RF Exposure

FCC ID: SQ9XKT1291

RF Exposure Info

Download: PDF
FCCID_2031145

INTERTEK TESTING SERVICES For Standalone SAR test exclusion consideration, when the corresponding SAR Exclusion Threshold requirement in KDB 447498 is satisfied, standalone SAR evaluation for general population exposure conditions, by measurement or numerical simulation is not required. Description the tested model: XKT1291 EUT Description : 2.4GHz Transceiver Model : XKT1291 Operating Configuration(s) : Table-top Operating mode (s) : Data Transmission Device Category : Portable Device Tx Frequency : 2422 – 2460 MHz Production tolerance : -6 dBm (Minimum) to 0 dBm (Maximum) Antenna gain : 0 dBi = 1.00 (num gain) Maximum source-based time- : 12.00% = (0.96/8 x100%) averaging duty factor Minimum separation distance : 5 mm FCC KDB 447498 D01 Applicable FCC KDB : FCC KDB 865664 D02 From above data, the source-based time-averaging output power is as follow: The Maximum Conducted Power = 0 dBm = 1.0 mW The Maximum conducted Power source-based time-averaging output power = (1.0 * 0.1200) mW = 0.120 mW In the frequency range of 100MHz to 6GHz and test separation distance ≤ 50mm, the SAR Exclusion Threshold will be determined as follow, The SAR exclusion threshold = 3.0  TD  / F (GHz ) = 9.56 mW where TD = 5 mm and F(GHz) = 2.46 GHz Conclusion Since the calculated conducted source-based time-averaged output power is 0.120 mW, which is less than the SAR Exclusion Threshold at 5mm test separation distance 9.56 mW for general population and uncontrolled exposure, standalone SAR evaluation for general population exposure conditions, by measurement or numerical simulation is not required. FCC ID: SQ9XKT1291 RF exposure - 1 of 1


Document Created: 2013-07-31 10:41:14
Document Modified: 2013-07-31 10:41:14
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC