User manual

FCC ID: SRMT11012710

Users Manual

Download: PDF
FCCID_4067379

BOI R&D Department Doc Name Sugarloaf User Manual Rev.0 Rev 0 Page 1 of 10 Subject User Manual for external lab TUV Doc No Author Eunice Law Created 12th January, 2018 CC Michael, DY, KK Ma Status Initial Release VizComm View TempTale GEO Eagle 3G Real Time Tracking Temperature Monitor User Manual Rev.0 Rev No Revision Details By Date 0 New Release Eunice Law 12-Jan-2018 ** BOI Confidential Proprietary Information **

BOI R&D Department Doc Name Sugarloaf User Manual Rev.0 Rev 0 Page 2 of 10 Subject User Manual for external lab TUV Doc No Author Eunice Law Created 12th January, 2018 CC Michael, DY, KK Ma Status Initial Release Operating Description Temp Tale GEO Eagle 3G (Global) is real-time tracking device to monitor health of perishable goods product during transit period inside container truck or sea onboard ocean containers. The tracking device reports remotely its temperature history and location information in periodic intervals to a remote server. The device are consist of temperature sensor, light sensor, status LED’s, 2push button switches, battery level sensor, non-volatile storage EEPROM memory and 3G/2G modem module for internet connectivity to transmit data (no voice application required). The application of cellular data transmission is active only when the device is within land geographical areas with cellular towers. In areas with poor signal or no 3G network, the 3G modem has a 2G fallback feature to switch over 2G network to continue its data reporting to remote server. For ocean container condition, the tracking device shall set to a timer mode with disabled cellular data transmission and device goes to sleep mode, while the temperature recording is still active that wakes up in a specific time intervals to record temperature data w/o cellular data transmission. It was envisioned that this product will be used in a variety of transport situations, varying from short parcel delivery trips. The rate at which the devices logs and reports data will be variable in order to allow usage flexibility of battery and memory consumption to accommodate different trip durations, but the following use cases were defined in some transportation scenarios in the table below. OTR Temperature GSM Tower Temperature Recording Intervals Reporting Intervals accuracy Food 7 days 15mins 15mins customers 17 days 15mins 30mins - 20 to +85 °C ± 0.5C 26 days 15mins 60mins Frozen 7 days 15mins 15mins Food - 30 to +85 °C ± 0.5C 17 days 15mins 30mins customers 26 days 15mins 60mins Ocean 90 days 60mins 60mins - 20 to +85 °C ± 0.5C container ** BOI Confidential Proprietary Information **

BOI R&D Department Doc Name Sugarloaf User Manual Rev.0 Rev 0 Page 3 of 10 Subject User Manual for external lab TUV Doc No Author Eunice Law Created 12th January, 2018 CC Michael, DY, KK Ma Status Initial Release Below illustration is an activated real-time tracking device inside a container truck transporting food stuffs in various domestic areas. Internet TCP data Cell Tower Cell Tower Telecom central office AT&T or T-Mobile subscriptions Location and Temperature data reports TTGeoEagle Frozen Sensitech CS Tracks Server Command Center ** BOI Confidential Proprietary Information **

BOI R&D Department Doc Name Sugarloaf User Manual Rev.0 Rev 0 Page 4 of 10 Subject User Manual for external lab TUV Doc No Author Eunice Law Created 12th January, 2018 CC Michael, DY, KK Ma Status Initial Release Applicant Information Company Name: SENSITECH Inc. Address: 800 Cummings Center # 258X, Beverly, MA 01915 Manufacturer Information Company Name: SENSITECH Inc. Address: 800 Cummings Center # 258X, Beverly, MA 01915 Importer Information Company Name: XXXXXXXXXXX Address: XXXXXXXXXXXXXXXXXX Product General Description  Product Name  TempTale GEO Eagle  Model Name  T11012710  Operating Voltage:  Extreme Low: 4.8V  Normal: 6V  Extreme High: 7.5V  Operating Temperature:  Extreme Low: -20℃  Nominal: 25℃  Extreme High: 55℃  Frequency of oscillator  32.768kHz ** BOI Confidential Proprietary Information **

BOI R&D Department Doc Name Sugarloaf User Manual Rev.0 Rev 0 Page 5 of 10 Subject User Manual for external lab TUV Doc No Author Eunice Law Created 12th January, 2018 CC Michael, DY, KK Ma Status Initial Release  Type of Antenna  PCB Trace antenna  Antenna frequency  GSM850  EGSM900  GSM1800  GSM1900  UMTS800  UMTS850  UMTS900  UMTS1900  UMTS2100  FCC ID  SRMT11012710  IC  10224A-201510UC20 ** BOI Confidential Proprietary Information **

BOI R&D Department Doc Name Sugarloaf User Manual Rev.0 Rev 0 Page 6 of 10 Subject User Manual for external lab TUV Doc No Author Eunice Law Created 12th January, 2018 CC Michael, DY, KK Ma Status Initial Release RF Specifications Note: mentioned specifications are in the Quectel’s UC20G 3G module for reference 1. Operating Frequencies Quad band GSM operating frequencies 850/900/1800/1900MHz Dual-band UMTS operating frequencies 800/850/900/1900/2100MHz Band Frequencies Receive Transmit GSM 850MHz 869–894MHz 824–849MHz EGSM 1900MHz 925–960MHz 880–915MHz DCS 1800MHz 1805–1880MHz 1710–1785MHz PCS 1900MHz 1930–1990MHz 1850–1910MHz UMTS 800MHz 875-885MHz 830-840MHz UMTS 850MHz 869–894MHz 824–849MHz UMTS 900MHz 925-960MHz 880-915MHz UMTS 1900MHz 1930–1990MHz 1850–1910MHz UMTS 2100MHz 2110-2170MHz 1920-1980MHz 2. Antenna Requirement Type Requirements Frequency Range  GSM850/900/1800/1900MHz  UMTS800MHz/UMTS850MHz/UMTS900MHz/ UMTS1900MHz/UMTS2100MHz VSWR <2 Max Input Power 50W Input Impedance 50Ω Polarization Vertical 3. TRP Requirements Frequency Min GSM850 +25dBm EGSM900 +25dBm DCS1800 +25dBm PCS1900 +25dBm UMTS800 +25dBm UMTS850 +25dBm UMTS900 +25dBm UMTS1900 +25dBm UMTS2100 +25dBm ** BOI Confidential Proprietary Information **

BOI R&D Department Doc Name Sugarloaf User Manual Rev.0 Rev 0 Page 7 of 10 Subject User Manual for external lab TUV Doc No Author Eunice Law Created 12th January, 2018 CC Michael, DY, KK Ma Status Initial Release 4. TIS Requirements Frequency Min Sensitivity GSM850 < –105dBm EGSM900 < –105dBm DCS1800 < –105dBm PCS1900 < –105dBm UMTS800 < –107dBm UMTS850 < –107dBm UMTS900 < –107dBm UMTS1900 < –107dBm UMTS2100 < –107dBm 5. Module Conducted RF Power Frequency Max GSM850 +33dBm EGSM900 +33dBm DCS1800 +30dBm PCS1900 +30dBm UMTS2100 +24dBm UMTS1900 +24dBm UMTS900 +24dBm UMTS850 +24dBm UMTS800 +24dBm ** BOI Confidential Proprietary Information **

BOI R&D Department Doc Name Sugarloaf User Manual Rev.0 Rev 0 Page 8 of 10 Subject User Manual for external lab TUV Doc No Author Eunice Law Created 12th January, 2018 CC Michael, DY, KK Ma Status Initial Release User Interface Green LED: 1. Mode status 16 blinks – Un-configured device 8 blinks – Start-up delay Mode 4 blinks – Sleep Mode Red LED: 2 blinks – Run Mode Error LED blinks when it comes true into 3 conditions: 1 blink – Stop Mode 1. Low Battery 2. No SIM card 3. Modem failed in self-test 2. Self-Test rapid blinking approx. 30s 3. Transmit Busy 5s blinking interval for less than 2mins. Start/Stop Button: Starting the device: 1. If device is not started, pressed START button will activate device immediately if Start Key option is disabled. 2. If device is not started, pressed hold START button for 3s will activate device if Start Key Status Button: option is enabled. When pressed will activate status LED. Stopping the device: 1. If device had been started, pressed START button will de-activate device immediately if Stop Key option is enabled. 2. If device had been started, pressed hold START button for 5s will de-activate device if Stop Key delay option is enabled. Light Sensor peephole: Light status will be checked 30s sampling interval. Response is unnoticeable to user. ** BOI Confidential Proprietary Information **

BOI R&D Department Doc Name Sugarloaf User Manual Rev.0 Rev 0 Page 9 of 10 Subject User Manual for external lab TUV Doc No Author Eunice Law Created 12th January, 2018 CC Michael, DY, KK Ma Status Initial Release Auto-Answer Operating Instruction Step 1: Press “START/STOP” button (bottom at right hand side) and hold 5s, the GREEN and RED LEDs simultaneously blink for 30s. It enters initial state. Step 2: After 30s, the GREEN and RED LEDs stop blinking and turn off. It begins auto-answering mode. It is waiting a call and it can answer the call automatically. You can press “STATUS” button (Bottom at left hand side) to see GREEN LED blinking two times. It represents the device enters start mode. Step 3: In order to save battery, press “START/STOP” button and hold 5s to stop auto- answering when testing is completed. After pressing the button, you can see RED LED will blink two times to show the device entering stop mode already. ** BOI Confidential Proprietary Information **

BOI R&D Department Doc Name Sugarloaf User Manual Rev.0 Rev 0 Page 10 of 10 Subject User Manual for external lab TUV Doc No Author Eunice Law Created 12th January, 2018 CC Michael, DY, KK Ma Status Initial Release FCC Warning FCC Statements: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that my cause undesired operation. MODIFICATION: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the device. IC Statements: -English: This device complies with Industry Canada RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. -French: Leprésent appareil est conforme aux CNR d'Industrie Canada applicable aux appareils radio Exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement." ** BOI Confidential Proprietary Information **

BOI R&D Department Doc Name Sugarloaf User Manual Rev.0 Rev 0 Page 11 of 10 Subject User Manual for external lab TUV Doc No Author Eunice Law Created 12th January, 2018 CC Michael, DY, KK Ma Status Initial Release Safety Warning  Battery Warning Label a) Risk of explosion if battery is replaced by an incorrect type b) Dispose of used batteries according to the instructions c) Use only the types of the batteries which are indicated in this manual  Safety Use Distance  7-10 meters  Antenna Safety Use Distance  To comply with FCC/IC/CE RF exposure limits for general population / uncontrolled exposure, under normal use conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 31 cm from all persons ** BOI Confidential Proprietary Information **


Document Created: 2018-09-12 22:42:50
Document Modified: 2018-09-12 22:42:50
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC