MPE

FCC ID: SLE-AWK-3121

RF Exposure Info

Download: PDF
FCCID_950960

                                                                            Report No. 084316R-RFUSP05V01




            RF Exposure Evaluation declaration



Product Name : Industrial IEEE 802.11a/b/g wireless Access Point/Bridge/Client
Model No.          : AWK-3121-US, AWK-3121-US-T
FCC ID             : SLE-AWK-3121




     Applicant : Moxa Technologies Co., Ltd
     Address : Fl.4, No. 135, Lane 235, Pao-Chiao Rd., Shing Tien City,
                      Taipei, Taiwan, R.O.C.




                           Date of Receipt        : Apr. 18, 2008

                           Date of Declaration : May. 19, 2008

                           Report No.             : 084316R-RFUSP05V01




  The declaration results relate only to the samples calculated.
  The declaration shall not be reproduced except in full without the written approval of QuieTek Corporation.
  This report must not be used to claim product endorsement by NVLAP any agency of the U.S. Government




                                               Page: 1 of 4                                          Version: 1.0


                                                                          Report No. 084316R-RFUSP05V01


1.      RF Exposure Evaluation

1.1.    Limits

        According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the
        environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b)
        LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE)
        Frequency Range       Electric Field       Magnetic Field      Power Density        Average Time
                                                                                 2
        (MHz)                 Strength (V/m)       Strength (A/m)      (mW/cm )             (Minutes)
                                    (A) Limits for Occupational/ Control Exposures
              300-1500                   --                    --             F/300                  6
           1500-100,000                  --                    --                5                   6
                              (B) Limits for General Population/ Uncontrolled Exposures
              300-1500                   --                    --             F/1500                 6
           1500-100,000                  --                    --                1                   30
        F= Frequency in MHz


       Friis Formula
       Friis transmission formula: Pd = (Pout*G)/(4*pi*r2)


       Where
       Pd = power density in mW/cm2
       Pout = output power to antenna in mW
       G = gain of antenna in linear scale
       Pi = 3.1416
       R = distance between observation point and center of the radiator in cm


       Pd id the limit of MPE, 1 mW/cm2 . If we know the maximum gain of the antenna and the total power
       input to the antenna, through the calculation, we will know the distance r where the MPE limit is
       reached.



1.2.    Test Procedure

         Software provided by client enabled the EUT to transmit and receive data at lowest, middle and
         highest channel individually.
         The temperature and related humidity: 18℃and 78% RH.




                                                Page: 2 of 4                                     Version: 1.0


                                                                             Report No. 084316R-RFUSP05V01




1.3.        Test Result of RF Exposure Evaluation

            Product        :    Industrial IEEE 802.11a/b/g wireless Access Point/Bridge/Client
            Test Item      :    RF Exposure Evaluation
            Test Site      :    CTR1


Antenna Gain
Antenna Gain: The maximum Gain measured in fully anechoic chamber is 2.0dBi in logarithm scale.


802.11b (2412~2462MHz)
Output Power Into Antenna & RF Exposure Evaluation Distance (2.0dBi):
                                              Output Power to Antenna       Power Density at R = 20 cm
   Channel              Frequency (MHz)
                                                        (mW)                        (mW/cm2)
       1                    2412.00                    54.8277                       0.017287
       6                    2437.00                    98.4011                       0.031026
       11                   2462.00                    39.8107                       0.012553


The distance r (4th column) calculated from the Fries transmission formula is far shorter than 20 cm
separation requirement.


802.11g (2412~2462MHz)
Output Power Into Antenna & RF Exposure Evaluation Distance (2.0dBi):
                                              Output Power to Antenna       Power Density at R = 20 cm
   Channel              Frequency (MHz)
                                                        (mW)                        (mW/cm2)
       1                    2412.00                    42.3643                       0.013358
       6                    2437.00                   199.5262                       0.062912
       11                   2462.00                    36.4754                       0.011501


The distance r (4th column) calculated from the Fries transmission formula is far shorter than 20 cm
separation requirement.




                                                   Page: 3 of 4                                   Version: 1.0


                                                                      Report No. 084316R-RFUSP05V01



802.11a (5180~5240MHz)
Output Power Into Antenna & RF Exposure Evaluation Distance (2.0dBi):
                                         Output Power to Antenna     Power Density at R = 20 cm
   Channel        Frequency (MHz)
                                                  (mW)                       (mW/cm2)
       1                  5180.00                17.4582                      0.005505
       3                  5220.00                28.4446                      0.008969
       4                  5240.00                16.3682                      0.005161


The distance r (4th column) calculated from the Fries transmission formula is far shorter than 20 cm
separation requirement.


802.11a (5745~5825MHz)
Output Power Into Antenna & RF Exposure Evaluation Distance (2.0dBi):
                                         Output Power to Antenna     Power Density at R = 20 cm
   Channel        Frequency (MHz)
                                                  (mW)                       (mW/cm2)
       5                  5745.00               183.2314                      0.057774
       7                  5785.00               194.5360                      0.061338
       8                  5825.00               210.3778                      0.066333


The distance r (4th column) calculated from the Fries transmission formula is far shorter than 20 cm
separation requirement.




                                             Page: 4 of 4                                  Version: 1.0



Document Created: 2008-05-29 09:38:56
Document Modified: 2008-05-29 09:38:56

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC