RF Exposure

FCC ID: SMH-35051

RF Exposure Info

Download: PDF

FCCID_2906812

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ151023008-00RX

FCC §15.247 (i) & §1.1307 (b) (1) & §2.1091- MAXIMUM PERMISSIBLE
EXPOSURE (MPE)
Applicable Standard
According to subpart 15.247 (i) and subpart 1.1307 (b)(1), 2.1091 systems operating under the provisions
of this section shall be operated in a manner that ensures the public is not exposed to RF energy level in
excess of the communication guidelines.

Limits for General Population/Uncontrolled Exposure

Limits for General Population/Uncontrolled Exposure
Frequency Electric Field Magnetic Field Power Averaging
Range Strength Strength Density Time
(MHz) (V/m) (A/m) (mW/cm2) (Minutes)
0.3-1.34 614 1.63 *(100) 30
2
1.34-30 824/f 2.19/f *(180/f ) 30
30-300 27.5 0.073 0.2 30
300-1500 / / f/1500 30
1500-100,000 / / 1.0 30

f = frequency in MHz
* = Plane-wave equivalent power density

Result
Calculated Formulary:

Predication of MPE limit at a given distance

PG
S=
4R 2
S = power density (in appropriate units, e.g. mW/cm2)
P = power input to the antenna (in appropriate units, e.g., mW).
G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain
factor, is normally numeric gain.
R = distance to the center of radiation of the antenna (appropriate units, e.g., cm)

Turn-up Evaluation Power
Frequency Antenna Gain MPE Limit
Conducted Power Distance Density
(MHz) (mW/cm2)
(dBi) (numeric) (dBm) (mW) (cm) (mW/cm2)
2410.875 2 1.58 17.10 51.29 20 0.016 1.0

Note: To maintain compliance with the FCC’s RF exposure guidelines, place the equipment at least 20cm
from nearby persons.

Result: Compliance

FCC Part 15.247 Page 8 of 36

Document Created: 2017-11-18 15:43:15
Document Modified: 2017-11-18 15:43:15

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC