Modular Approval Letter

FCC ID: SK9SNIC1

Cover Letter(s)

Download: PDF
FCCID_3461156

Federal Communications Commission Date: March 7, 2017 P.O. Box 429 Columbia, MD 21045 RE: Application for Modular Approval Certification for the FCC ID: SK9SNIC1 register module Dear Sir or Madam: The following information addresses the requirements to support a modular approval as required by FCC Part 15.212, Modular Transmitters. 1. The transmitter section is shielded. Testing has been performed to assure compliance. 2. The SNIC1 does not have external modulation or data inputs. The RF section is driven by an on- board MCU which controls RF data lines and does not allow excessive modulation. 3. The modular transmitter has its own power regulation. 4. The frequency hopping and the Wi-Fi transmitter antennas are permanently imbedded in a circuit board attached to the module. 5. The SNIC1 module was tested in a standalone configuration. 6. The SNIC1 register module will be labeled as required. The host equipment will also have the required labeling. 7. Operating requirements are included in the host technical manual. 8. MPE measurements are provided to demonstrate RF compliance. There is a cautionary statement that is included in the technical manual stipulating the 20 cm separation distance. Sincerely, Name: Lee Littlejohn Signature: Title: Regulatory Engineer Date: March 7, 2017


Document Created: 2017-06-14 08:40:55
Document Modified: 2017-06-14 08:40:55
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC