Radio Frequency Exposure

FCC ID: SL6-BEEKSBLUFI

RF Exposure Info

Download: PDF
FCCID_3029746

www.tuv.com Maximum transmitter power: 802.11b Frequency (MHz) Maximum peak output power (dBm) Output power(mW) 2412 12.2 16.60 2437 13.8 23.99 2462 13.1 20.42 802.11g Frequency (MHz) Maximum peak output power (dBm) Output power(mW) 2412 14.8 30.20 2437 16.3 42.66 2462 14.8 30.20 802.11n Frequency (MHz) Maximum peak output power (dBm) Output power(mW) 2412 14.1 25.70 2437 15.5 35.48 2462 14.4 27.54 BLE Frequency (MHz) Maximum peak output power (dBm) Output power(mW) 2402 0.5 1.13 2440 -3.5 0.45 2480 -1.9 0.65 According to the manufacturer’s installation instruction, the EUT operating in standalone mobile exposure conditions which minimum test separation distance is 20cm between the antenna and radiating structures of the device and nearby persons. For Maximum Permissible Exposure (MPE) evaluation, the maximum power density at 20 cm from this mobile transmitter shall be less than the General Population / Uncontrolled MPE limit in OET Bulletin 65 and meet the requirement listed in KDB447498. Evaluation: The maximum conducted output power of WIFI is 42.66mW, The power density at 20cm = (42.66mW x 1)/4πR2 = 0.0085 mWcm-2 The maximum conducted output power of BLE is 1.13mW, The power density at 20cm = (1.13mW x 1)/4πR2 = 0.000225 mWcm-2 Sum of the MPE ratios for all simultaneous transmitting antennas = 0.0085/1 + 0.000225/1 = 0.008725 Conclusion: -2 In the frequency range of 1,500 - 100,000MHz, the MPE limit is 1.0 mWcm for general population and uncontrolled exposure. As the measured power density at 20cm from the transmitter is lower than the MPE limit, the compliance to the MPE limit can be ensured by indicating the minimum 20cm separation between the transmitter's radiating structures and body of the user or nearby persons. The sum of the MPE ratios for all simultaneous transmitting antennas is <=1.0, therefore, simultaneous transmission MPE test exclusion applied. Test Report No.: 14037985 001 Appendix 5 Page 2 of 2


Document Created: 2016-06-07 14:28:08
Document Modified: 2016-06-07 14:28:08
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC