also is a limit on the radio frequency emissions, as measured using instrumentation with a peak detector function, corresponding to 20dB above the maximum permitted average limit for the frequency being investigated unless a different peak emission limit is otherwise specified in the rules. Note: 1) The tighter limit shall apply at the boundary between two frequency range. 2) Limitation expressed in dBuV/m is calculated by 20log Emission Level(uV/m). 3) If measurement is made at 3m distance, then F.S Limitation at 3m distance is adjusted by using the formula of Ld1 = Ld2 * (d2/d1)2. Example: F.S Limit at 30m distance is 30uV/m, then F.S Limitation at 3m distance is adjusted as Ld1 = L1 = 30uV/m * (10)2 = 100 * 30uV/m 3.2.2 Test Description See section 2.2.2 of this report. 3.2.3 Frequency range of measurement Highest frequency generated or used in the device is the highest speed of the processor, lowest Page 13 of 16

Report No.: SZ13080123E02 frequency generated or used in the device is the lowest frequency of the oscillator. According to 15.33(b)(1), the frequency range of radiated measurement for the EUT is listed in the following table: Frequency range of radiated Frequency Frequency generated or used in the device measurement in the report Highest 100MHz 1GHz 3.2.4 Test Result The maximum radiated emission is searched using PK, QP and AV detectors; the emission levels more than the limits, and that have narrow margins from the limits will be re-measured with AV and QP detectors. Both the vertical and the horizontal polarizations of the Test Antenna are considered to perform the tests. All test modes are considered, refer to recorded points and plots below. The amplitude of spurious emissions which are attenuated more than 20 dB below the permissible value need not be reported. Note: All radiated emission tests were performed in X, Y, Z axis direction, and only the worst axis test condition was recorded in this test report. B. Test Plots and Suspicious Points: NOTE: The emissions are too small to be measured and are at least 6 dB below the limit, So all the data of marked are pass. 150DBuV No Frequency PeakAp QP-Limit AV-Limit Quasi-P Avera-P Result 1 84 K 49.38 DBuV 109.11 -- -- -- -- 2 130DBuV 23.87 M 42.63 DBuV 69.50 -- -- -- -- 110DBuV 90DBuV 70DBuV 1 50DBuV 2 30DBuV 10DBuV -10DBuV -30DBuV 9K10K 20K 30K 40K 50K60K70K80K 90K 100K 200K 300K 400K500K600K 700K 800K 900K 1M 2M 3M 4M 5M 6M 7M8M9M10M 20M 30M (Plot A: 9K – 30M) Page 14 of 16

Report No.: SZ13080123E02 (Plot B: 30MHz – 1GHz, Test Antenna Vertical) NO. Fre. Pk QP AV Limit Limit- Limit- Antenna Verdict (MHz) -PK QP AV 1 170.299 N.A 30.35 N.A N.A 43.5 N.A Vertical Pass 2 201.746 N.A 28.94 N.A N.A 43.5 N.A Vertical Pass 3 342.045 N.A 30.80 N.A N.A 46.0 N.A Vertical Pass 4 455.736 N.A 39.78 N.A N.A 46.0 N.A Vertical Pass 5 508.953 N.A 36.37 N.A N.A 46.0 N.A Vertical Pass 6 755.686 N.A 36.29 N.A N.A 46.0 N.A Vertical Pass Page 15 of 16

Report No.: SZ13080123E02 (Plot C: 30MHz – 1GHz, Test Antenna Horizontal) NO. Fre. Pk QP AV Limit- Limit- Limit- Antenna Verdict (MHz) PK QP AV 1 148.529 N.A 34.18 N.A N.A 43.5 N.A Horizontal Pass 2 179.975 N.A 36.57 N.A N.A 43.5 N.A Horizontal Pass 3 293.666 N.A 34.24 N.A N.A 46.0 N.A Horizontal Pass 4 610.549 N.A 37.74 N.A N.A 46.0 N.A Horizontal Pass 5 755.686 N.A 38.81 N.A N.A 46.0 N.A Horizontal Pass 6 970.973 N.A 39.87 N.A N.A 54.0 N.A Horizontal Pass Test Result: Pass ** END OF REPORT ** Page 16 of 16


Document Created: 2013-11-01 12:07:32
Document Modified: 2013-11-01 12:07:32
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC