Test Report

FCC ID: SQ9XKT1291

Test Report

Download: PDF
FCCID_2031143

Issuing Laboratory: Intertek Testing Services Hong Kong Limited Hong Kong Accreditation Service (HKAS) has accredited this laboratory under the Hong Kong Laboratory Accreditation Scheme (HOKLAS) for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. The results aasds shown in this report were determined by this laboratory in accordance with its terms of Ts accreditation. TEST REPORT Report No.: 13051 267HKG—001 Hallmark Cards, Inc. Application For Certification (Original Grant) (FCC ID: SQ9XKT1291) (IC: 5768A—XKT1291) Transceiver . Prepared and Checked by: Approved by: Lag Chin Yu, Befiny Nip Ming Fung, Melvin Lead Engineer Assistant Manager Date: Jne 25, 2013 — The test report only ailows to be revised within the retention period unless further standard or the requirement was noticed. — This report is for the exclusive use of Intertek‘s Client and is provided pursuant to the agreement between Intertek and its Client. Interte‘s responsibilty and liabilty are limited to the terms and conditions of the agreemont. Interlek assumes no fiabiity to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage eccasioned by the use of this report, Only the Client is authorized to perrnit copying or distribution of this report and then only in its entirely. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or servica must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the semple tested, This report by itself does not imply that the material, product, or serviceis or has ever been under an Interte certification program. Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8688 Far: (662) 27885 6487 Website: www.hkintertel—etlsemko.com

Issuing Laboratory: Intertek Testing Services Hong Kong Limited Hong Kong Accreditation Service (HKAS) has accredited this laboratory under the Hong Kong Laboratory Accreditation Scheme (HOKLAS) for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. The results shown in this report were determined by this laboratory in accordance with its terms of accreditation. GENERAL INFORMATION Hallmark Cards, Inc. BRAND NAME: Hallmark, MODEL: XKT1291 FCC ID: SQ9XKT1291 IC: 5768A-XKT1291 Grantee: Hallmark Cards, Inc. Grantee Address: 2501 McGee, MD 166, PO Box 419580, Missouri, Kansas City, U.S.A. Contact Person: Ronald Carlson/ Phu Dang Tel: 816 5074150 Fax: N/A e-mail: rcarlson@hallmark.com / pdang2@hallmark.com Manufacturer: Jetta Company Limited Manufacturer Address: Jetta House, 19 On Kui Street, On Lok Tsuen, Fanling, Hong Kong. Brand Name: Hallmark Model: XKT1291 Type of EUT: Transceiver Description of EUT: Disney Continuity Mickey Serial Number: N/A FCC ID / IC: SQ9XKT1291 / 5768A-XKT1291 Date of Sample Submitted: May 23, 2013 Date of Test: May 29-30, 2013 Report No.: 13051267HKG-001 Report Date: June 25, 2013 Environmental Conditions: Temperature: +10 to 40°C Humidity: 10 to 90% Report No.: 13051267HKG-001 i FCC ID: SQ9XKT1291 IC: 5768A-XKT1291 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com

Issuing Laboratory: Intertek Testing Services Hong Kong Limited Hong Kong Accreditation Service (HKAS) has accredited this laboratory under the Hong Kong Laboratory Accreditation Scheme (HOKLAS) for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. The results shown in this report were determined by this laboratory in accordance with its terms of accreditation. SUMMARY OF TEST RESULT Hallmark Cards, Inc. BRAND NAME: Hallmark, MODEL: XKT1291 FCC ID: SQ9XKT1291 IC: 5768A-XKT1291 TEST SPECIFICATION REFERENCE RESULTS 15.249 / Transmitter Field Strength and Bandwidth Requirement Pass RSS-210 A2.9 The equipment under test is found to be complying with the following standards: FCC Part 15, October 1, 2011 Edition RSS-210 Issue 8, December 2010 RSS-Gen Issue 3, December 2010 Note: 1. The EUT uses a permanently attached antenna which, in accordance to section 15.203, is considered sufficient to comply with the pervisions of this section. 2. Pursuant to FCC part 15 Section 15.215(c), the 20 dB bandwidth of the emission was contained within the frequency band designated (mentioned as above) which the EUT operated. The effects, if any, from frequency sweeping, frequency hopping, other modulation techniques and frequency stability over excepted variations in temperature and supply voltage were considered. Report No.: 13051267HKG-001 ii FCC ID: SQ9XKT1291 IC: 5768A-XKT1291 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com

Issuing Laboratory: Intertek Testing Services Hong Kong Limited Hong Kong Accreditation Service (HKAS) has accredited this laboratory under the Hong Kong Laboratory Accreditation Scheme (HOKLAS) for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. The results shown in this report were determined by this laboratory in accordance with its terms of accreditation. Table of Contents 1.0 General Description ............................................................................................ 1 1.1 Product Description ........................................................................................... 1 1.2 Related Submittal(s) Grants ............................................................................... 1 1.3 Test Methodology .............................................................................................. 1 1.4 Test Facility ....................................................................................................... 1 2.0 System Test Configuration ................................................................................. 2 2.1 Justification........................................................................................................ 2 2.2 EUT Exercising Software ................................................................................... 2 2.3 Special Accessories........................................................................................... 2 2.4 Equipment Modification...................................................................................... 2 2.5 Measurement Uncertainty .................................................................................. 2 2.6 Support Equipment List and Description............................................................. 2 3.0 Emission Results ................................................................................................ 3 3.1 Field Strength Calculation .................................................................................. 3 3.2 Radiated Emission Configuration Photograph .................................................... 4 3.3 Radiated Emission Data .................................................................................... 4 4.0 Equipment Photographs..................................................................................... 8 5.0 Product Labelling ................................................................................................ 8 6.0 Technical Specifications..................................................................................... 8 7.0 Instruction Manual .............................................................................................. 8 8.0 Miscellaneous Information ................................................................................. 9 8.1 Measured Bandwidth / RF Output Signal............................................................ 9 8.2 Discussion of Pulse Desensitization ................................................................. 11 8.3 Calculation of Average Factor .......................................................................... 11 8.4 Emissions Test Procedures ............................................................................. 13 9.0 Equipment List .................................................................................................. 15 Report No.: 13051267HKG-001 iii FCC ID: SQ9XKT1291 IC: 5768A-XKT1291 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com

Issuing Laboratory: Intertek Testing Services Hong Kong Limited Hong Kong Accreditation Service (HKAS) has accredited this laboratory under the Hong Kong Laboratory Accreditation Scheme (HOKLAS) for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. The results shown in this report were determined by this laboratory in accordance with its terms of accreditation. 1.0 General Description 1.1 Product Description The equipment under test (EUT) is the Disney Continuity Mickey operating at three channels (2422MHz, 2446MHz and 2460MHz). The EUT is powered by 4.5VDC (3 x 1.5V “AAA” size battery). There are five model styles in Wireless music band. When the EUT is put together with other model style members in the band, it will sing and move along with other model style members as the members communicate via the three RF channels. After powered up, the EUT will scan the ambient field strength among the three channels. Then the EUT will dominate the channel of least ambient field strength. Antenna Type : Internal, Integral For electronic filing, the brief circuit description is saved with filename: descri.pdf. 1.2 Related Submittal(s) Grants The Certification procedure of transceiver (with FCC ID: SQ9XKT1292, SQ9XKT1293, SQ9XKT1294, SQ9XKT1295) for this transceiver (FCC ID: SQ9XKT1291) are being processed as the same time of this application. The receiver for this transceiver is exempted from the Part 15 technical rules per 15.101(b). 1.3 Test Methodology Radiated emission measurements were performed according to the procedures in ANSI C63.4 (2009). All radiated measurements were performed in an Open Area Test Site. Preliminary scans were performed in the Open Area Test Site only to determine worst case modes. All radiated tests were performed at an antenna to EUT distance of 3 meters, unless stated otherwise in the “Justification Section” of this Application. 1.4 Test Facility The open area test site used to collect the radiated data is located at Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. This test facility and site measurement data have been placed on file with the FCC and IC. Report No.: 13051267HKG-001 1 FCC ID: SQ9XKT1291 IC: 5768A-XKT1291 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com

Issuing Laboratory: Intertek Testing Services Hong Kong Limited Hong Kong Accreditation Service (HKAS) has accredited this laboratory under the Hong Kong Laboratory Accreditation Scheme (HOKLAS) for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. The results shown in this report were determined by this laboratory in accordance with its terms of accreditation. 2.0 System Test Configuration 2.1 Justification The system was configured for testing in a typical fashion (as a customer would normally use it), and in the confines as outlined in ANSI C63.4 (2009). The device was powered by 3 x new 1.5V “AAA” battery. For maximizing emissions, the EUT was rotated through 360°, the antenna height was varied from 1 meter to 4 meters above the ground plane, and the antenna polarization was changed. This step by step procedure for maximizing emissions led to the data reported in Exhibit 3.0. The unit was operated standalone and placed in the center of the turntable. The equipment under test (EUT) was configured for testing in a typical fashion (as a customer would normally use it). The EUT was mounted to a plastic stand if necessary and placed on the wooden turntable, which enabled the engineer to maximize emissions through its placement in the three orthogonal axes. 2.2 EUT Exercising Software There was no special software to exercise the device. Once the unit is powered up, it transmits the RF signal continuously. 2.3 Special Accessories There are no special accessories necessary for compliance of this product. 2.4 Equipment Modification Any modifications installed previous to testing by Hallmark Cards, Inc. will be incorporated in each production model sold/leased in the United States and Canada. No modifications were installed by Intertek Testing Services Hong Kong Ltd. 2.5 Measurement Uncertainty When determining of the test conclusion, the Measurement Uncertainty of test has been considered. Uncertainty and Compliance - Unless the standard specifically states that measured values are to be extended by the measurement uncertainty in determining compliance, all compliance determinations are based on the actual measured value. 2.6 Support Equipment List and Description N/A. Report No.: 13051267HKG-001 2 FCC ID: SQ9XKT1291 IC: 5768A-XKT1291 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com

Issuing Laboratory: Intertek Testing Services Hong Kong Limited Hong Kong Accreditation Service (HKAS) has accredited this laboratory under the Hong Kong Laboratory Accreditation Scheme (HOKLAS) for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. The results shown in this report were determined by this laboratory in accordance with its terms of accreditation. 3.0 Emission Results Data is included of the worst case configuration (the configuration which resulted in the highest emission levels). A sample calculation, configuration photographs and data tables of the emissions are included. 3.1 Field Strength Calculation The field strength is calculated by adding the Antenna Factor and Cable Factor, and subtracting the Amplifier Gain (if any), Average Factor (optional) from the measured reading. The basic equation with a sample calculation is as follows: FS = RA + AF + CF - AG - AV where FS = Field Strength in dBµV/m RA = Receiver Amplitude (including preamplifier) in dBµV CF = Cable Attenuation Factor in dB AF = Antenna Factor in dB AG = Amplifier Gain in dB AV = Average Factor in dB In the following table(s), the reading shown on the data table reflects the preamplifier gain. An example for the calculations in the following table is as follows: FS = RR + LF where FS = Field Strength in dBµV/m RR = RA - AG - AV in dBµV LF = CF + AF in dB Assume a receiver reading of 52.0 dBµV is obtained. The antenna factor of 7.4 dB and cable factor of 1.6 dB are added. The amplifier gain of 29 dB and average factor of 5 dB are subtracted, giving a field strength of 32 dBµV/m. This value in dBµV/m was converted to its corresponding level in µV/m. RA = 52.0 dBµV/m AF = 7.4 dB RR = 18.0 dBµV CF = 1.6 dB LF = 9.0 dB AG = 29.0 dB AV = 5.0 dB FS = RR + LF FS = 18 + 9 = 27 dBµV/m Level in µV/m = Common Antilogarithm [(27 dBµV/m)/20] = 22.4 µV/m Report No.: 13051267HKG-001 3 FCC ID: SQ9XKT1291 IC: 5768A-XKT1291 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com

Issuing Laboratory: Intertek Testing Services Hong Kong Limited Hong Kong Accreditation Service (HKAS) has accredited this laboratory under the Hong Kong Laboratory Accreditation Scheme (HOKLAS) for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. The results shown in this report were determined by this laboratory in accordance with its terms of accreditation. 3.2 Radiated Emission Configuration Photograph The worst case in radiated emission was found at 4844MHz, 4892MHz and 4920 MHz For electronic filing, the worst case radiated emission configuration photographs are saved with filename: radiated photos.pdf. 3.3 Radiated Emission Data The data on the following page lists the significant emission frequencies, the limit and the margin of compliance. Numbers with a minus sign are below the limit. Judgment: Passed by 0.8 dB margin compared with average limit Report No.: 13051267HKG-001 4 FCC ID: SQ9XKT1291 IC: 5768A-XKT1291 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com

Issuing Laboratory: Intertek Testing Services Hong Kong Limited Hong Kong Accreditation Service (HKAS) has accredited this laboratory under the Hong Kong Laboratory Accreditation Scheme (HOKLAS) for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. The results shown in this report were determined by this laboratory in accordance with its terms of accreditation. Applicant: Hallmark Cards, Inc. Date of Test: May 29-30, 2013 Model: XKT1291 Worst-Case Operating Mode: Transmitting Table 1 Radiated Emissions Pursuant to FCC Part 15 Section 15.249 Requirement Lowest Channel Pre-Amp Antenna Average Calculated Average Polari- Frequency Reading Gain Factor Factor at 3m Limit at 3m Margin zation (MHz) (dBμV) (dB) (dB) (dB) (dBμV/m) (dBμV/m) (dB) V 2422.000 96.8 33 29.4 18 75.2 94.0 -18.8 V 4844.000 69.3 33 34.9 18 53.2 54.0 -0.8 H 7266.000 50.5 33 37.9 18 37.4 54.0 -16.6 H 9688.000 45.8 33 40.4 18 35.2 54.0 -18.8 H 12110.000 45.5 33 40.5 18 35.0 54.0 -19.0 H 14532.000 46.9 33 38.4 18 34.3 54.0 -19.7 P re- Amp A n te n n a Ne t at P e a k L im it P o la r i- Fre q u e n cy R e a d in g G a in F a c to r 3m - Pea k at 3m M a rg in z a tio n (M H z ) (d B μ V ) (dB ) (dB ) (d B μ V /m ) ( d B μ V /m ) (dB ) V 2 422.000 9 6 .8 33 2 9 .4 9 3 .2 1 1 4 .0 - 2 0 .8 V 4 8 4 4 .0 0 0 6 9 .3 33 3 4 .9 7 1 .2 7 4 .0 - 2 .8 H 7 2 6 6 .0 0 0 5 0 .5 33 3 7 .9 5 5 .4 7 4 .0 -1 8 .6 H 9 688.000 4 5 .8 33 4 0 .4 5 3 .2 7 4 .0 - 2 0 .8 H 1 2 1 1 0 .0 0 0 4 5 .5 33 4 0 .5 5 3 .0 7 4 .0 -2 1 .0 H 1 4 5 3 2 .0 0 0 4 6 .9 33 3 8 .4 5 2 .3 7 4 .0 - 2 1 .7 NOTES: 1. Peak Detector Data unless otherwise stated. 2. All measurements were made at 3 meters. Harmonic emissions not detected at the 3-meter distances were measured at 0.3-meter and an inverse proportional extrapolation was performed to compare the signal level to the 3-meter limit. No other harmonic emissions than those reported were detected at a test distance of 0.3-meter. 3. Negative sign in the column shows value below limit. 4. Horn antenna is used for the emission over 1000MHz. 5. Emission (the row indicated by bold italic) within the restricted band meets the requirement of FCC Part 15 Section 15.205 / RSS-210 Section 2.2. Report No.: 13051267HKG-001 5 FCC ID: SQ9XKT1291 IC: 5768A-XKT1291 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com

Issuing Laboratory: Intertek Testing Services Hong Kong Limited Hong Kong Accreditation Service (HKAS) has accredited this laboratory under the Hong Kong Laboratory Accreditation Scheme (HOKLAS) for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. The results shown in this report were determined by this laboratory in accordance with its terms of accreditation. Applicant: Hallmark Cards, Inc. Date of Test: May 29-30, 2013 Model: XKT1291 Worst-Case Operating Mode: Transmitting Table 2 Radiated Emissions Pursuant to FCC Part 15 Section 15.249 Requirement Middle Channel Pre-Amp Antenna Average Calculated Average Polari- Frequency Reading Gain Factor Factor at 3m Limit at 3m Margin zation (MHz) (dBμV) (dB) (dB) (dB) (dBμV/m) (dBμV/m) (dB) V 2446.000 96.8 33 29.4 18 75.2 94.0 -18.8 V 4892.000 69.3 33 34.9 18 53.2 54.0 -0.8 H 7338.000 50.5 33 37.9 18 37.4 54.0 -16.6 H 9784.000 45.8 33 40.4 18 35.2 54.0 -18.8 H 12230.000 45.5 33 40.5 18 35.0 54.0 -19.0 H 14676.000 46.9 33 38.4 18 34.3 54.0 -19.7 P re- Amp A n te n n a Ne t at P e a k L im it P o la r i- Fre q u e n cy R e a d in g G a in F a c to r 3m - Pea k at 3m M a rg in z a tio n (M H z ) (d B μ V ) (d B ) (dB ) (d B μ V /m ) ( d B μ V /m ) (dB ) V 2 446.000 9 6 .8 33 2 9 .4 9 3 .2 1 1 4 .0 - 2 0 .8 V 4 8 9 2 .0 0 0 6 9 .3 33 3 4 .9 7 1 .2 7 4 .0 - 2 .8 H 7 3 3 8 .0 0 0 5 0 .5 33 3 7 .9 5 5 .4 7 4 .0 -1 8 .6 H 9 784.000 4 5 .8 33 4 0 .4 5 3 .2 7 4 .0 - 2 0 .8 H 1 2 2 3 0 .0 0 0 4 5 .5 33 4 0 .5 5 3 .0 7 4 .0 -2 1 .0 H 1 4 6 7 6 .0 0 0 4 6 .9 33 3 8 .4 5 2 .3 7 4 .0 - 2 1 .7 NOTES: 1. Peak Detector Data unless otherwise stated. 2. All measurements were made at 3 meters. Harmonic emissions not detected at the 3-meter distances were measured at 0.3-meter and an inverse proportional extrapolation was performed to compare the signal level to the 3-meter limit. No other harmonic emissions than those reported were detected at a test distance of 0.3-meter. 3. Negative sign in the column shows value below limit. 4. Horn antenna is used for the emission over 1000MHz. 5. Emission (the row indicated by bold italic) within the restricted band meets the requirement of FCC Part 15 Section 15.205 / RSS-210 Section 2.2. Report No.: 13051267HKG-001 6 FCC ID: SQ9XKT1291 IC: 5768A-XKT1291 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com

Issuing Laboratory: Intertek Testing Services Hong Kong Limited Hong Kong Accreditation Service (HKAS) has accredited this laboratory under the Hong Kong Laboratory Accreditation Scheme (HOKLAS) for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. The results shown in this report were determined by this laboratory in accordance with its terms of accreditation. Applicant: Hallmark Cards, Inc. Date of Test: May 29-30, 2013 Model: XKT1291 Worst-Case Operating Mode: Transmitting Table 3 Radiated Emissions Pursuant to FCC Part 15 Section 15.249 Requirement Highest Channel Pre-Amp Antenna Average Calculated Average Polari- Frequency Reading Gain Factor Factor at 3m Limit at 3m Margin zation (MHz) (dBμV) (dB) (dB) (dB) (dBμV/m) (dBμV/m) (dB) V 2460.000 96.8 33 29.4 18 75.2 94.0 -18.8 V 4920.000 69.3 33 34.9 18 53.2 54.0 -0.8 H 7380.000 50.5 33 37.9 18 37.4 54.0 -16.6 H 9840.000 45.8 33 40.4 18 35.2 54.0 -18.8 H 12300.000 45.5 33 40.5 18 35.0 54.0 -19.0 H 14760.000 46.9 33 38.4 18 34.3 54.0 -19.7 P re- Amp A n te n n a Net at P e a k L im it P o la r i- Fre q u e n cy R e a d in g G a in F a c to r 3m - Peak at 3m M a rg in z a tio n (M H z ) (d B μ V ) (d B ) (dB ) (d B μ V /m ) ( d B μ V /m ) (dB ) V 2 460.000 9 6 .8 33 2 9 .4 9 3 .2 1 1 4 .0 - 2 0 .8 V 4 9 2 0 .0 0 0 6 9 .3 33 3 4 .9 7 1 .2 7 4 .0 - 2 .8 H 7 3 8 0 .0 0 0 5 0 .5 33 3 7 .9 5 5 .4 7 4 .0 -1 8 .6 H 9 840.000 4 5 .8 33 4 0 .4 5 3 .2 7 4 .0 - 2 0 .8 H 1 2 3 0 0 .0 0 0 4 5 .5 33 4 0 .5 5 3 .0 7 4 .0 -2 1 .0 H 1 4 7 6 0 .0 0 0 4 6 .9 33 3 8 .4 5 2 .3 7 4 .0 - 2 1 .7 NOTES: 1. Peak Detector Data unless otherwise stated. 2. All measurements were made at 3 meters. Harmonic emissions not detected at the 3-meter distances were measured at 0.3-meter and an inverse proportional extrapolation was performed to compare the signal level to the 3-meter limit. No other harmonic emissions than those reported were detected at a test distance of 0.3-meter. 3. Negative sign in the column shows value below limit. 4. Horn antenna is used for the emission over 1000MHz. 5. Emission (the row indicated by bold italic) within the restricted band meets the requirement of FCC Part 15 Section 15.205 / RSS-210 Section 2.2. Report No.: 13051267HKG-001 7 FCC ID: SQ9XKT1291 IC: 5768A-XKT1291 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com

Issuing Laboratory: Intertek Testing Services Hong Kong Limited Hong Kong Accreditation Service (HKAS) has accredited this laboratory under the Hong Kong Laboratory Accreditation Scheme (HOKLAS) for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. The results shown in this report were determined by this laboratory in accordance with its terms of accreditation. 4.0 Equipment Photographs For electronic filing, the photographs are saved with filename: external photos.pdf and internal photos.pdf. 5.0 Product Labelling For electronics filing, the FCC ID and IC label artwork and the label location are saved with filename: label.pdf. 6.0 Technical Specifications For electronic filing, the block diagram and schematic of the tested EUT are saved with filename: block.pdf and circuit.pdf respectively. 7.0 Instruction Manual For electronic filing, a preliminary copy of the Instruction Manual is saved with filename: manual.pdf. This manual will be provided to the end-user with each unit sold/leased in the United States and Canada. Report No.: 13051267HKG-001 8 FCC ID: SQ9XKT1291 IC: 5768A-XKT1291 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com

Issuing Laboratory: Intertek Testing Services Hong Kong Limited Hong Kong Accreditation Service (HKAS) has accredited this laboratory under the Hong Kong Laboratory Accreditation Scheme (HOKLAS) for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. The results shown in this report were determined by this laboratory in accordance with its terms of accreditation. 8.0 Miscellaneous Information The miscellaneous information includes details of the test procedure and measured bandwidth / calculation of factor such as pulse desensitization and averaging factor (calculation and timing diagram). 8.1 Measured Bandwidth From the following plots, they show that the fundamental emissions are confined in the specified band (2400MHz to 2483.5MHz). In case of the fundamental emissions are within two standard bandwidths from the bandedge, the delta measurement technique is used for determining bandedge compliance. Standard bandwidth is the bandwidth specified by ANSI C63.4 (2009) for frequency being measured. Emissions radiated outside of the specified frequency bands, except harmonics, are attenuated by 50dB below the level of the fundamental or to the general radiated emissions limits in Section 15.209 / Table 5 of RSS-Gen, whichever is the lesser attenuation, which meet the requirement of part 15.249(d) / RSS-210 A2.9(b). Report No.: 13051267HKG-001 9 FCC ID: SQ9XKT1291 IC: 5768A-XKT1291 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com

Issuing Laboratory: Intertek Testing Services Hong Kong Limited Hong Kong Accreditation Service (HKAS) has accredited this laboratory under the Hong Kong Laboratory Accreditation Scheme (HOKLAS) for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. The results shown in this report were determined by this laboratory in accordance with its terms of accreditation. Peak Measurement Bandedge compliance is determined by applying marker-delta method, i.e. (Bandedge Plot). Fundamental Emission Peak Resultant Peak (peak value) Delta Field Strength Limit Margin Channel (dBuV/m) (dB) (dBuV/m) (dBuV/m) (dB) Lowest 93.2 40.04 53.16 74 -20.84 Highest 93.2 40.41 52.79 74 -21.21 Fundamental Emission Average Resultant Average (average value) Delta Field Strength Limit Margin Channel (dBuV/m) (dB) (dBuV/m) (dBuV/m) (dB) Lowest 75.2 40.04 35.16 54 -18.84 Highest 75.2 40.41 34.79 54 -19.21 The resultant field strength meets the general radiated emission limit in section 15.209, which does not exceed 74 dBµV/m (Peak Limit) and 54 dBµV/m (Average Limit). Report No.: 13051267HKG-001 10 FCC ID: SQ9XKT1291 IC: 5768A-XKT1291 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com

Issuing Laboratory: Intertek Testing Services Hong Kong Limited Hong Kong Accreditation Service (HKAS) has accredited this laboratory under the Hong Kong Laboratory Accreditation Scheme (HOKLAS) for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. The results shown in this report were determined by this laboratory in accordance with its terms of accreditation. 8.2 Discussion of Pulse Desensitization Pulse desensitivity is not applicable for this device. The effective period (Teff) is approximately 12.48ms for a digital “1” bit which illustrated on technical specification, with a resolution bandwidth (3dB) of 3MHz, so the pulse desensitivity factor is 0dB. 8.3 Calculation of Average Factor The duty cycle is simply the on-time divided by the period: The duration of one cycle = 100 ms Effective period of the cycle = 320us x (13 x 3) = 12.48ms DC = 12.48/100 = 0.1248 Therefore, the averaging factor is found by 20log 0.1248 = -18.0dB. Report No.: 13051267HKG-001 11 FCC ID: SQ9XKT1291 IC: 5768A-XKT1291 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com

Issuing Laboratory: Intertek Testing Services Hong Kong Limited Hong Kong Accreditation Service (HKAS) has accredited this laboratory under the Hong Kong Laboratory Accreditation Scheme (HOKLAS) for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. The results shown in this report were determined by this laboratory in accordance with its terms of accreditation. Report No.: 13051267HKG-001 12 FCC ID: SQ9XKT1291 IC: 5768A-XKT1291 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com

Issuing Laboratory: Intertek Testing Services Hong Kong Limited Hong Kong Accreditation Service (HKAS) has accredited this laboratory under the Hong Kong Laboratory Accreditation Scheme (HOKLAS) for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. The results shown in this report were determined by this laboratory in accordance with its terms of accreditation. 8.4 Emissions Test Procedures The following is a description of the test procedure used by Intertek Testing Services Hong Kong Ltd. in the measurements of transmitter operating under the Part 15, Subpart C rules. The test set-up and procedures described below are designed to meet the requirements of ANSI C63.4 (2009). A typical or an unmodulated CW signal at the operating frequency of the EUT has been supplied to the EUT for all measurements. Such a signal is supplied by a signal generator and an antenna in close proximity to the EUT. The signal level is sufficient to stabilize the local oscillator of the EUT. The transmitting equipment under test (EUT) is placed on a wooden turntable which is four feet in diameter and approximately one meter in height above the ground plane. During the radiated emissions test, the turntable is rotated and any cables leaving the EUT are manipulated to find the configuration resulting in maximum emissions. The EUT is adjusted through all three orthogonal axis to obtain maximum emission levels. The antenna height and polarization are also varied during the testing to search for maximum signal levels. The height of the antenna is varied from one to four meters. Detector function for radiated emissions is in peak mode. Average readings, when required, are taken by measuring the duty cycle of the equipment under test and subtracting the corresponding amount in dB from the measured peak readings. A detailed description for the calculation of the average factor can be found in Exhibit 8.3. The frequency range scanned is from the lowest radio frequency signal generated in the device which is greater than 9 kHz to the tenth harmonic of the highest fundamental frequency or 40 GHz, whichever is lower. Report No.: 13051267HKG-001 13 FCC ID: SQ9XKT1291 IC: 5768A-XKT1291 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com

Issuing Laboratory: Intertek Testing Services Hong Kong Limited Hong Kong Accreditation Service (HKAS) has accredited this laboratory under the Hong Kong Laboratory Accreditation Scheme (HOKLAS) for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. The results shown in this report were determined by this laboratory in accordance with its terms of accreditation. 8.4 Emissions Test Procedures (cont’d) The EUT is warmed up for 15 minutes prior to the test. AC power to the unit is varied from 85% to 115% nominal and variation in the fundamental emission field strength is recorded. If battery powered, a new, fully charged battery is used. Conducted measurements were made as described in ANSI C63.4 (2009). The IF bandwidth used for measurement of radiated signal strength was 100 kHz or greater when frequency is below 1000 MHz. Where pulsed transmissions of short enough pulse duration warrant, a greater bandwidth is selected according to the recommendations of Hewlett Packard Application Note 150-2. A discussion of whether pulse desensitivity is applicable to this unit is included in this report (See Exhibit 8.1). Above 1000 MHz, a resolution bandwidth of 1 MHz is used. Transmitter measurements are normally conducted at a measurement distance of three meters. However, to assure low enough noise floor in the forbidden bands and above 1 GHz, signals are acquired at a distance of one meter or less. All measurements are extrapolated to three meters using inverse scaling, unless otherwise reported. Measurements taken at a closer distance are so marked. Report No.: 13051267HKG-001 14 FCC ID: SQ9XKT1291 IC: 5768A-XKT1291 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com

Issuing Laboratory: Intertek Testing Services Hong Kong Limited Hong Kong Accreditation Service (HKAS) has accredited this laboratory under the Hong Kong Laboratory Accreditation Scheme (HOKLAS) for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. The results shown in this report were determined by this laboratory in accordance with its terms of accreditation. 9.0 Equipment List 1) Radiated Emissions Test Equipment EMI Test Receiver Spectrum Analyzer Biconical Antenna Registration No. EW-2500 EW-2188 EW-0571 Manufacturer R&S AGILENTTECH EMCO Model No. ESCI E4407B 3104C Calibration Date Mar. 22, 2013 Nov. 05, 2012 Apr. 05, 2012 Calibration Due Date Feb. 28, 2014 Nov. 05, 2013 Oct. 05, 2013 Equipment Log Periodic Antenna Double Ridged Broad-Band Horn (200 - 1000)MHz Guide Antenna Antenna with frequency range 14G - 40GHz Registration No. EW-1042 EW-1015 EW-1679 Manufacturer EMCO EMCO SCHWARZBECK Model No. 3148 3115 BBHA9170 Calibration Date Apr. 25, 2012 Mar. 5, 2013 Apr. 01, 2013 Calibration Due Date Oct. 25, 2013 Sept. 5, 2014 Apr. 01, 2014 2) Bandedge Measurement Equipment Spectrum Analyzer Registration No. EW-2253 Manufacturer R&S Model No. FSP40 Calibration Date Apr. 24, 2013 Calibration Due Date Apr. 24, 2014 Report No.: 13051267HKG-001 15 FCC ID: SQ9XKT1291 IC: 5768A-XKT1291 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com


Document Created: 2019-11-09 12:39:14
Document Modified: 2019-11-09 12:39:14
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC